Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1-6609037-4 is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 40°C. With dimensions of L93.73XB57.66XH45.72 (mm), it is panel mountable and suitable for applications requiring a rated current of 15A.
Median Price
$41.520
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS Americas
1+ parts
$24.040
100+ parts
-
1k+ parts
10k+ parts
TTI
$26.670
$25.400
Sager
$32.500
Future Electronics
$34.800
$33.140
Mouser Electronics
Element14
$44.963
$40.470
$39.313
Heilind Electronics
$48.200
$37.656
Interstate Connecting
Master Electronics
$55.410
$42.330
$42.120
DigiKey
$55.550
$43.495
TE Connectivity
$94.070
Verical
$39.415
Arrow
$31.623
Nova Conductors
$35.831
Electro Sonic
$42.500
$33.730
$32.470
IBS Electronics
$50.420
$48.428
$47.475
Vyrian
VNN
NAC Semi
$53.540
Continental Prestige Electronics
$35.114
Argo Parts USA
Authorized Procurement Solutions
Netroflash
$34.040
$33.323
Perfect Parts
Assy Fe
High insulation resistance ensures safe and reliable operation, making this EMI Mains Filter a secure choice for electrical applications.
This filter has earned certifications from prestigious organizations such as UL, CSA, and VDE, guaranteeing its quality and compliance with industry standards.
With a rated voltage of 250V, this EMI Mains Filter is suitable for various voltage applications, providing versatile protection against electromagnetic interference.
Designed as a single-phase EMI filter, this product effectively minimizes electromagnetic interference in power systems, ensuring stable and interference-free operation.
With a maximum operating temperature of 40°C, this EMI Mains Filter can withstand high-temperature environments, offering long-lasting and reliable performance.
Even in extreme cold conditions, this filter is capable of operating efficiently with its minimum operating temperature of -10°C.
Compact in size, this filter's width of 57.66mm allows for easy installation and integration into electrical systems with space limitations.
Designed to operate at both 50Hz and 60Hz, this filter can effectively suppress electromagnetic interference across a wide range of frequencies, making it suitable for various applications.
With a length of 93.73mm, this filter can accommodate and support the necessary components for efficient EMI filtering, ensuring optimal performance.
This EMI Mains Filter has been tested to withstand a high potential (high pot) of 2250V, providing excellent insulation and safety measures in electrical systems.
With a maximum leakage current of only 0.21mA, this filter ensures minimal electrical leakage, enhancing safety and reducing power loss.
Featuring a panel mount design, this filter can be easily installed and securely attached to panels or other surfaces, simplifying the integration process.
These compact dimensions allow for seamless installation in tight spaces, providing convenience and flexibility during setup.
With a high-rated current of 15A, this EMI Mains Filter can effectively handle heavy loads, making it suitable for a wide range of applications.
The filter's height of 45.72mm ensures a compact form factor while still providing sufficient space for optimal filtering and electrical performance.
EMI Mains Filters 1-6609037-4 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Approvals (V):
Filter Type:
Height:
High Pot:
Minimum Insulation Resistance:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
261
Deltrol Controls
Other Relays;
FMAD-0932-2510
Schurter Ag
Schurter Ag's FMAD-0932-2510 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a 480V rated voltage. It operates at -25 to 100°C, has a 25A rated current, and offers high pot protection up to 3000V. Ideal for three-phase applications requiring effective filtering in industrial settings.
SCF31B-180-S1R7A013J
KEMET Corporation
KEMET Corporation's SCF31B-180-S1R7A013J is a UL approved EMI mains filter with 500V rated voltage and 18A current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for three-phase applications, this filter is mounted through hole and measures 32mm x 46.5mm x 44mm in dimensions.
SSHB21HS-15064
KEMET Corporation's SSHB21HS-15064 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25°C to 130°C. It is UL approved and designed for single-phase applications requiring a rated current of 1.5A.
20EQ1
TE Connectivity's 20EQ1 is a single-phase EMI filter with a rated voltage of 250V. It offers insertion loss of 6dB at min frequency and 10dB at max frequency. This panel mount filter, approved by UL, CSA, and VDE, is suitable for applications requiring high pot voltage up to 2250V and a rated current of 20A.
5500.2658.03
Schurter Ag's 5500.2658.03 EMI Mains Filter is a single-phase filter with 250V rated voltage and 60A rated current. It offers approvals from ENEC-10, UL, VDE for applications requiring high insulation resistance (1 Mohm) and low leakage current (1 mA). Ideal for chassis mounting in environments with temperatures ranging from -40°C to 100°C at frequencies of 50-60Hz.
30AYP6C
Corcom
THREE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; Dimensions: L224XB141.5XH65 (mm)/L8.82XB5.57XH2.56 (inch); Approvals (V): UL; CSA; VDE; Rated Voltage: 250 V;
810912010112
Wuerth Elektronik & Kg
810912010112 by Wurth Elektronik is a SINGLE PHASE EMI FILTER with a rated voltage of 250V and rated current of 10A. It has approvals from CSA, ENEC-10, IEC, UL, VDE and operates at temperatures ranging from -25°C to 100°C. Ideal for PANEL MOUNT applications requiring effective EMI mains filtering in various electronic systems.
TF2514HU-101Y7R0-01
TDK
TDK TF2514HU-101Y7R0-01 is a 280V UL/CSA/IEC approved EMI mains filter with 7A rated current. Featuring single-phase filter type, it operates b/w -20°C to 120°C. Ideal for through-hole mounting applications due to its compact D25xH14mm dimensions.
NAH-40-103-F
Cosel
The Cosel NAH-40-103-F is a single-phase EMI filter with 500V rated voltage and 40A rated current. With approvals from UL, CSA, ENEC-15, and DEMKO, it operates at temperatures ranging from -40°C to 85°C. Ideal for DIN rail mounting applications requiring high pot of 4000V and max leakage current of 1mA.
P3215-AL
Coilcraft
Coilcraft's P3215-AL EMI Mains Filter is a single-phase filter with 4 terminals. It has UL approval and can handle up to 3.2A current. With dimensions of L31.8xB15.88xH31.2 mm, it is ideal for applications requiring EMI filtering in electronic devices operating b/w -40°C to 85°C temperature range.
SS30V-400021
SS30V-400021 by KEMET Corp is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage, 4A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C and is ideal for EMI mains filtering applications due to its high pot of 500V.
7448012002
Wurth Elektronik's 7448012002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 2A rated current. It operates b/w -40 to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring EMI mains filtering at 50Hz frequency.
FN405-0.5-02
Schaffner Holding Ag
FN405-0.5-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 0.6A rated current. It operates at temperatures from -25 to 100°C, has 5 terminals, and a max leakage current of 0.373mA. This single-phase filter is ideal for applications requiring through-hole mounting in systems with high operating frequencies of 50/60Hz.
RSEL-2003WL
The TDK RSEL-2003WL is a single-phase EMI filter with 250V rated voltage and 3A rated current. It offers high insulation resistance of 100 Mohm, approvals from CSA, ENEC-14, and UL. Ideal for panel mounting applications in environments ranging from -25°C to 85°C.
SC-06-10JS
KEMET Corporation's SC-06-10JS is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 105°C, and measures 26mm x 29mm x 12mm. Ideal for EMI mains filtering applications with through hole mounting.
20EMC1
TE Connectivity's 20EMC1 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -10°C to 40°C, with max leakage current of 0.73mA. Ideal for PANEL MOUNT applications in EMI suppression at 50Hz frequency.
6VV1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Minimum Frequency: 15 dB; Maximum Leakage Current: .5 mA;
744834407
Wurth Elektronik 744834407 is a single-phase EMI filter with 4 terminals, rated for 250V and 3.5A current. Operating temperature ranges from -40°C to 125°C, suitable for applications requiring noise suppression in mains power systems at frequencies up to 50Hz. Dimensions are L32.5xB28.0xH22.0mm, ideal for through-hole mounting setups.
FN355-10-05
Schaffner Holding Ag's FN355-10-05 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, UL, CSA, SEMKO approvals. It operates at -25 to 100 °C and has a high pot of 1900V. With dimensions of L65.0XB50.0XH40.3 (mm), it is ideal for PANEL MOUNT applications in systems requiring up to 11.5A current handling capacity at 400Hz frequency.
SSR21NV-M12345
SSR21NV-M12345 by KEMET Corp is a single-phase EMI filter with a rated voltage of 250V. It has a min insulation resistance of 100 Mohm and can operate at temperatures ranging from -25 to 120 °C. This filter is commonly used in applications requiring EMI mains filtering, such as industrial equipment or power supplies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-6609036-6
SINGLE PHASE EMI FILTER; Rated Current: 40 A; Minimum Operating Temperature: -10 Cel; Mounting Type: PANEL MOUNT; Maximum Leakage Current: .75 mA; Rated Voltage: 250 V;
1-6609028-9
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Minimum Frequency: .15 MHz; Insertion Loss At Minimum Frequency: 6 dB; Operating Frequency (Hz): 50/60Hz;
1-6609032-3
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .4 mA; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL; Dimensions: L97.8XB52.6XH38.9 (mm)/L3.85XB2.071XH1.531 (inch);
1-6609046-0
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 15 A; Rated Voltage: 250 V; High Pot: 2250 V; Additional Features: STUD TERMINAL;
1-6609035-0
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Minimum Frequency: .01 MHz; Width (mm): 57.2;
1-6609035-1
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 10 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -10 Cel; Maximum Leakage Current: .21 mA;
1-6609035-2
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 10 A; Maximum Operating Temperature: 40 Cel; Rated Voltage: 250 V; Dimensions: L110.0XB57.2XH45.2 (mm)/L4.331XB2.252XH1.78 (inch);
1-6609035-3
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Mounting Type: PANEL MOUNT; Rated Voltage: 250 V; Insertion Loss At Minimum Frequency: 7 dB;
1-6609037-0
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 20 A; Minimum Operating Temperature: -10 Cel; Maximum Leakage Current: .21 mA; Width (mm): 57.2;
1-6609005-4
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Maximum Leakage Current: .38 mA; Dimensions: L55.88XB27.94XH20.57 (mm)/L2.2XB1.1XH0.81 (inch); High Pot: 2250 V; Approvals (V): UL; CSA; VDE;
1-6609021-0
SINGLE PHASE EMI FILTER; Rated Current: 10 A; High Pot: 2250 V; Maximum Leakage Current: .4 mA; Maximum Operating Temperature: 40 Cel; Operating Frequency (Hz): 50/60Hz;
1-6609021-2
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): UL; CSA; VDE; Maximum Operating Temperature: 40 Cel; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -10 Cel;
1-6609027-4
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): UL; CSA; VDE; Width (mm): 52.58; Rated Voltage: 250 V; Minimum Operating Temperature: -10 Cel;
1-6609027-5
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Maximum Operating Temperature: 40 Cel; Operating Frequency (Hz): 50/60Hz; Rated Voltage: 250 V; Width (mm): 57.15;
1-6609027-6
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -10 Cel;
1-6609037-3
SINGLE PHASE EMI FILTER; Rated Current: 10 A; High Pot: 2250 V; Maximum Leakage Current: .21 mA; Height: 38.86 mm; Maximum Operating Temperature: 40 Cel;
1-6609020-0
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Width (mm): 33.53; Height: 29.46 mm; Mounting Type: PANEL MOUNT; Approvals (V): UL; CSA; VDE;
1-6609035-4
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; Maximum Operating Temperature: 40 Cel; Dimensions: L125.0XB101.6XH69.85 (mm)/L4.921XB4.0XH2.75 (inch); Height: 69.85 mm;
1-6609035-5
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; Additional Features: STUD TERMINAL; GROUND CHOKE; Rated Voltage: 250 V; Maximum Leakage Current: .21 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved