Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B82789C0104N001 is a 2-function data line filter with inductance of 100uH and rated voltage of 80V. With gold over nickel terminals, it operates b/w -55°C to 125°C. Ideal for applications requiring a max DC resistance of 1.5 ohm and output impedance of 50 ohm, this surface mount filter comes in dimensions L4.5xB3.2xH3.0mm, suitable for tape and reel packing method.
Median Price
$1.860
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.259
1k+ parts
$1.036
10k+ parts
$0.935
LIBRA Elektronik GmbH
-
VNN
Vyrian
Nova Conductors
Corohmni
$1.196
Aztec Data Supply Inc.
$2.090
Ampacity Inc.
$2.400
AZTECH Wire
$15.930
$15.300
$14.990
$14.690
RC Electronics
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Having 2 functions allows for more comprehensive filtering, making this product a good choice for improved signal quality.
With a high rated voltage, this product is suitable for use in a variety of applications, increasing its versatility.
With 4 terminals, this filter offers easy connectivity options, making it a convenient choice for installation.
A data line filter ensures efficient filtering of unwanted noise, making this product ideal for data transmission applications.
With a high maximum operating temperature, this filter can withstand harsher environments, enhancing its durability.
The low minimum operating temperature allows this filter to be used in a wide range of environments, ensuring reliability.
Gold over nickel terminals provide superior conductivity and corrosion resistance, making this filter a reliable choice for long-term use.
With an inductance of 100uH, this filter effectively suppresses noise, ensuring clean signals and improved performance.
The compact width of 3.2mm makes this filter easy to integrate into various electronic devices, offering versatility in design.
Low DC resistance ensures minimal signal loss, making this filter a high-performance choice for maintaining signal integrity.
The short length of 4.5mm allows for space-saving installation, making this filter suitable for compact designs.
With an output impedance of 50 ohms, this filter is optimized for data transmission, ensuring efficient signal transfer.
Packaged in tape and reel, this filter is easy to handle and transport, making it convenient for mass production.
Designed for surface mounting, this filter enables quick and secure installation, suitable for automated assembly processes.
The compact dimensions of this filter make it versatile for various electronic applications, offering flexibility in design.
With a rated current of 0.15A, this filter is suitable for low-power applications, providing efficient filtering without power wastage.
The low height profile of 3mm allows for easy integration and space-saving installation, making this filter suitable for compact devices.
Data Line Filters B82789C0104N001 attributes and parameters. Explore more Data Line Filters devices from TDK
Additional Features:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
B82789C0104N001 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Rectron
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Temic Semiconductors
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
742792624
Wuerth Elektronik & Kg
The Wurth Elektronik & Kg 742792624 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter has dimensions of L1.6XB0.8XH0.8 (mm) and is suitable for applications requiring a rated current of 1.5 A and an output impedance of 180 ohm.
ACP3225-102-2P
TDK
DATA LINE FILTER;
NFM18PC225B1A3D
Murata Manufacturing's NFM18PC225B1A3D is a FEED THROUGH CAPACITOR with 200 Mohm Min Insulation Resistance, 10 V Rated Voltage, and 2200000 uF Capacitance. It operates b/w -40 to 85 °C and is ideal for data line filtering applications due to its compact size (L1.6XB0.8XH0.8 mm) and high rated current of 4 A.
BKP1005HS121-T
Taiyo Yuden
BKP1005HS121-T by Taiyo Yuden is a 0402 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.14 ohm, and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
74279218
Wurth Elektronik 74279218 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 90 MHz, suitable for data line filtering applications in surface mount configurations.
BLM21BB471SN1D
Murata Manufacturing's BLM21BB471SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.4 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This ferrite chip filter has dimensions of L2.0xB1.25xH0.85 mm and is designed for surface mount installation in various electronic devices.
742792693
Wurth Elektronik 742792693 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 2200 ohm at frequencies ranging from 100 MHz to 110 MHz.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
742792023
Wurth Elektronik 742792023 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a width of 1.2mm, length of 2mm, and height of 0.9mm. With an output impedance of 120 ohm, it operates b/w -55 to 125 °C and supports frequencies from 100 MHz to 250 MHz.
MMZ2012Y600BT000
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Material: Ferrite; Rated Current: 1 A; Terminal Finish: TIN NICKEL COPPER;
P0473NL
Pulse Electronics
Pulse Electronics P0473NL is a data line filter with 2 functions, AEC-Q200 screening level. It offers inductance of 880uH, max operating temp of 120°C, and rated current of 1.63A. Ideal for applications requiring surface mount filters with dimensions L12.7xB12.7xH5.46mm such as automotive electronics.
BLM18PG121SH1D
BLM18PG121SH1D by Murata is a chip bead data line filter with AEC-Q200 screening. It has 2 terminals, operates b/w -55 to 125 °C, and offers 120 OHM output impedance. Ideal for surface mount applications in automotive electronics due to its ferrite construction and compact dimensions of L1.6xB0.8xH0.8 mm.
DLW21SN900HQ2L
DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.
ACM7060-701-2PL-TL
ACM7060-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 0.015 ohm. Ideal for applications requiring noise suppression in data lines.
BLM31PG601SN1L
BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.
MMZ2012Y202B
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
BLM21AG102SN1D
Murata Manufacturing's BLM21AG102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C, offering 0.28 ohm DC resistance and 1000 OHM output impedance at 100 MHz. Ideal for data line filtering applications, it measures L2.0XB1.25XH0.85 mm and has a rated current of 0.5 A.
FBMH3225HM601NTV
Taiyo Yuden's FBMH3225HM601NTV is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40 to 125°C, has dimensions of L3.2xB2.5xH2.5 mm, and is ideal for surface mount applications in electronic devices requiring noise suppression.
7448262013
Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.
BLM15AG100SN1D
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82790S0513N201
TDK B82790S0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Operating b/w -40°C to 125°C, it has a max DC resistance of 0.14 ohm. Ideal for applications requiring noise suppression in data lines, it comes in surface mount packaging with dimensions of L7.1xB6.0xH4.9mm.
B82789C0513N002
The TDK B82789C0513N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 51uH. It operates b/w -55°C to 125°C and has a max DC resistance of 0.55 ohm. Ideal for applications requiring noise suppression in electronic circuits.
B82789C0104N002
TDK B82789C0104N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 100uH. It operates b/w -55°C to 125°C, has matte tin over nickel finish, and dimensions of L4.5xB3.2xH3.0mm. Ideal for applications requiring filtering in data lines with a max current rating of 0.15A.
B82790-S513-N201
TDK B82790-S513-N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Ideal for applications requiring a compact surface-mount solution, it offers low DC resistance of 0.14 ohm and output impedance of 50 ohm.
B82790C0513N201
TDK B82790C0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. It has 4 terminals, matte tin over nickel finish, and 0.14 ohm max DC resistance. Ideal for applications requiring a compact surface mount filter with 50 ohm output impedance.
B82787C0513H002
TDK B82787C0513H002 is a 2-function data line filter with 51uH inductance and 10 Mohm insulation resistance. Rated for 50V, it operates b/w -40 to 150°C, ideal for applications requiring noise suppression in data lines.
B82789C0513H002
TDK B82789C0513H002 is an 80V data line filter with 51uH inductance and 0.55 ohm max DC resistance. It has 2 functions, 4 terminals, and operates b/w -55 to 150°C. Ideal for applications requiring a compact surface mount filter with a rated current of 0.25A.
B82790C0113N201
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: .5 A; Rated Voltage: 80 V; No. of Terminals: 4; Width (mm): 6.0;
B82790C0105N240
The TDK B82790C0105N240 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 1000uH. It has UL and IEC approvals, suitable for applications requiring filtering of data lines. With dimensions of L7.1xB6.0xH4.9 (mm), it is designed for surface mount installation with a max DC resistance of 0.17 ohm and rated current of 0.5A.
B82789C0113N002
TDK B82789C0113N002 is a 2-function data line filter with inductance of 11uH and rated current of 0.3A. It operates b/w -55 to 125°C, has a max DC resistance of 0.25 ohm, and output impedance of 50 ohm. Suitable for surface mount applications, it provides effective filtering for data lines in various electronic devices.
B82790-C105-N240
DATA LINE FILTER; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Inductance: 1000 uH; Height: 4.9 mm; Packing Method: TAPE AND REEL;
B82789C0104H002
TDK B82789C0104H002 is an 80V data line filter with 100uH inductance and 1.5 ohm max DC resistance. Ideal for IEC-approved applications, it has 2 functions and operates b/w -55°C to 150°C.
B82790C0474N215
DATA LINE FILTER; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Inductance: 470 uH; Output Impedance (ohm): 50 OHM; Rated Voltage: 80 V;
B82790S0253N201
DATA LINE FILTER; Maximum DC Resistance: .11 ohm; Rated Current: .5 A; JESD-609 Code: e3; Length: 7.1 mm; No. of Terminals: 4;
B82790-C113-N201
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: .5 A; Height: 4.9 mm; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); Inductance: 11 uH;
B82790C0502N201
DATA LINE FILTER; Maximum DC Resistance: .06 ohm; Rated Current: 1 A; Terminal Finish: MATTE TIN OVER NICKEL; Approvals (V): UL; IEC; Rated Voltage: 80 V;
B82790-C474-N215
DATA LINE FILTER; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); No. of Terminals: 4; Approvals (V): UL; IEC;
B82789C0513H001
DATA LINE FILTER; Maximum DC Resistance: .55 ohm; Rated Current: .25 A; Height: 3 mm; Rated Voltage: 80 V; No. of Terminals: 4;
B82790C0475N265
B82790C0475N265 by TDK is a data line filter with a rated voltage of 80V and inductance of 4700uH. It has 2 functions and is approved by UL and IEC. This filter is suitable for surface mount applications requiring a max DC resistance of 0.51 ohm.
B82799S0513N001
B82799S0513N001 by TDK is a data line filter with a rated voltage of 80V and inductance of 51uH. It has 4 terminals and is approved by UL. This filter is commonly used for noise suppression in electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved