Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics VN920SP13TR is a MOS technology peripheral driver with 10 terminals. It offers built-in protections for transient, over current, and over voltage. With a max output current of 30A, it is ideal for applications requiring sink flow direction such as buffer or inverter based interface ICs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Anansix
Nova Conductors
Corohmni
$5.429
AZTECH Wire
$8.185
Aztec Data Supply Inc.
$10.810
IDEA Electronic Components Group
$10.913
$9.822
Advanced Electronics
$13.273
$12.609
Semicontronic
$13.500
$13.162
$13.095
MKK Technologies
$20.521
DigiPath Technology Company
Ampacity Inc.
$25.500
Microchip USA
$33.355
Kepictronics
Perfect Parts
Lixinc
A-Z Elektronik GmbH
Continental Prestige Electronics
Corphita
Argo Parts USA
Bastille Electronics
Parana Technologies
$13.048
The use of plastic/epoxy material ensures durability and resistance to damage, making this product a reliable choice for long-term use.
Being surface mountable makes installation easier and more convenient, especially in compact or crowded spaces.
With a high maximum supply voltage, this peripheral driver can handle a wide range of power inputs, making it versatile for various applications.
The built-in protections offer a safety net for the connected devices, preventing damage from power fluctuations and ensuring reliable operation.
The flexible power supply options allow for compatibility with different systems and power sources, increasing the product's versatility.
Having a sufficient number of terminals facilitates easy connection to other devices or components, improving overall functionality.
The high maximum output current capacity enables the peripheral driver to support devices with higher power requirements, increasing its utility.
The MOS technology used in this product offers efficient performance and low power consumption, making it suitable for energy-efficient applications.
The nominal supply voltage provides a stable power source for connected devices, ensuring consistent and reliable operation.
The ability to sink output current makes this peripheral driver suitable for applications where current needs to be drawn away from connected devices.
Peripheral Drivers VN920SP13TR attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
VN920SP13TR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Unitrode
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148WS
Fairchild Semiconductor
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Diotec Semiconductor Ag
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Crimson Semiconductor
VN800PSTR-E
STMicroelectronics
STMicroelectronics' VN800PSTR-E is a peripheral driver with 8-36V power supplies, 0.7A max output current, and built-in protections. Ideal for automotive applications due to AEC-Q100 screening level and sink output current flow direction. Package style: small outline, terminal pitch: 1.27mm, and moisture sensitivity level of 3.
FPF2702MPX
FPF2702MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8-36V, built-in protections for over current, thermal, and under voltage. It features 8 terminals in a small outline package suitable for industrial applications requiring source output current flow direction.
NCP45520IMNTWG-L
NCP45520IMNTWG-L by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage conditions. It has a small outline package style with very thin profile suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.
VNH7100AS-E
HALF BRIDGE BASED PERIPHERAL DRIVER;
ISO8200BQTR
ISO8200BQTR by STMicroelectronics is a peripheral driver with 32 terminals, operating voltage range of 2.75V to 36V, and built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max output current of 1.3A and is suitable for automotive applications requiring buffer or inverter based peripheral drivers with standard input characteristics.
UDN2987LWTR-6
Allegro MicroSystems' UDN2987LWTR-6 is a bipolar technology peripheral driver with 8 bits. It has a max output current of 0.35 A and operates b/w -20 to 85°C. Ideal for applications requiring small outline surface mount packages.
IRS44262SPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2003AD16-U
Diodes Incorporated's ULN2003AD16-U is a 7-bit buffer/inverter-based peripheral driver with open-collector output. It operates b/w -40°C to 105°C, handles up to 13V supply voltage, and has built-in transient protection. Ideal for applications requiring sink current flow direction in compact designs.
L298N
L298N by STMicroelectronics is a full bridge based peripheral driver with 2 functions and over current protection. It operates at a nominal voltage of 5V to 42V, with output polarity as true and source/sink current flow direction. This rectangular package is commonly used in applications requiring high power motor control.
UCC23513DWY
UCC23513DWY by Texas Instruments is a small outline peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle up to 33V supply voltage, providing a max output current of 4.5A. Ideal for applications requiring source and sink current flow direction control, such as buffer or inverter-based systems.
E-L293DD013TR
E-L293DD013TR by STMicroelectronics is a peripheral driver with 2 functions, operating at 4.5-36V. It offers thermal protection and source/sink current flow direction. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
SN754410NE
SN754410NE by Texas Instruments is a 16-terminal peripheral driver with built-in transient and thermal protections. It operates b/w -40 to 85°C, supports a max output current of 1A, and has a turn-on time of 0.4us. Ideal for industrial applications requiring true output polarity control in a compact package style.
DRV8844PWPR
DRV8844PWPR by Texas Instruments is a peripheral driver with a max supply voltage of 60V, output current up to 2.5A, and built-in protections for overcurrent and thermal issues. It is ideal for industrial applications requiring precise motor control in harsh environments.
IRS21844MTRPBF
International Rectifier Hirel Products
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HQCCN; Package Shape: SQUARE;
IRS2106STRPBF
Infineon Technologies
IRS2106STRPBF by Infineon is a peripheral driver with 8 terminals, operating voltage of 10-20V. It offers built-in transient and under voltage protections, ideal for automotive applications. With a turn-on time of 0.3us and turn-off time of 0.28us, it provides source and sink output current flow direction.
ULN2004A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Turn-on Time: 1 us;
VNS3NV04D-E
VNS3NV04D-E by STMicroelectronics is a peripheral driver with 2 functions, 8 terminals, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 13V to 30V and has a nominal output peak current limit of 5A. This small outline package driver is ideal for applications requiring source and sink output current flow direction.
VN7004CHTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
BSP752TXUMA1
BSP752TXUMA1 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 6-52 V. This MOS technology-based driver has a nominal output peak current limit of 1.7 A and is ideal for industrial applications requiring sink output flow direction.
ISO1H812GXT
Infineon's ISO1H812GXT is a 36-terminal peripheral driver with a 2.2A output peak current limit in a small outline package. It features a half-bridge interface IC and sink output current flow direction, making it ideal for various applications requiring precise control of peripherals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN920B5TR-E
STMicroelectronics VN920B5TR-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. Ideal for applications requiring source flow direction, it comes in a small outline package suitable for surface mount assembly.
VN920B5-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Maximum Output Current: 10 A;
VN920SPTR-E
STMicroelectronics' VN920SPTR-E is a peripheral driver with 36V max supply voltage, 30A max output current, and built-in protections. Ideal for applications requiring transient, over current, over voltage protection. Package style: small outline, heat sink/slug; interface IC type: buffer or inverter based peripheral driver.
VN920SP-E
VN920SP-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and a max output current of 30A. It is used as a buffer or inverter based peripheral driver, providing protection against transient, over current, over voltage, thermal, and under voltage conditions.
VN920DB5TR-E
STMicroelectronics' VN920DB5TR-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. It is used for buffer or inverter-based applications requiring transient, over current, over voltage, thermal, under voltage protection. The small outline package style makes it suitable for compact designs with limited space constraints.
VN920SO-E
STMicroelectronics' VN920SO-E is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates on power supplies ranging from 8V to 36V and has a max output current of 10A. Ideal for applications requiring buffer or inverter-based interface ICs with a source flow direction.
VN920SO
STMicroelectronics' VN920SO is a MOS technology-based peripheral driver with 16 terminals. It offers built-in protections for transient, over current, and over voltage scenarios. With a max output current of 10A and nominal output peak current limit of 45A, it's ideal for applications requiring sink flow direction like buffer or inverter based interface ICs.
VN920-B5
STMicroelectronics' VN920-B5 is a MOS technology-based peripheral driver with 4 terminals and built-in protections. It operates at supply voltages ranging from 5.5V to 36V, providing a max output current of 10A for applications requiring sink flow direction control. The small outline package with heat sink/slug makes it suitable for various automotive and industrial uses.
VN920-B5H13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Terminal Pitch: 1.7 mm; JESD-30 Code: R-PSSO-G4;
VN920-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
VN920SP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
VN920
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; No. of Functions: 1;
VN920D-B5
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 3;
VN920D-B513TR
STMicroelectronics' VN920D-B513TR is a MOS technology-based peripheral driver with 4 terminals and a max output current of 10A. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. Ideal for applications requiring a sink-type buffer or inverter interface IC with a nominal voltage of 13V and peak current limit of 45A.
VN920-B513TR
VN920-B513TR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and a max output current of 10A. It is commonly used as a buffer or inverter based peripheral driver for applications requiring transient, over current, over voltage, thermal, and under voltage protections.
VN920DSP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
VN920DSP13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 13 V;
VN920DSPTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Driver No. of Bits: 1;
VN920(012Y)
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE; Minimum Supply Voltage: 5.5 V; Qualification: Not Qualified; Maximum Supply Voltage: 36 V; Nominal Supply Voltage: 13 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved