Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1241412-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 17A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055" to 0.106".
Median Price
$0.335
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.281
Verical
$0.345
DigiKey
Nova Conductors
$0.510
Chief Enterprises
$0.540
IBS Electronics
$0.409
VNN
Electro Sonic
$0.285
Vyrian
Netroflash
$0.484
$0.474
Perfect Parts
EMSNET (Excess)
Continental Prestige Electronics
Argo Parts USA
Provides a secure connection for reliable performance.
Accommodates various cable sizes for versatile application.
Ensures durability in high temperature environments.
Delivers consistent and stable contact points for optimal conductivity.
Allows for reliable operation in low temperature conditions.
Suitable for a range of wire sizes, offering flexibility in connectivity.
Provides ample space for conducting current effectively.
Compatible with smaller wires for various wiring configurations.
Accommodates larger wires for increased current carrying capacity.
Capable of handling moderate current loads for dependable performance.
Allows for larger cable sizes to be connected, expanding versatility.
Compatible with male contacts for secure and stable connections.
Assembly Products 1241412-3 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - Mult Devs Document Clarification 28/Sep/2021
PCN Packaging - Change in Delivery Unit & Minimum Order Quantity 15/MAY/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Yangzhou Yangjie Electronics
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
350766-1
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
43030-0009
Molex
The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.
43031-0007
Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.
1-487117-1
TE Connectivity 1-487117-1 is an IDC terminal with finish thickness of 30µm. It supports FFC cables, rated for 2A current at -65 to 105°C. Ideal for signal applications, made of phosphor bronze, accommodating up to 0 AWG wire size.
DF11-2428SCFA(04)
Hirose Electric
CONNECTOR ACCESSORY;
DT06-12SC-C017
TE Connectivity's DT06-12SC-C017 is a power and signal assembly product with a rated voltage of 250V and a max operating temperature of 125°C. With a rated current of 13A, it is designed for applications requiring female contact gender and can handle up to 250V DC voltage.
1-1102771-6
160404-2
TE Connectivity's 160404-2 is a MALE contact with STRANDED construction, suitable for DISCRETE WIRE cables. With POLYAMIDE insulator and material, it supports wire sizes from 12 to 10 AWG and operates up to 105°C. Ideal for applications requiring a 0.15-0.25 inch cable entry.
08-70-0043
Molex 08-70-0043 is a CRIMP male CONTACT with STRAIGHT mounting style. Features RND PIN-SKT contact style made of BRASS. Ideal for assembly products requiring reliable electrical connections in various applications.
08-55-0102
Molex 08-55-0102 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for FEMALE contacts in STRAIGHT mounting applications.
5-965906-1
TE Connectivity's 5-965906-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 7.5 A. Ideal for applications requiring a female contact gender, it operates b/w -40 to 120 °C temperature range.
605348
CONNECTOR ACCESSORY; Contact Gender: MALE;
13711542
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Material: COPPER ALLOY; Maximum Cable Entry: .063 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .0472 inch;
1061200000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; Approvals (V): UL; Material: GLASS FILLED PA66; MIL Conformity: NO; Maximum Operating Temperature: 120 Cel; Assembly Item Name: END BRACKET;
2-2198617-5
TE Connectivity 2-2198617-5 is a BACKSHELL with 3 shell sizes and shielding. It supports up to 0 AWG wire size, made of ABS material, and mounts with #4-40 screws. Ideal for applications requiring secure cable assembly in various industries.
45750-1112
45750-1112 by Molex is a crimp contact with copper alloy material. It supports wire sizes from 20 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications with 5557, 30067, 43760, 44516, and 42474 series housings.
3200014
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel; Material: COPPER ALLOY; DIN Conformity: NO; MIL Conformity: NO;
15-04-5104
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
39-00-0047
Molex 39-00-0047 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 28 AWG to 22 AWG such as 5557, 30067, and more. Offers a 0.035-0.071 inch cable entry range for versatile use in various assemblies.
206966-9
TE Connectivity 206966-9 is an Assembly Product with 13 shell sizes. It supports up to 0 AWG wire size and features a STRAIGHT mounting style. Made of POLYETHYLENE, it offers SCREW mounting options and is ideal for applications requiring 3/4-20 UNEF-2B compatibility.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1241380-1
TE Connectivity's 1241380-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 12A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.055 to 0.083 inch.
1241412-1
TE Connectivity's 1241412-1 CRIMP terminal features stamped contact design, rated for 17A current with wire gauge range of 20-17 AWG. Suitable for applications requiring female contact gender and cable entry from 0.055" to 0.106", operating in temperatures from -40°C to 130°C.
1241380-3
TE Connectivity's 1241380-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 140 °C.
1241396-1
TE Connectivity's 1241396-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 17 to 13 AWG, rated for 22A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.087" to 0.118".
1241404-1
CONNECTOR ACCESSORY; Rated Current: 24 A; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Wire Gauge (AWG): 13; Maximum Operating Temperature: 130 Cel;
1241376-3
TE Connectivity's 1241376-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 140 °C, accommodating wire sizes from 20 to 17 AWG. With a rated current of 13 A, it finds application in Assembly Products.
1241416-1
TE Connectivity's 1241416-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241380-2
TE Connectivity's 1241380-2 contact features a stamped design, copper alloy material, and crimp terminal type. With a wire gauge range of 20-17 AWG, it is ideal for applications requiring a rated current of 12A. This female contact has an operating temperature range from -40 to 150°C, making it suitable for various assembly products.
1241374-1
TE Connectivity's 1241374-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG and rated current of 12A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241000-1
TERMINAL BLOCK ACCESSORY; Cross Section Area: .6 mm2; Maximum Wire Size: 20 AWG; Construction: STRANDED; Mounting Style: STRAIGHT; Cable Types: DISCRETE WIRE;
1241418-4
TE Connectivity's 1241418-4 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 9 AWG and rated current of 36 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1241608-1
TE Connectivity's 1241608-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 7.5 A, suitable for applications requiring female contact gender and cable entry ranging from 0.067 to 0.094 inch.
1241381-3
CONNECTOR ACCESSORY; Manufacturer Series: 1241381;
1241381-1
1241408-1
CONNECTOR ACCESSORY; Rated Current: 36 A; Maximum Wire Size: 9 AWG; Terminal Type: CRIMP; Maximum Operating Temperature: 130 Cel; Minimum Cable Entry: .132 inch;
1241978-2
TE Connectivity's 1241978-2 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 11 AWG and rated current of 30 A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40°C to 130°C.
1241416-3
CONNECTOR ACCESSORY; Rated Current: 30 A; Terminal Type: CRIMP; Maximum Operating Temperature: 140 Cel; Cross Section Area: 4 mm2; Maximum Wire Size: 11 AWG;
1241394-1
CONNECTOR ACCESSORY; Rated Current: 15 A; Minimum Cable Entry: .055 inch; Terminal Type: CRIMP; Contact Gender: FEMALE; Maximum Cable Entry: .083 inch;
1241390-1
CONNECTOR ACCESSORY; Rated Current: 22 A; Wire Gauge (AWG): 13; Terminal Type: CRIMP; Maximum Wire Size: 13 AWG; Minimum Operating Temperature: -40 Cel;
1241375-1
CONNECTOR ACCESSORY; Manufacturer Series: 1241375;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved