Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TSH111ID by STMicroelectronics is a versatile operational amplifier featuring a max input offset voltage of 2000 µV, a common mode reject ratio of 60 dB, and operates within -40 °C to 85°C. Ideal for industrial applications, it supports dual supply voltages of ±2.5V to ±12V. Its compact SO package ensures efficient surface mounting in space-constrained designs.
Median Price
$1.510
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Anansix
Classic Components Corporation
Zilex Electronics Inc.
Corphita
$1.431
Vigor
$1.670
IDEA Electronic Components Group
$3.527
$3.175
AZTECH Wire
$5.470
$5.250
$5.150
$5.050
MKK Technologies
$6.633
DigiPath Technology Company
A-Z Elektronik GmbH
Kepictronics
Perfect Parts
Parana Technologies
$4.217
The plastic/epoxy body material ensures durability and reliability in various operating conditions.
A low input offset voltage enhances precision and accuracy, making the op-amp suitable for sensitive applications.
The surface mount capability allows for easy integration into compact circuit designs and improves assembly efficiency.
The rectangular package shape optimizes space utilization on PCBs, ideal for space-constrained applications.
A high common mode rejection ratio minimizes the effects of noise, ensuring better signal integrity.
A nominal supply voltage of 2.5 V allows for low-power operation, making it suitable for battery-operated devices.
Versatile power supply options increase design flexibility for various applications.
Having 8 terminals provides the necessary connectivity for various circuit configurations.
A small outline package style reduces PCB footprint, making it ideal for space-saving designs.
A high minimum slew rate ensures fast response times, which is essential for high-frequency applications.
The maximum supply voltage limit ensures safe operation within a wide range of applications without risk of damage.
An operating temperature of up to 85 °C ensures reliability in demanding industrial environments.
Low bias current reduces errors in precision applications, such as signal conditioning.
Integrated frequency compensation helps maintain stability across various operating conditions.
This capability allows the op-amp to function in harsh cold environments, making it versatile for different applications.
Premium terminal finishes ensure excellent conductivity and longevity, enhancing overall performance.
Dual terminal positioning simplifies PCB design and layout, enabling more efficient circuit assembly.
The low seated height is particularly beneficial for designs that require minimal height profile.
A narrow width allows for denser PCB layouts without compromising functionality.
Higher tolerance at peak reflow temperatures ensures compatibility with modern soldering techniques.
High peak reflow temperatures allow for effective soldering without damaging the components.
A compact length facilitates integration into smaller circuit boards without affecting performance.
Rated for industrial applications, this op-amp is designed for rigorous environments and long-term reliability.
The negative supply voltage limit supports a wider range of circuit applications, enhancing flexibility.
Bipolar technology enables high speed and wide dynamic range, making it suitable for various applications.
Gull wing terminals provide excellent mechanical stability and facilitate easy soldering.
As an operational amplifier, this component is versatile for numerous applications like filtering, amplification, and signal processing.
A low maximum supply current contributes to energy efficiency, especially important in portable and battery-powered devices.
This nominal negative supply voltage facilitates compatibility with dual supply systems.
Current-feedback architecture allows for higher bandwidths and faster response times compared to voltage-feedback alternatives.
A high nominal slow rate enhances performance in rapid signal capture and processing applications.
The standard terminal pitch ensures compatibility with a wide range of PCB designs and footprints.
Operational Amplifiers (Op Amps) TSH111ID attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from STMicroelectronics
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Slew Rate:
Nominal Slew Rate:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
TSH111ID Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EU2B-YS3303C
Idec
ROTARY SWITCH;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LM358N
STMicroelectronics
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Continental Device India
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AD8676ARZ
Analog Devices
AD8676ARZ by Analog Devices is an Operational Amplifier with 250uV Max Input Offset Voltage, 4500uA Max Average Bias Current, and 130dB Nominal CMRR. Widely used in automotive applications due to its low-offset feature, it operates at -40 to 125 °C with a supply voltage of +-5/+-15V.
OPA2134UA/2K5
OPA2134UA/2K5 by Texas Instruments is a dual operational amplifier with 2000uV max input offset voltage, 100dB nominal CMRR, and 15V nominal voltage. Ideal for industrial applications requiring low-bias current and high slew rate performance in a compact package.
OPA2209AIDGKR
OPA2209AIDGKR by Texas Instruments is a dual operational amplifier with low offset voltage of 150uV and bias current of 0.015uA. Ideal for automotive applications, it offers high common mode rejection ratio of 130dB and unity gain bandwidth of 18MHz in a small outline package.
LM2904DRG4
LM2904DRG4 by Texas Instruments is an Operational Amplifier with 2 functions, featuring a Max Input Offset Voltage of 10000 uV and Nominal Voltage of 5 V. Widely used in automotive applications due to its small outline package style and low bias current for precision amplification needs.
OPA376AIDBVR
OPA376AIDBVR by Texas Instruments is a CMOS Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 5500kHz, and operates at temperatures ranging from -40 to 125 °C. Ideal for automotive applications due to its compact size, high common mode reject ratio, and low power consumption.
OPA2227UA/2K5
OPA2227UA/2K5 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at industrial temperature range, with voltage feedback architecture and 8000 kHz unity gain bandwidth. Ideal for precision applications requiring low bias current and offset voltage.
LM324N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
OPA690IDBVT
OPA690IDBVT by Texas Instruments is an operational amplifier with a max input offset voltage of 4000uV, ideal for industrial applications. It features a min slew rate of 550V/us and nominal unity gain bandwidth of 500000kHz, ensuring high performance in voltage-feedback architecture. With a compact package style and surface mount capability, it offers versatility in various electronic designs.
OPA551FA/500G3
OPA551FA/500G3 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 102dB, and unity gain bandwidth of 3000kHz. Ideal for automotive applications, it operates at temperatures ranging from -40 to 125°C and supports power supplies of +-4/+-30/8/60V.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
AD822ARZ
AD822ARZ by Analog Devices is an Operational Amplifier with 3000uV Max Input Offset Voltage, 80dB Nominal CMRR, and 1900kHz Unity Gain Bandwidth. Widely used in industrial applications for its low-bias, micropower features and VOLTAGE-FEEDBACK architecture.
MC33079DT
MC33079DT by STMicroelectronics is a 4-function operational amplifier with max input offset voltage of 3500uV and min slew rate of 5V/us. Widely used in industrial applications, it operates at temperatures ranging from -40 to 105°C, making it suitable for various voltage-feedback amplifier circuits.
LM324PT
LM324PT by STMicroelectronics is a quad operational amplifier with 14 terminals. It has a max input offset voltage of 9000 uV and operates at a nominal voltage of 5 V. With a unity gain bandwidth of 1300 kHz, it is commonly used in commercial applications requiring low bias current and micropower consumption.
LM2902D
Samsung
Samsung's LM2902D is a 4-function operational amplifier (Op Amp) with a max input offset voltage of 10000 uV. It is surface mountable and has a small outline package style, making it suitable for industrial applications requiring micropower amplification.
AD8479ARZ
OPERATIONAL AMPLIFIER; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
MC33202DR2G
MC33202DR2G by Onsemi is a dual operational amplifier with 11000 uV max input offset voltage and 90 dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 105 °C with a supply voltage of 5V. With a compact rectangular package style, it features low bias current and high slew rate for precision signal processing.
LM741H/NOPB
LM741H/NOPB by Texas Instruments is an Operational Amplifier with a max input offset voltage of 5000uV, 90dB common mode reject ratio, and 437kHz unity gain bandwidth. Ideal for military applications due to its MILITARY temperature grade, it operates at temperatures ranging from -55 to 125 °C and has a nominal voltage of +-15V.
INA105KU
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TSH11IDT
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TSH112IPT
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
TSH110IYLT
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
TSH114IPT
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
TSH113IDT
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
TSH112ID
TSH11IN
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TSH10IDT
TSH113ID
TSH114IDT
TSH113IPT
TSH111IPT
TSH11ID
TSH110ILT
TSH112IDT
TSH10ID
TSH10IN
TSH111IDT
TSH114ID
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved