Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STB18N55M5 by STMicroelectronics is a N-CHANNEL FET with 550V DS Breakdown Voltage, 52A IDM, and 0.24 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at up to 150 °C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Median Price
$6.840
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
$3.420
1k+ parts
-
10k+ parts
Vyrian
Digiode
Anansix
Microfarads
IDEA Electronic Components Group
$1.796
$1.616
MKK Technologies
$3.377
DigiPath Technology Company
AZTECH Wire
$12.290
Component Stockers USA
$99.990
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Alle Elektronik GmbH
Parana Technologies
$2.147
Corphita
Provides durability and protection for the transistor component, ensuring longevity and reliability in various operating conditions.
N-Channel FETs typically have better performance characteristics compared to P-Channel FETs, making them suitable for high-speed switching applications.
The built-in diode allows for improved efficiency and protection against reverse voltage spikes.
Designed specifically for switching applications, making it ideal for use in power control circuits.
Surface mount package allows for easy and convenient PCB assembly, saving space and reducing assembly costs.
High breakdown voltage ensures reliable operation in high voltage applications, providing robustness and safety.
High pulsed drain current rating allows for handling of large current surges, ideal for high-power applications.
High power dissipation capability allows for the transistor to handle heavy loads without overheating.
Wide operating temperature range ensures performance in various environmental conditions, enhancing versatility.
Low on-resistance results in minimal power loss and improved efficiency in switching applications.
Power Field Effect Transistors (FET) STB18N55M5 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Additional Features:
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
STB18N55M5 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - IPD/15/9345 04/Aug/2015
PCN Design/Specification - D2PAK Lead Modification 04/Oct/2013 IPG-PWR/14/8422 11/Apr/2014
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
1N4148W-T
Rectron
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Micro Commercial Components
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ZVN0545GTA
Diodes Incorporated
ZVN0545GTA by Diodes Inc. is a N-CHANNEL FET with 450V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, 0.6A IDM, and 50 ohm RDS(on). Operating in enhancement mode, it has a max power dissipation of 2W and operates b/w -55 to +150°C.
AUIRFZ44NSTRR
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 94 W; JESD-609 Code: e3; Terminal Position: SINGLE;
IRLML2502TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain-Source On Resistance: .045 ohm;
SQM120P06-07L-GE3
Vishay Intertechnology's SQM120P06-07L-GE3 is a P-channel power FET with 60V DS breakdown voltage, 120A max drain current, and 0.0067 ohm on-resistance. Ideal for high-power applications in enhancement mode operation with 480A pulsed drain current capability.
STP11NK50ZFP
STP11NK50ZFP by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, 40A IDM, and 0.52 ohm RDS(on). Ideal for SWITCHING applications due to its 30W power dissipation, 190mJ EAS rating, and ENHANCEMENT MODE operation at up to 150°C.
IRLML2060TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Transistor Element Material: SILICON; Transistor Application: SWITCHING;
NDT3055L
NDT3055L by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 25A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a RECTANGULAR package. Operating from -65 to 150 °C, it has 0.1 ohm Drain-Source Resistance and 3W Power Dissipation.
RFD14N05LSM9A
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-252AA; Qualification: Not Qualified; Maximum Turn Off Time (toff): 100 ns;
IRFS7530TRL7PP
Infineon's IRFS7530TRL7PP is a N-CHANNEL FET with 60V DS Breakdown Voltage, 240A ID, and 0.0014 ohm RDS(on). Ideal for power applications, it offers 375W Pd max, operates up to 175°C, and features MOSFET technology. Suitable for surface mount designs with matte tin finish.
IRFP4568PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 517 W; Terminal Finish: MATTE TIN OVER NICKEL; Peak Reflow Temperature (C): 250;
IRF640PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Drain Current (ID): 18 A; Terminal Form: THROUGH-HOLE;
FQD3P50TM
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Qualification: Not Qualified; Maximum Operating Temperature: 150 Cel;
FDS4675
FDS4675 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 50A and ID of 11A, with 0.013 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE and can withstand temperatures from -55 to 175 °C.
FQP27P06_SW82127
FQP27P06_SW82127 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 108A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and operates in ENHANCEMENT MODE. With a max power dissipation of 120W, this transistor has a -55 to 175 °C operating temperature range.
IRFP460APBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; JESD-609 Code: e3; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
JANTX2N6796
Unitrode
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation Ambient: 25 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Pulsed Drain Current (IDM): 32 A;
IPB200N25N3GATMA1
Infineon's IPB200N25N3GATMA1 is a N-CHANNEL FET with 250V DS breakdown voltage, 0.02 ohm max RDS(on), and 256A IDM. Ideal for switching applications, it operates in enhancement mode with a built-in diode. The transistor features GULL WING terminals, can handle up to 175°C, and has an EAS of 320mJ.
FDMC86139P
FDMC86139P by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.067 ohm RDS(on), and operates in ENHANCEMENT MODE.
SI7155DP-T1-GE3
Vishay Intertechnology's SI7155DP-T1-GE3 is a P-channel FET with 40V DS breakdown voltage and 200A pulsed drain current. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 104W. The MOSFET features a drain-source on resistance of 0.0046 ohm and can withstand temperatures from -55 to 150°C.
FDS4559
FDS4559 by Onsemi is a Power FET with N-Channel and P-Channel types, ideal for switching applications. It features a 60V min DS breakdown voltage, 20A max pulsed drain current, and 0.055 ohm max drain-source resistance. With a small outline package style and matte tin terminal finish, it operates in enhancement mode up to 175°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STB11NM80T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 205 W; Transistor Application: SWITCHING; Terminal Finish: MATTE TIN;
STB120NF10T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 312 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (ID): 120 A;
STB100N10F7
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Peak Reflow Temperature (C): NOT SPECIFIED; JESD-30 Code: R-PSFM-T3; Transistor Element Material: SILICON;
STB140NF55T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 300 W; Case Connection: DRAIN; Minimum DS Breakdown Voltage: 55 V;
STB18N65M5
STB18N65M5 by STMicroelectronics is a N-CHANNEL FET with 650V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 60A IDM, 0.22 ohm RDS(on), and 210mJ EAS. Its GULL WING terminals and ENHANCEMENT MODE operation make it suitable for various power electronics designs.
STB11NM60T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 160 W; Operating Mode: ENHANCEMENT MODE; No. of Terminals: 2;
STB13N60M2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; JESD-30 Code: R-PSSO-G2; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
STB12NM50T4
STB12NM50T4 by STMicroelectronics is a N-CHANNEL FET with 500V DS breakdown voltage, 48A IDM, and 0.35 ohm RDS(on). Ideal for switching applications, it operates in enhancement mode with 160W max power dissipation. Suitable for surface mount assembly, it has a max operating temperature of 150°C.
STB19NF20
STB19NF20 by STMicroelectronics is a N-CHANNEL FET for SWITCHING applications. It has a 200V DS Breakdown Voltage, 60A IDM, and 0.16 ohm RDS(on). Operating in ENHANCEMENT MODE, it can handle up to 90W power dissipation. Ideal for high-power switching circuits requiring efficient performance.
STB15N80K5
STB15N80K5 by STMicroelectronics is a N-CHANNEL Power FET with 800V DS Breakdown Voltage. It has 56A IDM and 14A ID, suitable for SWITCHING applications. Operating in ENHANCEMENT MODE, it offers 0.375 ohm Drain-Source On Resistance and can handle up to 190W power dissipation.
STB11N65M5
STB11N65M5 by STMicroelectronics is a N-CHANNEL FET with 650V DS breakdown voltage, 36A IDM, and 0.48 ohm RDS(on). Ideal for switching applications, it operates in enhancement mode with 85W max power dissipation. Suitable for surface mount design with GULL WING terminals, it can withstand temperatures from -55 to 150 °C.
STB160N75F3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 330 W; Transistor Application: SWITCHING; No. of Elements: 1;
STB12NK80ZT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 190 W; Maximum Drain Current (ID): 10.5 A; Package Body Material: PLASTIC/EPOXY;
STB10N95K5
STB10N95K5 by STMicroelectronics is a N-CHANNEL FET with 950V DS Breakdown Voltage, 32A IDM, and 0.8 ohm RDS(on). It is used for SWITCHING applications in ENHANCEMENT MODE with 122mJ EAS rating.
STB18N60M2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Terminal Position: SINGLE; JEDEC-95 Code: TO-263AB;
STB13N80K5
STB13N80K5 by STMicroelectronics is a N-CHANNEL FET with 800V DS breakdown voltage, 48A IDM, and 0.45 ohm RDS(on). Ideal for switching applications, it operates in enhancement mode with a built-in diode. The transistor's package is small outline with gull wing terminals and can handle peak reflow temperatures up to 245°C.
STB100NF03L-03-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Terminal Form: THROUGH-HOLE; Maximum Drain Current (ID): 100 A;
STB18N60DM2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain-Source On Resistance: .295 ohm;
STB13NK60ZT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 135 W; Maximum Drain-Source On Resistance: .55 ohm; No. of Terminals: 2;
STB18NM80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 190 W; Package Shape: RECTANGULAR; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved