Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1241404-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 24 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
Median Price
$0.420
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Power & Signal
1+ parts
$0.241
100+ parts
-
1k+ parts
10k+ parts
$0.248
Mouser Electronics
$0.228
DigiKey
$0.304
$0.258
Newark
$0.465
Farnell
$0.508
$0.498
$0.468
Element14
$0.513
$0.389
$0.314
Powell Electronics
$0.599
$0.419
TTI
Arrow
$0.151
Master Electronics
$0.138
Verical
$0.331
Maritex
$0.134
$0.100
$0.085
$0.081
Component Electronics Inc.
$0.310
$0.230
$0.200
Q Components
Vyrian
Elcom Components
A2Z Electronics, Inc.
Electro Sonic
$0.176
VNN
ACDS - Activité Composants Distribution Service
TME
$0.181
IBS Electronics
$0.274
ABC Electronics Ltd.
Nova Conductors
Semicontronic
$0.139
$0.136
$0.135
Aztec Data Supply Inc.
$2.428
Advanced Electronics
$6.993
$6.643
GreenTree Electronics
Perfect Parts
EMSNET (Excess)
Infinite Electronics LLP (Excess)
Futuretech Components
Bastille Electronics
Continental Prestige Electronics
$0.171
Cyclops Electronics Ltd (Excess)
Kepictronics
Argo Parts USA
Crimped terminals provide a reliable and secure connection, ensuring a stable and long-lasting assembly.
Accommodates cables as small as 0.086 inch, allowing for versatile application in various setups.
Capable of operating at high temperatures up to 130°C, making it suitable for use in demanding environments.
Stamped contact design provides consistent performance and efficient conductivity for optimal functionality.
Capable of functioning in extremely low temperatures down to -40°C, ensuring reliability in diverse conditions.
Supports wire gauge up to 13 AWG, making it compatible with a wide range of wire sizes for flexibility in usage.
Offers a sufficient cross-sectional area of 2.5 mm2 for efficient transmission of electrical signals or power.
Suitable for use with wires as small as 15 AWG, providing compatibility with a variety of wire sizes for versatility.
Can accommodate larger wire sizes up to 13 AWG, ensuring adaptability to different wire diameter requirements.
Capable of handling a rated current of 24 A, making it suitable for applications requiring moderate to high current levels.
Allows for cables with a maximum entry size of 0.118 inch, supporting a wide range of cable diameters for versatility.
Features female contact gender for compatibility with corresponding male connectors, enabling secure and reliable connections.
Assembly Products 1241404-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - Mult Devs - specification chg 25/FEB/2021 Mult Devs Document Clarification 28/Sep/2021
PCN Assembly/Origin - Duplication tooling 14/NOV/2023
PCN Packaging - Change in Delivery Unit & Minimum Order Quantity 15/MAY/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Sangdest Microelectronics (Nanjing)
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
International Devices
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
Ksl Microdevices
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Rated AC Voltage: 220 V; Assembly Item Name: CONTACT; Contact Resistance: 2.5 mohm; Contact Gender: FEMALE;
1-770520-1
TE Connectivity's 1-770520-1, a CRIMP terminal with stamped contact design, supports wire gauge from 24 to 22 AWG. It operates b/w -40°C to 105°C and handles up to 11A current. Ideal for applications requiring precise crimping in tight spaces with cable entries ranging from 0.055" to 0.07".
DF1B-2428SCA
DF1B-2428SCA by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for applications requiring reliable electrical connections in various assembly products.
FMK2G-K201
Molex
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
793-5503
Wago
TERMINAL BLOCK ACCESSORY;
SPH-002T-P0.5S
J S T Mfg
SPH-002T-P0.5S by J S T Mfg is a CRIMP terminal for PH SERIES HOUSING with 2A rated current, 20 mohm contact resistance, and 0.031-0.059 inch cable entry range. It is designed for SIGNAL applications with FEMALE SQ PIN-SKT contacts made of PHOSPHOR BRONZE material.
WM-2SA
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Wire Gauge (AWG): 0;
1-329631-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; DIN Conformity: NO; Usage: BNC CONNECTOR; IEC Conformity: NO; MIL Conformity: NO;
3030174
TERMINAL BLOCK ACCESSORY; Rated Current: 24 A; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE; IEC Conformity: NO;
2832991
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Manufacturer Series: 2832991; DIN Conformity: NO; Assembly Item Name: PROTECTIVE CAP;
030-1953-000
Itt Cannon
ITT Cannon's 030-1953-000 contact features crimp terminal type, machined design, and copper alloy material. With approvals from CSA and UL, it is rated for 1000V AC voltage and 5A current. Ideal for applications requiring a female round pin-socket contact with wire sizes ranging from 24 to 20 AWG.
3595
Keystone Electronics
Assembly Items;
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
281-316
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: PLATE ITEM;
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
M23053/5-106-0
Sumitomo Electric Industries
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
13697415
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: GOLD; Maximum Cable Entry: .0945 inch;
9025770000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Assembly Item Name: FERRULE-STRAIGHT; Approvals (V): CSA; GOST; UL;
SVH-21T-P1.1
SVH-21T-P1.1 by J S T Mfg is a VH series connector with crimp terminal type, rated for 250V AC/DC and 7A current. It has approvals from CSA, TUV, and UL, with operating temperatures ranging from -25°C to 85°C. Ideal for applications requiring a female contact gender and wire sizes b/w 22-18 AWG.
0462-201-20141
TE Connectivity's 0462-201-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 20 AWG wires at 7.5 A current. Ideal for POWER applications requiring FEMALE ROUND PIN-SOCKET contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1241380-1
TE Connectivity's 1241380-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 12A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055 to 0.083 inch.
1241412-1
TE Connectivity's 1241412-1 CRIMP terminal features stamped contact design, rated for 17A current with wire gauge range of 20-17 AWG. Suitable for applications requiring female contact gender and cable entry from 0.055" to 0.106", operating in temperatures from -40°C to 130°C.
1241380-3
TE Connectivity's 1241380-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 140 °C.
1241396-1
TE Connectivity's 1241396-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 17 to 13 AWG, rated for 22A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.087" to 0.118".
1241376-3
TE Connectivity's 1241376-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 140 °C, accommodating wire sizes from 20 to 17 AWG. With a rated current of 13 A, it finds application in Assembly Products.
1241416-1
TE Connectivity's 1241416-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241380-2
TE Connectivity's 1241380-2 contact features a stamped design, copper alloy material, and crimp terminal type. With a wire gauge range of 20-17 AWG, it is ideal for applications requiring a rated current of 12A. This female contact has an operating temperature range from -40 to 150°C, making it suitable for various assembly products.
1241374-1
TE Connectivity's 1241374-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241000-1
TERMINAL BLOCK ACCESSORY; Cross Section Area: .6 mm2; Maximum Wire Size: 20 AWG; Construction: STRANDED; Mounting Style: STRAIGHT; Cable Types: DISCRETE WIRE;
1241418-4
TE Connectivity's 1241418-4 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 9 AWG and rated current of 36 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241608-1
TE Connectivity's 1241608-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 7.5 A, suitable for applications requiring female contact gender and cable entry ranging from 0.067 to 0.094 inch.
1241381-3
CONNECTOR ACCESSORY; Manufacturer Series: 1241381;
1241381-1
1241408-1
CONNECTOR ACCESSORY; Rated Current: 36 A; Maximum Wire Size: 9 AWG; Terminal Type: CRIMP; Maximum Operating Temperature: 130 Cel; Minimum Cable Entry: .132 inch;
1241978-2
TE Connectivity's 1241978-2 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40°C to 130°C.
1241416-3
CONNECTOR ACCESSORY; Rated Current: 30 A; Terminal Type: CRIMP; Maximum Operating Temperature: 140 Cel; Cross Section Area: 4 mm2; Maximum Wire Size: 11 AWG;
1241394-1
CONNECTOR ACCESSORY; Rated Current: 15 A; Minimum Cable Entry: .055 inch; Terminal Type: CRIMP; Contact Gender: FEMALE; Maximum Cable Entry: .083 inch;
1241390-1
CONNECTOR ACCESSORY; Rated Current: 22 A; Wire Gauge (AWG): 13; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Minimum Operating Temperature: -40 Cel;
1241375-1
CONNECTOR ACCESSORY; Manufacturer Series: 1241375;
1241404-3
CONNECTOR ACCESSORY; Rated Current: 26 A; Minimum Operating Temperature: -40 Cel; Cross Section Area: 2.5 mm2; Minimum Cable Entry: .086 inch; Maximum Cable Entry: .118 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved