Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1241394-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring 0.055-0.083 inch cable entry and operating temperatures ranging from -40 to 130°C.
Median Price
$0.137
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Boersig
1+ parts
$0.107
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.115
RS Americas
$0.104
$0.092
Newark
$0.273
$0.207
$0.174
DigiKey
$0.280
$0.200
$0.170
Powell Electronics
$0.410
Mouser Electronics
$0.160
Chip1Stop
$0.095
Master Electronics
$0.121
Verical
TTI Europe
$0.129
Nova Conductors
$0.140
TME
$0.108
Q Components
Electro Sonic
$0.154
IBS Electronics
Vyrian
Goldney Electronics S.L.
ABC Electronics Ltd.
VNN
Netroflash
Continental Prestige Electronics
$0.128
$0.116
Perfect Parts
EMSNET (Excess)
GreenTree Electronics
Abacus Technologies
Argo Parts USA
Crimp terminals provide a secure and reliable connection, ensuring stable performance.
Allows for compatibility with various cable sizes, providing flexibility in installation.
Can withstand high temperatures, making it suitable for a wide range of applications.
Stamped contact design ensures consistent performance and durability over time.
Capable of functioning even in extreme cold conditions, offering reliable operation in diverse environments.
Designed for use with 17 AWG wire, ensuring compatibility and efficient power transmission.
Provides ample space for proper electrical connection and current flow, maintaining optimal performance.
Supports use with 20 AWG wire, enabling compatibility with a wide range of wiring setups.
Can accommodate up to 17 AWG wire, ensuring versatility in wiring configurations.
With a rated current of 15 A, this product can handle moderate to high electrical loads effectively.
Allows for compatibility with larger cable sizes, enhancing adaptability in installation scenarios.
Female contact gender ensures proper mating with corresponding male connectors for secure connections.
Assembly Products 1241394-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - Mult Devs - specification chg 25/FEB/2021 Multiple Devices Loose Piece Details 20/Aug/2015
PCN Packaging - Change in Delivery Unit & MOQ 20/NOV/2023 Change in Delivery Unit & Minimum Order Quantity 15/MAY/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Semtech
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Rfe International
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
7-1452665-1
TE Connectivity's 7-1452665-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 23 to 22 AWG and rated current of 10A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40°C to 130°C.
AW4P
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: NO; Material: THERMOPLASTIC; IEC Conformity: NO; Assembly Item Name: WEDGE ITEM; Usage: AT04-4P SERIES;
PX0483
Bulgin
CONNECTOR ACCESSORY;
D20419-18
Itt Cannon
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Material: STEEL; Contact Gender: MALE; MIL Conformity: NO; Assembly Item Name: HARDWARE-MALE SCREWLOCK;
08-50-0032
Molex
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
SXH-002T-P0.6
J S T Mfg
SXH-002T-P0.6 by J S T Mfg is a CRIMP terminal with 30-26 AWG wire size range, rated for 3A current at 250V AC/DC. It has approvals from UL and features a straight mounting style, suitable for applications requiring female contact gender and low contact resistance.
964972-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel;
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
13711546
Aptiv
Aptiv 13711546 CONTACT is a FEMALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assembly due to its precise fit and durable material.
5916G6-BK
Anderson Power Products
The Anderson Power Products 5916G6-BK housing is made of polycarbonate, rated for 600V AC/DC. It can accommodate wires up to 6 AWG and operates b/w -20°C to 105°C. Approved by CSA, CUL, UL, it's ideal for electrical assembly applications.
221-503/000-004
Wago
TERMINAL BLOCK ACCESSORY;
AT60-202-16141
13711548
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CONTACT; Minimum Cable Entry: .0669 inch; Cable Types: FLRY-B; Material: COPPER ALLOY;
08-70-1039
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
RJFTVC7G
CONNECTOR ACCESSORY; Material: ALUMINIUM; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; MIL Conformity: NO; Maximum Operating Temperature: 85 Cel;
R85049/85-08W02
CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 175 Cel;
W2S-P012
TE Connectivity's W2S-P012 is a wedge item in the DT Series, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it ensures reliable performance in various assembly projects.
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
5748676-3
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
SPAL-001T-P0.5
SPAL-001T-P0.5 by J S T Mfg is a UL approved PAL connector with crimp terminal type, suitable for 26-22 AWG wires. It has a rated current of 3A and contact resistance of 25 mohm. Ideal for applications requiring male contact gender in straight mounting style at temperatures ranging from -25 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1241380-1
TE Connectivity's 1241380-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 12A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055 to 0.083 inch.
1241412-1
TE Connectivity's 1241412-1 CRIMP terminal features stamped contact design, rated for 17A current with wire gauge range of 20-17 AWG. Suitable for applications requiring female contact gender and cable entry from 0.055" to 0.106", operating in temperatures from -40°C to 130°C.
1241380-3
TE Connectivity's 1241380-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 140 °C.
1241396-1
TE Connectivity's 1241396-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 17 to 13 AWG, rated for 22A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.087" to 0.118".
1241404-1
CONNECTOR ACCESSORY; Rated Current: 24 A; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Wire Gauge (AWG): 13; Maximum Operating Temperature: 130 Cel;
1241376-3
TE Connectivity's 1241376-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 140 °C, accommodating wire sizes from 20 to 17 AWG. With a rated current of 13 A, it finds application in Assembly Products.
1241416-1
TE Connectivity's 1241416-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241380-2
TE Connectivity's 1241380-2 contact features a stamped design, copper alloy material, and crimp terminal type. With a wire gauge range of 20-17 AWG, it is ideal for applications requiring a rated current of 12A. This female contact has an operating temperature range from -40 to 150°C, making it suitable for various assembly products.
1241374-1
TE Connectivity's 1241374-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241000-1
TERMINAL BLOCK ACCESSORY; Cross Section Area: .6 mm2; Maximum Wire Size: 20 AWG; Construction: STRANDED; Mounting Style: STRAIGHT; Cable Types: DISCRETE WIRE;
1241418-4
TE Connectivity's 1241418-4 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 9 AWG and rated current of 36 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241608-1
TE Connectivity's 1241608-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 7.5 A, suitable for applications requiring female contact gender and cable entry ranging from 0.067 to 0.094 inch.
1241381-3
CONNECTOR ACCESSORY; Manufacturer Series: 1241381;
1241381-1
1241408-1
CONNECTOR ACCESSORY; Rated Current: 36 A; Maximum Wire Size: 9 AWG; Terminal Type: CRIMP; Maximum Operating Temperature: 130 Cel; Minimum Cable Entry: .132 inch;
1241978-2
TE Connectivity's 1241978-2 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40°C to 130°C.
1241416-3
CONNECTOR ACCESSORY; Rated Current: 30 A; Terminal Type: CRIMP; Maximum Operating Temperature: 140 Cel; Cross Section Area: 4 mm2; Maximum Wire Size: 11 AWG;
1241390-1
CONNECTOR ACCESSORY; Rated Current: 22 A; Wire Gauge (AWG): 13; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Minimum Operating Temperature: -40 Cel;
1241375-1
CONNECTOR ACCESSORY; Manufacturer Series: 1241375;
1241394-2
CONNECTOR ACCESSORY; Rated Current: 15 A; Cross Section Area: 1 mm2; Contact Gender: FEMALE; Contact Design: STAMPED; Terminal Type: CRIMP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved