Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1241380-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 140 °C.
Median Price
$0.162
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Boersig
1+ parts
$0.097
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.175
$0.148
$0.145
RS Americas
$0.178
$0.135
$0.119
Element14
$0.470
$0.309
$0.251
Powell Electronics
$0.536
Adafruit Industries
$7.092
$6.737
Verical
Arrow
$0.164
TTI
$0.157
Mouser Electronics
Heilind Electronics
$0.114
TTI Europe
$0.167
Master Electronics
$0.133
Avnet
DigiKey
$0.169
Interstate Connecting
$0.107
Newark
$0.161
Future Electronics
$0.136
RS (Exports)
$0.285
$0.231
Chip1Stop
$0.149
$0.125
Nova Conductors
$0.189
Maritex
$0.196
$0.105
$0.082
NAC Semi
$0.144
Electro Sonic
$0.116
Vyrian
EMSNET
Cyclops Electronics Ltd
IBS Electronics
$0.181
VNN
Elcom Components
Lakeview Electronics
Q Components
Semicontronic
$0.080
Argo Parts USA
$0.184
Continental Prestige Electronics
$0.237
$0.207
$0.171
Aztec Data Supply Inc.
$2.360
Modulus Dynamics
$4.340
Advanced Electronics
Perfect Parts
EMSNET (Excess)
Glotronic Ltd.
Assy Fe
GreenTree Electronics
Eastek
Authorized Procurement Solutions
Netroflash
$0.185
$0.180
$0.176
Robosynatics
$4.610
$4.516
Lucentia Tech
Crimp terminals provide a secure and reliable connection for the wires, ensuring good conductivity.
The small minimum cable entry size allows for compatibility with a wide range of wire sizes, making it versatile.
With a high maximum operating temperature, this product can withstand heat without compromising performance.
Stamped contact design provides a consistent and precise connection, enhancing the overall reliability of the product.
The low minimum operating temperature ensures that the product can function effectively even in extreme cold conditions.
Compatible with wire gauge 17, this product is suitable for a variety of applications requiring different wire thicknesses.
With a cross-section area of 1 mm2, this product can handle a decent amount of current flow.
Supporting wire size as small as 20 AWG ensures compatibility with thinner wires, increasing its usability.
With a maximum wire size of 17 AWG, this product can accommodate thicker wires for a wider range of applications.
With a rated current of 12 A, this product can handle moderate to high levels of electrical current without overheating.
The larger maximum cable entry size allows for flexibility in wire sizes, catering to various installation needs.
Female contact gender is commonly used for connectors, enabling easy and secure connections with male counterparts.
Assembly Products 1241380-3 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - 1241436 Drawing Adaption 16/Nov/2016 Multiple Devices Document Clarification 17/Nov/2017
PCN Assembly/Origin - Duplication production tool 04/SEP/2022
PCN Packaging - Packaging qty chg 14/MAR/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
General Diode
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Changzhou Galaxy Century Microelectronics
FDLL4148
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
DF13-2630SCF
Hirose Electric
DF13-2630SCF by Hirose Electric is a crimp terminal connector with 30-26 AWG wire size compatibility. It has a rated current of 1A and contact resistance of 30 mohm. Ideal for applications requiring female contact gender, such as DF13 series connectors in assembly products.
0460-220-1231
TE Connectivity
TE Connectivity's 0460-220-1231 crimp terminal features machined contact design, suitable for wire gauges 12-14 AWG. With a rated current of 25A and operating temperatures ranging from -55 to 125°C, it is ideal for various assembly applications.
1-66100-9
TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.
1-968855-1
TE Connectivity's 1-968855-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for power applications, it has a temperature range of -40 to 130°C and accommodates cables from 0.051" to 0.083".
500588001
Molex
Molex 500588001 is a UL approved assembly product with crimp terminal type. It has a rated current of 1.5A, contact resistance of 20 mohm, and operating temperature range from -40 to 105 °C. Primarily used for 51021 HOUSING applications due to its FEMALE contact gender and BLADE PIN-SKT design.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
1SNK900620R0000
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYCARBONATE; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0;
43030-0001
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
3200014
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel; Material: COPPER ALLOY; DIN Conformity: NO; MIL Conformity: NO;
5205980-4
TE Connectivity's 5205980-4 is a screw retainer kit for metal shell connectors. It supports wire sizes up to 0 AWG, made of carbon steel, and mounts with #4-40 screws. Ideal for assembly products in various industrial applications.
1060-16-0122
TE Connectivity's 1060-16-0122 contact features crimp terminal type, stamped design, and copper alloy material. With wire gauge of 14 AWG and rated current of 13 A, it is ideal for applications requiring male round pin-socket contacts in straight mounting style.
936012157
CONNECTOR ACCESSORY;
3-1447221-3
TE Connectivity 3-1447221-3 is a FEMALE CONTACT with CRIMP terminal type for 16-18 AWG wires. It has a rated current of 15A and operates b/w -30 to 130 °C. Ideal for POWER applications, it features STAMPED contact design and straight mounting style.
RM16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Style: ROUND PIN-SOCKET; Assembly Item Name: CONTACT; DIN Conformity: NO; Contact Gender: MALE;
7824.6925.0
A114017-SR
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: AT-SR;
AT60-16-0622
Amphenol's AT60-16-0622 CONTACT features stamped design, copper alloy material, and male gender. It supports wire sizes from 20 AWG to 18 AWG with a rated current of 13 A. Ideal for applications requiring straight mounting and round pin-socket contact style.
1011-344-0205
TE Connectivity 1011-344-0205 is a male plug assembly product with max operating temp of 125°C and min of -55°C. It features plastic material, cap item name, and supports wire size up to 0 AWG. Ideal for applications requiring stud mounting option at 0.200".
7810.6412.0
Souriau-sunbank Connection Technologies
RM16M23K by Souriau-sunbank Connection Technologies is a male contact with 3mohm resistance, designed for signal applications. It has a rated current of 13A and accepts wire sizes ranging from 20-16 AWG. Ideal for crimp terminals in assembly products.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1241380-1
TE Connectivity's 1241380-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 12A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055 to 0.083 inch.
1241412-1
TE Connectivity's 1241412-1 CRIMP terminal features stamped contact design, rated for 17A current with wire gauge range of 20-17 AWG. Suitable for applications requiring female contact gender and cable entry from 0.055" to 0.106", operating in temperatures from -40°C to 130°C.
1241396-1
TE Connectivity's 1241396-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 17 to 13 AWG, rated for 22A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.087" to 0.118".
1241404-1
CONNECTOR ACCESSORY; Rated Current: 24 A; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Wire Gauge (AWG): 13; Maximum Operating Temperature: 130 Cel;
1241376-3
TE Connectivity's 1241376-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 140 °C, accommodating wire sizes from 20 to 17 AWG. With a rated current of 13 A, it finds application in Assembly Products.
1241416-1
TE Connectivity's 1241416-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241380-2
TE Connectivity's 1241380-2 contact features a stamped design, copper alloy material, and crimp terminal type. With a wire gauge range of 20-17 AWG, it is ideal for applications requiring a rated current of 12A. This female contact has an operating temperature range from -40 to 150°C, making it suitable for various assembly products.
1241374-1
TE Connectivity's 1241374-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241000-1
TERMINAL BLOCK ACCESSORY; Cross Section Area: .6 mm2; Maximum Wire Size: 20 AWG; Construction: STRANDED; Mounting Style: STRAIGHT; Cable Types: DISCRETE WIRE;
1241418-4
TE Connectivity's 1241418-4 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 9 AWG and rated current of 36 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241608-1
TE Connectivity's 1241608-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 7.5 A, suitable for applications requiring female contact gender and cable entry ranging from 0.067 to 0.094 inch.
1241381-3
CONNECTOR ACCESSORY; Manufacturer Series: 1241381;
1241381-1
1241408-1
CONNECTOR ACCESSORY; Rated Current: 36 A; Maximum Wire Size: 9 AWG; Terminal Type: CRIMP; Maximum Operating Temperature: 130 Cel; Minimum Cable Entry: .132 inch;
1241978-2
TE Connectivity's 1241978-2 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40°C to 130°C.
1241416-3
CONNECTOR ACCESSORY; Rated Current: 30 A; Terminal Type: CRIMP; Maximum Operating Temperature: 140 Cel; Cross Section Area: 4 mm2; Maximum Wire Size: 11 AWG;
1241394-1
CONNECTOR ACCESSORY; Rated Current: 15 A; Minimum Cable Entry: .055 inch; Terminal Type: CRIMP; Contact Gender: FEMALE; Maximum Cable Entry: .083 inch;
1241390-1
CONNECTOR ACCESSORY; Rated Current: 22 A; Wire Gauge (AWG): 13; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Minimum Operating Temperature: -40 Cel;
1241375-1
CONNECTOR ACCESSORY; Manufacturer Series: 1241375;
1241388-2
CONNECTOR ACCESSORY; Rated Current: 15 A; Minimum Wire Size: 20 AWG; Contact Design: STAMPED; Minimum Cable Entry: .055 inch; Terminal Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved