Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1600280013 is a Combination Line Connector with 32 contacts, SYNDIOTACTIC POLYSTYRENE insulator. It has dimensions of 1.293" x 0.775" x 1.079", suitable for cable mounting applications. Operating temperature range from -40°C to 85°C, making it ideal for various industrial uses.
Median Price
$0.722
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.380
100+ parts
$0.917
1k+ parts
$0.785
10k+ parts
$0.658
DigiKey
$1.530
$1.107
$0.941
$0.882
Verical
-
$0.715
$0.686
Chip1Stop
$0.714
Master Electronics
$0.704
$0.632
Powell Electronics
$0.730
Digiode
$0.699
Nova Conductors
$0.819
Vyrian
VNN
IBS Electronics
$0.650
$0.563
TME
$0.780
Semicontronic
$0.550
$0.536
$0.534
Corphita
$0.662
Continental Prestige Electronics
$0.803
Argo Parts USA
Netroflash
$0.778
$0.762
Andel Nordic
$3.702
$3.554
Aztec Data Supply Inc.
$4.340
Perfect Parts
EMSNET (Excess)
1.293 inch - The compact size of the body makes this connector easy to fit into tight spaces.
YES - The ability to accommodate mixed contacts makes this connector versatile and adaptable to different connection types.
0.775 inch - The slim design of the body allows for efficient use of space in cable connections.
1.079 inch - The ample depth of the body ensures secure and stable connections.
SYNDIOTACTIC POLYSTYRENE - The high-quality insulator material provides excellent electrical insulation and durability.
5 - The multiple rows of contacts loaded in this connector allow for increased connectivity options.
85 - The high maximum operating temperature ensures optimal performance even in challenging environments.
40 °C - The low minimum operating temperature makes this connector suitable for a wide range of applications.
COMBINATION LINE CONNECTOR - This connector type is versatile and can accommodate various types of connections for added convenience.
32 - The high number of contacts allows for multiple connections to be made simultaneously.
CABLE - The cable mounting type makes this connector easy to install and secure in place.
2005010323 , 2005020323 - The mating information provided ensures compatibility with other connectors for seamless connection.
CRIMP - The crimp termination type allows for quick and secure connections to be made without the need for soldering.
FEMALE - The female contact gender is commonly used for connecting with male contacts, providing a universal connection option.
RECEPTACLE - The receptacle body or shell style allows for easy insertion and removal of connectors for simplified maintenance.
HYBRID - The hybrid contact style combines different contact types for maximum flexibility in connection options.
Combination Line Connectors 1600280013 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
1600280013 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - 160028001y Tool Duplication 12/Jan/2024
PCN Packaging - Mult Devs Packaging/Quantity 06/Sep/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
SPC TECHNOLOGY/ MULTICOMP
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1-1418448-1
TE Connectivity
TE Connectivity 1-1418448-1 is a Combination Line Connector with dimensions of 1.417"x.728"x1.211". Rated for 60V, it operates b/w -40°C to 140°C. Ideal for cable mounting applications, it has a signal current rating of 20A and UL Flammability Code of 94V-0.
DT04-12PA-P026
TE Connectivity's DT04-12PA-P026 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact gender and UL flammability rating of 94V-0.
1-480700-0
TE Connectivity 1-480700-0 is a Combination Line Connector with 0.8" body length, 1000000000 ohm insulation resistance, and 105°C max operating temp. Ideal for cable mounting applications, featuring POLYAMIDE insulator material and FEMALE contact gender.
DT06-12SA-CE11
TE Connectivity's DT06-12SA-CE11 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style with strain relief option.
174044-2
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Empty Shell: NO; IEC Conformity: NO;
AT04-3P-PM11
Amphenol
The Amphenol AT04-3P-PM11 is a male combination line connector with 3 contacts, rated at 13A. It has a body size of 2.19" x 1.46" x 0.673", made of polyethylene for use in cable and panel mounting applications. Operating temperatures range from -55°C to 125°C, suitable for various industrial environments.
DTM04-6P
TE Connectivity's DTM04-6P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, current rating of 7.5A, and operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized male contact style with strain relief option.
0-0282104-1
TE Connectivity 0-0282104-1 is a Combination Line Connector with dimensions of 0.78"x.543"x1.654". Rated for 24V, it operates b/w -40 to 125°C. With GLASS FILLED PA insulator and POLARIZED key, it has 2 contacts for cable mounting applications.
12162000
Aptiv
Aptiv's 12162000 is a Combination Line Connector with POLYAMIDE66 insulator. It has 2 contacts, male gender, and crimp termination. Used for cable mounting applications with mating info 12052641.
9-966140-6
TE Connectivity's 9-966140-6 is a Combination Line Connector with 3 rows, 21 contacts, and rated voltage of 24V. With a body length of 2.008" and width of 0.791", it operates b/w -40°C to 100°C. Ideal for applications requiring a male solder termination in panel mounting at right angles.
DT15-08PA-G003
TE Connectivity's DT15-08PA-G003 is a 2-row combination line connector with dimensions of 1.545" x 2.17" x 1.19". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring a polarized design with solder termination.
19418-0005
Molex
Molex 19418-0005 is a COMBINATION LINE CONNECTOR with 4 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for automotive, industrial, and consumer electronics applications.
174046-2
TE Connectivity's 174046-2 is a combination line connector with a mating contact pitch of 0.098 inches. It has a body length of 0.728 inch and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications due to its reliability and polarization key feature.
AT06-4S-RD01
The Amphenol AT06-4S-RD01 is a combination line connector with 4 contacts, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. With a body size of 0.862" x 0.717" x 1.244", it's ideal for cable mounting applications requiring female SQ PIN-SKT contacts in a plug shell style.
12047931
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Additional Features: COMPATIBLE CONTACT: 12045773; 12077628;
12015798
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Insulator Material: POLYAMIDE6; Total No. of Contacts: 4;
966140-6
TE Connectivity's 966140-6 is a Combination Line Connector with 21 contacts, rated at 24V. It has a body length of 2.008" and width of 0.791", suitable for panel mounting applications. With a temperature range from -40 to 100°C, it offers solder termination and right-angle mounting style.
DT06-3S-EP11
TE Connectivity's DT06-3S-EP11 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 3 contacts, rated at 13A, suitable for cable mounting applications.
2-1971775-3
TE Connectivity 2-1971775-3 is a Combination Line Connector with dimensions of 1.083" x 0.907" x 0.907". Rated for 600V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -55 to 105 °C. Ideal for applications requiring a male SQ PIN-SKT contact style, such as panel mounting in UL-standardized systems.
ATP04-2P-EC01
The Amphenol ATP04-2P-EC01 is a Combination Line Connector with Polyethylene insulator, rated for 25A signal current. Operating temperature range from -55 to 125°C. Ideal for cable mounting applications requiring crimp termination, featuring a receptacle shell style and round pin/socket contact gender.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1600140011
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Empty Shell: NO; Contact Material: NOT SPECIFIED;
160074-0002
Molex 160074-0002 is a 20-contact combination line connector with 2 loaded rows. It features glass-filled polyamide6 shell material, UL reference standard, and crimp termination. Ideal for cable mounting applications requiring female contact gender in receptacle body style.
1600783024
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 8; Termination Contact Finish: NOT APPLICABLE; Insulator Material: POLYAMIDE;
1600733107
The Molex 1600733107 is a Combination Line Connector with 3 contacts, made of POLYAMIDE. It has a body length of 1.11" and width of 0.906", suitable for cable mounting with crimp termination. Operating temperature ranges from -40°C to 125°C, ideal for various applications requiring female contact gender in receptacle style connectors.
1600140003
COMBINATION LINE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1600270013
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: .775 inch; Termination Contact Finish: NOT APPLICABLE; Body Length: 1.293 inch;
1600270014
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 85; Contact Style: HYBRID; Body Width: .775 inch;
1600270018
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.293 inch; Insulator Material: SYNDIOTACTIC POLYSTYRENE; Empty Shell: NO;
1600280012
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mounting Type: CABLE; Filter Feature: NO;
1600280015
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: .775 inch; Body Depth: 1.079 inch; Termination Contact Finish: NOT APPLICABLE;
1600290012
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Empty Shell: NO; Body Width: .728 inch;
1600290014
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.293 inch; Termination Type: CRIMP; Mixed Contacts: YES;
1600270015
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: SYNDIOTACTIC POLYSTYRENE; Body Depth: 1.079 inch; Maximum Operating Temperature (Cel): 85;
1600280014
Molex 1600280014 is a Combination Line Connector with 32 contacts, SYNDIOTACTIC POLYSTYRENE insulator. It has 5 rows, operates b/w -40 to 85°C, and uses crimp termination. Ideal for cable mounting applications requiring female contact gender and hybrid contact style.
1600280017
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: HYBRID; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED;
1600290013
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Insulator Material: SYNDIOTACTIC POLYSTYRENE;
1600270012
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: HYBRID; Mating Info.: 2005010252 , 2005020252; Total No. of Contacts: 25;
1600270011
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 5; Mounting Type: CABLE; Body Width: .775 inch;
1600280011
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 5; Body Length: 1.293 inch; Filter Feature: NO;
1600260003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Insulator Material: SYNDIOTACTIC POLYSTYRENE; Mixed Contacts: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved