Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1241404-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 15 to 13 AWG, rated for 26A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.086" to 0.118".
Median Price
$0.243
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
TTI Europe
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Mouser Electronics
$0.263
DigiKey
$0.260
Master Electronics
$0.174
Verical
$0.226
Vyrian
Electro Sonic
$0.217
IBS Electronics
$0.244
VNN
Nova Conductors
Perfect Parts
EMSNET (Excess)
Bastille Electronics
Authorized Procurement Solutions
Crimp terminals provide a reliable and secure connection between the wire and the terminal, ensuring stable performance.
Accommodating a minimum cable entry of 0.086 inch allows for flexibility in using a variety of wire sizes, making it suitable for different applications.
With a maximum operating temperature of 140°C, this product can withstand high temperature environments, ensuring durability and reliability.
Stamped contact design ensures consistent performance and reliability, making it a suitable choice for various electrical applications.
The ability to operate at a minimum temperature of -40°C makes this product suitable for use in cold environments, enhancing its versatility.
Designed to accommodate wire gauge up to 13 AWG, this product can handle thicker wires, allowing for a wide range of applications.
The cross-section area of 2.5 mm2 allows for efficient electricity conduction, making this product a reliable choice for electrical connections.
With a rated current of 26 A, this product can handle higher electrical loads, making it suitable for applications requiring high current capacity.
Accommodating a maximum cable entry of 0.118 inch allows for the use of larger wire sizes, increasing the product's versatility.
Featuring a female contact gender, this product is compatible with male connectors, making it easy to integrate into various electrical systems.
Assembly Products 1241404-3 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - Mult Devs Document Clarification 28/Sep/2021
PCN Assembly/Origin - Tooling Capacity 27/SEP/2022
PCN Packaging - Change in Delivery Unit & Minimum Order Quantity 15/MAY/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
927771-3
TE Connectivity
TE Connectivity's 927771-3 is a CRIMP terminal with stamped contact design. It has a wire gauge of 17 AWG, rated for 30A current. Ideal for power applications, it can accommodate cables from 0.055 to 0.09 inch and operates b/w -40 to 130°C.
SPHD-001T-P0.5
J S T Mfg
SPHD-001T-P0.5 by J S T Mfg is a CRIMP terminal for PBV SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.039-0.059 inch cable entry. Ideal for 26-22 AWG wires in applications requiring FEMALE contacts at -25 to 85 °C temperature range.
M23053/5-111-9
Dunbar Products
ASSEMBLY ITEMS; Construction: SINGLE WALL; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
172063-0312
Molex
The Molex 172063-0312 CONTACT features CRIMP terminal type, FEMALE contact gender, and COPPER ALLOY material. It is used with wire sizes up to 12 AWG in applications such as 170001 and 171692 assemblies. The CONTACT has a finish thickness of 15 units and a terminal length of 0.298 inch for STRAIGHT mounting style.
1SNK900101R0000
Abb
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel;
39-00-0217
Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.
643075-2
TE Connectivity 643075-2, an Assembly Product with UL approval, features MTA-100 connector usage. With a temp range of -40 to 85°C, it supports up to 0 AWG wire size. Made of polyamide, it is ideal for various electrical assembly applications.
226537-1
TE Connectivity 226537-1 CONTACT features TPX insulator, 30 finish thickness, and brass material. Ideal for RD 316, RG 161, RG 174 cables with a max wire size of 0 AWG. Designed for power and signal applications with straight mounting style and male contact gender.
M23053/5-102-0
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
09300160301
Harting Electronics & Kg
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: HOUSING; IEC Conformity: NO; DIN Conformity: NO;
0462-203-12141
TE Connectivity's 0462-203-12141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 12-14 AWG wires at 25A current. Ideal for SIGNAL applications requiring FEMALE ROUND PIN-SOCKET contacts in STRAIGHT mounting style.
WP-4P
WP-4P by TE Connectivity is an Assembly Product designed for DTP SERIES applications. It features a temperature range of -55 to 125°C, supports wire sizes up to 0 AWG, and is made of Polybutylene Terephthalate. Ideal for power and signal connections in various industries.
1-967067-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
13697414
Aptiv
Aptiv 13697414 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0551-0.0748 inch cable entry. Ideal for automotive wiring harness assemblies due to its precise crimping and compatibility with specified cable types.
42815-0144
Molex 42815-0144 is a female contact for Mini Fit connectors. Made of copper alloy, it supports wire sizes from 16 to 14 AWG. With a bellowed type design and straight mounting style, it is ideal for power applications with a finish thickness of 10.
34951-1210
CONNECTOR ACCESSORY; Manufacturer Series: 34951;
W2SC-P012
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Design: POWER AND SIGNAL; Maximum Operating Temperature: 125 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
2414-002-1886
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: STEEL;
77138-001LF
Amphenol Communications Solutions
Amphenol's 77138-001LF CONTACT features CRIMP terminals for 30-26 AWG wires. With a PHOSPHOR BRONZE build, it offers FEMALE gender and BELLOWED style for STRAIGHT mounting. Ideal for Assembly Products, this contact has an 8 finish thickness.
AT13-204-2005-SR
Amphenol
CONNECTOR ACCESSORY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1241380-1
TE Connectivity's 1241380-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 12A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055 to 0.083 inch.
1241412-1
TE Connectivity's 1241412-1 CRIMP terminal features stamped contact design, rated for 17A current with wire gauge range of 20-17 AWG. Suitable for applications requiring female contact gender and cable entry from 0.055" to 0.106", operating in temperatures from -40°C to 130°C.
1241418-4
TE Connectivity's 1241418-4 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 9 AWG and rated current of 36 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241380-3
TE Connectivity's 1241380-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 140 °C.
1241416-1
TE Connectivity's 1241416-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241380-2
TE Connectivity's 1241380-2 contact features a stamped design, copper alloy material, and crimp terminal type. With a wire gauge range of 20-17 AWG, it is ideal for applications requiring a rated current of 12A. This female contact has an operating temperature range from -40 to 150°C, making it suitable for various assembly products.
1241376-3
TE Connectivity's 1241376-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 140 °C, accommodating wire sizes from 20 to 17 AWG. With a rated current of 13 A, it finds application in Assembly Products.
1241396-1
TE Connectivity's 1241396-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 17 to 13 AWG, rated for 22A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.087" to 0.118".
1241404-1
CONNECTOR ACCESSORY; Rated Current: 24 A; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Wire Gauge (AWG): 13; Maximum Operating Temperature: 130 Cel;
1241374-1
TE Connectivity's 1241374-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241000-1
TERMINAL BLOCK ACCESSORY; Cross Section Area: .6 mm2; Maximum Wire Size: 20 AWG; Construction: STRANDED; Mounting Style: STRAIGHT; Cable Types: DISCRETE WIRE;
1241608-1
TE Connectivity's 1241608-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 7.5 A, suitable for applications requiring female contact gender and cable entry ranging from 0.067 to 0.094 inch.
1241381-3
CONNECTOR ACCESSORY; Manufacturer Series: 1241381;
1241381-1
1241416-3
CONNECTOR ACCESSORY; Rated Current: 30 A; Terminal Type: CRIMP; Maximum Operating Temperature: 140 Cel; Cross Section Area: 4 mm2; Maximum Wire Size: 11 AWG;
1241381-2
1241374-2
TE Connectivity's 1241374-2 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 14A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055 to 0.083 inch.
1241408-1
CONNECTOR ACCESSORY; Rated Current: 36 A; Maximum Wire Size: 9 AWG; Terminal Type: CRIMP; Maximum Operating Temperature: 130 Cel; Minimum Cable Entry: .132 inch;
1241412-3
TE Connectivity's 1241412-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 17A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055" to 0.106".
1241414-1
CONNECTOR ACCESSORY; Rated Current: 24 A; Maximum Operating Temperature: 130 Cel; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Contact Design: STAMPED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved