Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VN820PT13TR-E by STMicroelectronics is a versatile peripheral driver with a max supply voltage of 36V and can handle output currents up to 9A. It features built-in protections against transient, over/under voltage, and thermal issues. Ideal for automotive and industrial applications, it ensures reliable performance in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
IDEA Electronic Components Group
$6.074
$5.466
MKK Technologies
$11.421
DigiPath Technology Company
Corphita
Parana Technologies
$7.262
The use of plastic/epoxy ensures durability and resistance to environmental factors, making this peripheral driver reliable in various applications.
Surface mount technology allows for compact design and efficient utilization of board space, beneficial for modern electronic applications.
A high maximum supply voltage enhances versatility, allowing the driver to operate in a wider range of applications without risk of damage.
The rectangular package shape contributes to a standardized footprint, facilitating easy integration onto PCB layouts.
Comprehensive built-in protections enhance the overall safety and reliability of the device in various operating conditions.
With a power supply range of 8V to 36V, this driver can adapt to a variety of power systems, increasing design flexibility.
A compact 4-terminal configuration simplifies connections and minimizes board space, optimizing design layouts.
Small outline package style is ideal for space-constrained applications and enables efficient layout designs.
The minimum supply voltage of 5.5V allows for compatibility with low-voltage systems, providing flexibility in diverse applications.
The tin-lead terminal finish enhances solderability, ensuring reliable connections during assembly and operation.
Dual terminal positioning aids in heat dissipation and improves the overall performance of the device.
A low maximum seated height allows for a slim profile, making it more suitable for compact devices.
At just 6.1 mm wide, this peripheral driver can fit into tight spaces, enabling flexibility in design.
The short length of 6.5 mm contributes to a compact form factor, allowing for efficient use of PCB real estate.
The capability to handle up to 9A output current makes this driver suitable for high-performance applications.
MOS technology offers fast switching speeds and high efficiency, enhancing performance in dynamic applications.
Gull wing terminals are beneficial for both automated and manual soldering processes, ensuring ease of assembly.
A nominal supply voltage of 13V provides an optimal operating point for many applications, ensuring reliability and performance.
A terminal pitch of 1.27 mm provides adequate spacing for connections, facilitating easy soldering and maintenance.
The ability to handle a nominal output peak current of 13A makes this driver robust for demanding applications.
This interface type enhances versatility, allowing for integration in a variety of buffering and signal inversion tasks.
The sink output current flow direction allows for straightforward interfacing with loads, making it easier to design circuits.
Peripheral Drivers VN820PT13TR-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
VN820PT13TR-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Unitrode
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crystalonics
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
IRS21844SPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
IRS21844MPBF
IRS21844MPBF by International Rectifier is a peripheral driver with 20V max supply voltage, 15V power supplies, and 2.3A output current limit. Ideal for automotive applications, it features transient protection and operates b/w -40 to 125 °C.
IRS2101SPBF
Infineon Technologies
IRS2101SPBF by Infineon Technologies is a Peripheral Driver with 8 terminals, operating voltage range of 10-20V. It offers built-in transient and under voltage protections, suitable for automotive applications due to its CMOS technology and small outline package style. With turn-on/off time of 0.22us, it can handle source/sink current flow up to 15V power supplies.
BTS6163DPB
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
MIC2981/82YN
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BTS50301EJAXUMA1
BTS50301EJAXUMA1 by Infineon is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a nominal output peak current limit of 5A. Ideal for automotive applications due to AEC-Q100 screening level.
ISP772TXT
Infineon Technologies' ISP772TXT is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring a small outline package style and sink output current flow direction.
TPS1HB08BQPWPRQ1
TPS1HB08BQPWPRQ1 by Texas Instruments is a 16-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125 °C with a supply voltage range of 6-18 V, making it suitable for automotive applications requiring high side drivers.
FDC6324L_NL
Fairchild Semiconductor's FDC6324L_NL is a Peripheral Driver with 6 terminals, 3/20V power supplies, and built-in transient protection. It features a small outline package style for compact designs. Ideal for applications requiring buffer or inverter-based peripheral drivers with source current flow direction.
VN5E160MSTR-E
STMicroelectronics' VN5E160MSTR-E is a peripheral driver with 8-28V power supplies, 1A max output current, and built-in protections. Ideal for applications requiring buffer or inverter-based interface ICs, it offers sink output current flow direction and operates at supply voltages ranging from 4.5V to 28V.
VND5050K-E
VND5050K-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
ISO8200B
ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.
TPS22916CLYFPR
TPS22916CLYFPR by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protections and is ideal for industrial applications requiring buffer or inverter based peripheral drivers.
LM3526M-L/NOPB
National Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UDN2987LW-6-T
Allegro MicroSystems
Allegro MicroSystems' UDN2987LW-6-T is a 20-terminal peripheral driver with a max supply voltage of 35V. It offers built-in protections for transient, over current, and thermal issues. Ideal for applications requiring a small outline package style and source output current flow direction.
ITS711L1FUMA1
ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.
VN340SP-33-E
STMicroelectronics' VN340SP-33-E is a 4-function peripheral driver with max supply voltage of 36V and output current of 1A. It features built-in protections for transient, thermal, and under voltage applications. Ideal for BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs in various electronic systems.
TPS4H160BQPWPRQ1
TPS4H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It features built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver capability.
BTS3408GXT
BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.
TLE6220GP
TLE6220GP by Infineon is a 20-terminal MOS driver with built-in protections for transient, over current, and over voltage. Operating at 5V with a max output current of 3A, it's ideal for automotive applications due to its AEC-Q100 screening level and small outline package style. With a turn-on/off time of 10us and sink output flow direction, it offers reliable performance in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN820PTTR-E
STMicroelectronics' VN820PTTR-E is a MOS technology-based peripheral driver with built-in protections. It operates at 5.5-36V, delivering up to 9A output current flow direction SOURCE. This small outline IC is ideal for applications requiring transient, overcurrent, overvoltage, thermal protection in compact designs.
VN820PT-E
VN820PT-E by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package driver is ideal for applications requiring source flow direction in automotive and industrial settings.
VN820-B5TR-E
STMicroelectronics' VN820-B5TR-E is a MOS technology-based peripheral driver with 1 function, capable of handling up to 9A output current. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. Ideal for applications requiring a source flow direction and a supply voltage range of 8-36V in compact designs.
VN820SP
VN820SP by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package is ideal for applications requiring source flow direction in automotive systems.
VN820B5-E
STMicroelectronics' VN820B5-E is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package is ideal for buffer or inverter applications requiring a source flow direction.
VN820SP-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V;
VN820SP13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 3.75 mm;
VN820SPTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HSOP; Package Shape: RECTANGULAR; Maximum Output Current: 9 A;
VN820SO13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
VN820SO13TR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VN820SO-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Technology: MOS;
VN820SO
VN820SOTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
VN820-12-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PZFM-T5;
VN820(011Y)
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Nominal Supply Voltage: 13 V; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Supply Voltage: 36 V; Minimum Supply Voltage: 5.5 V;
VN820-B5
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G4;
VN820PT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; JESD-609 Code: e0;
VN820PT13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
VN820-B513TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved