Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
M24C04-WMN6P by STMicroelectronics is a 4096-bit EEPROM with 512x8 organization, operating at 5V. It features I2C control byte 1010DDMR and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
Median Price
$0.168
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Arrow
1+ parts
$0.118
100+ parts
$0.113
1k+ parts
$0.083
10k+ parts
$0.082
DigiKey
$0.230
$0.206
$0.191
$0.181
Newark
$0.237
$0.212
$0.197
$0.166
Avnet
-
Verical
$0.112
$0.081
Chip1Stop
$0.178
$0.135
$0.087
Element14
$0.235
$0.192
$0.185
Farnell
$0.158
$0.148
$0.141
Distrelec
EBV Elektronik
Future Electronics
Digiode
$0.022
Greenchips
$0.107
$0.102
$0.092
Nova Conductors
$0.163
TME
$0.210
$0.153
$0.136
ComSIT Distribution GmbH
ComSIT USA
Vyrian
IBS Electronics
$0.125
$0.099
Chip Stock
Component Sense
$0.263
$0.150
LIBRA Elektronik GmbH
Anansix
Schukat
$0.170
Bas Electronics GmbH & Co. KG
Zilex Electronics Inc.
Corel Iberica Componentes, S.L.
Classic Components Corporation
Semtec, LLC
Prism Electronics
ACDS - Activité Composants Distribution Service
J2 Sourcing AB
Inventory MP
PC Components Company LLC
Holdelec - ElecDif-Pro
Speed Components Ltd
Connector Distribution Corp
Right Parts Inc.
Cyclops Electronics Ltd
Bristol Electronics
Pegasus Components GmbH
Semicontronic
$0.020
$0.019
Corphita
$0.021
Ampacity Inc.
$0.093
Component Stockers USA
$0.100
$0.130
Continental Prestige Electronics
$0.162
$0.104
Netroflash
Argo Parts USA
Advanced Electronics
$2.255
$2.142
Aztec Data Supply Inc.
$2.810
Modulus Dynamics
$4.116
IDEA Electronic Components Group
$4.177
$3.759
Corohmni
$5.078
MKK Technologies
$7.854
DigiPath Technology Company
Perfect Parts
Eastek
Lixinc
A-Z Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Alle Elektronik GmbH
Metaverse IC Inc.
Assy Fe
Parana Technologies
$4.994
Robosynatics
Lucentia Tech
$2.483
$2.433
Futuretech Components
GreenTree Electronics
Provides durability and protection for the EEPROM, ensuring a longer lifespan.
Compatible with standard 5V power supplies, making it easy to integrate into existing systems.
Suitable for industrial environments where higher temperatures may be encountered.
Offers a good balance between storage capacity and data organization for various applications.
Supports efficient data transfer rates, making it suitable for applications with moderate performance requirements.
Utilizes I2C communication protocol for easy interfacing with other devices.
Ensures reliable and long-term use with a high number of write/erase cycles.
Uses I2C serial bus for easy integration and communication with other devices in a system.
EEPROM M24C04-WMN6P attributes and parameters. Explore more EEPROM devices from STMicroelectronics
Maximum Clock Frequency (fCLK):
Minimum Data Retention Time:
Endurance:
I2C Control Byte:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Serial Bus Type:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Maximum Write Cycle Time (tWC):
Write Protection:
M24C04-WMN6P Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.51
SB
8542.32.00.50
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
STMicroelectronics
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
DS2431P+T&R
Analog Devices
Analog Devices' DS2431P+T&R is a 1Kx1 EEPROM with 1024-bit memory density. Operating at 3.3V, it offers 50,000 write/erase cycles and uses a serial bus type of 1-WIRE. Ideal for industrial applications requiring reliable data storage in a compact rectangular package style.
25AA256-I/SM
Microchip Technology
25AA256-I/SM by Microchip Technology is a SPI EEPROM with 32KX8 organization, operating at 2.5V, and offering 262144-bit memory density. It features hardware/software write protection, AEC-Q100 screening level for industrial applications, and supports a max clock frequency of 10 MHz. Ideal for automotive electronics, IoT devices, and industrial control systems.
CAT25640VI-G
Catalyst Semiconductor
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
CAT24C128HU4IGT3
Onsemi
CAT24C128HU4IGT3 by Onsemi is an EEPROM with 16KX8 organization, 131072 bit memory density, and 1000000 Write/Erase Cycles endurance. It operates in synchronous mode at a clock frequency of 1 MHz via I2C serial bus. Ideal for industrial applications requiring reliable non-volatile memory storage.
BR93H56RF-2CE2
ROHM
BR93H56RF-2CE2 by ROHM is an AEC-Q100 EEPROM with 128x16 organization, operating at 4V. It offers 2048-bit memory density, MICROWIRE serial bus type, and 1000000 write/erase cycles. Ideal for automotive applications requiring reliable data storage in harsh environments.
25LC256T-I/ST
Microchip's 25LC256T-I/ST is an EEPROM with 32KX8 organization, SPI serial bus type, and 262144-bit memory density. It operates at -40 to 85 °C with a max clock frequency of 10 MHz. Ideal for industrial applications requiring reliable non-volatile memory storage.
CAT24M01HU5I-GT3
CAT24M01HU5I-GT3 by Onsemi is an EEPROM with 128KX8 organization, 1048576 bit memory density, and SPI serial bus type. It operates at a max clock frequency of 0.4 MHz and has a write protection feature for hardware security. Ideal for industrial applications requiring reliable non-volatile memory storage.
93LC56BT-E/OT
93LC56BT-E/OT by Microchip: 2048-bit EEPROM with 128x16 organization, operates at 2MHz clock frequency. Ideal for automotive applications due to TS16949 screening level and -40°C to 125°C temperature range. Features software write protection and MICROWIRE serial bus type.
24AA32A-I/SNG
24AA32A-I/SNG by Microchip Technology is a small outline EEPROM with 4Kx8 organization, I2C serial bus type, and 1000000 write/erase cycles. It operates at -40 to 85°C, has a max clock frequency of 0.1 MHz, and is suitable for industrial applications requiring reliable non-volatile memory storage.
24AA02E64T-I/OT
24AA02E64T-I/OT by Microchip Technology is a 256x8 EEPROM with I2C control byte 1010XXXR. Operating at -40 to 85 °C, it offers 1000000 write/erase cycles and has a max clock frequency of 0.4 MHz. Ideal for industrial applications requiring reliable non-volatile memory storage.
AT24C04C-SSHM-B
The Microchip Technology AT24C04C-SSHM-B is a 512x8 EEPROM with I2C serial bus, operating at 1 MHz. It has a supply voltage range of 2.5V to 5.5V and endurance of 1M cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs with low power consumption.
M95M04-DRMN6TP
M95M04-DRMN6TP by STMicroelectronics is a 512KX8 EEPROM with 10 MHz clock frequency, SPI serial bus type, and 1200000 write/erase cycles. It is used in industrial applications for data storage due to its small outline package and low standby current of 0.000002 Amp.
AT24C512C-XHM-B
Atmel
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
24LC256-I/ST
24LC256-I/ST by Microchip Technology is an EEPROM with 32KX8 organization, operating at 4.5V, and featuring I2C control byte 1010DDDR. It has a max clock frequency of 0.4 MHz and can endure up to 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage.
XCF02SVO20CES
Xilinx
Xilinx XCF02SVO20CES is a 2Mx1 EEPROM with 2097152-bit memory density. Operating at 3.3V, it features a small outline package and operates in industrial temperature range. Ideal for configuration memory applications, it offers serial interface and dual terminal position with 0.65mm pitch.
DS2433
Dallas Semiconductor
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 3; Package Shape: ROUND; Memory Width: 8; JESD-30 Code: O-PBCY-T3;
M95256-DRDW3TP/K
STMicroelectronics M95256-DRDW3TP/K is an AEC-Q100 EEPROM with 32KX8 organization, SPI serial bus type, and 4000000 write/erase cycles. It operates at -40 to 125 °C, suitable for automotive applications requiring reliable data storage in a compact form factor.
AT25M02-SSHD-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
24LC02BT-I/OTG
24LC02BT-I/OTG by Microchip Technology is a 256x8 EEPROM with 2048-bit memory density. It operates at 5V, has a max clock frequency of 0.4 MHz, and offers hardware write protection. Ideal for industrial applications requiring reliable data storage in a compact package.
25LC1024T-I/SM
25LC1024T-I/SM by Microchip is a 128KX8 EEPROM with SPI interface, operating at 20 MHz. It has 1000000 Write/Erase Cycles endurance and supports hardware/software write protection. Ideal for industrial applications requiring reliable non-volatile memory with small footprint and low power consumption.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M24C64-RMN6TP
M24C64-RMN6TP by STMicroelectronics is an 8KX8 EEPROM with a memory density of 65536 bit. It operates in synchronous mode at a max clock frequency of 0.4 MHz, suitable for industrial applications requiring reliable data storage and retrieval. With a write protection feature and endurance of 1000000 Write/Erase Cycles, it offers secure and durable memory solutions.
M24C02-WMN6TP
M24C02-WMN6TP by STMicroelectronics is an EEPROM with 256x8 organization, I2C serial bus type, and 2048-bit memory density. It operates in industrial temperature grade, has a max clock frequency of 0.4 MHz, and offers 1000000 write/erase cycles endurance. Ideal for applications requiring reliable non-volatile memory storage in compact electronic devices.
M24C02-WMN6P
STMicroelectronics' M24C02-WMN6P is an EEPROM with 256x8 organization, I2C serial bus type, and 2048-bit memory density. It operates at a max clock frequency of 0.4 MHz and has a write protection feature for hardware security. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
M24C64-WMN6TP
STMicroelectronics M24C64-WMN6TP is an 8Kx8 EEPROM with I2C control byte. It operates at 5V, has 1000000 write/erase cycles endurance, and supports serial bus type I2C. Ideal for industrial applications requiring reliable non-volatile memory storage with a max clock frequency of 0.4 MHz.
M24C16-DRMF3TG/K
EEPROM; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
M24C64-WMN6P
M24C64-WMN6P by STMicroelectronics is an 8KX8 EEPROM with I2C control byte. It operates at 5V, has 8192 words, and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
M24C02-RMN6TP
M24C02-RMN6TP by STMicroelectronics is an EEPROM with 256x8 organization, I2C serial bus type, and 1000000 write/erase cycles endurance. It operates at a max clock frequency of 0.4 MHz and is suitable for industrial temperature grade applications.
M24C02-RDW6TP
STMicroelectronics M24C02-RDW6TP is an EEPROM with 256x8 organization, I2C serial bus type, and 2048-bit memory density. It operates at a max clock frequency of 0.4 MHz and has a write protection feature for hardware security. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
M24C64-WMN6TPP
M24C64-WMN6TPP by STMicroelectronics is an EEPROM with a memory density of 65536 bit. It operates in synchronous mode and has a max clock frequency of 0.4 MHz. This IC is commonly used in industrial applications for its endurance of 1,000,000 write/erase cycles.
M24C32-WMN6TP
M24C32-WMN6TP by STMicroelectronics is an EEPROM with 4Kx8 organization, operating in synchronous mode at a clock frequency of 1 MHz. It features a serial I2C bus type and offers a memory density of 32768 bits. This small outline package is ideal for industrial applications requiring reliable non-volatile memory storage.
M24C04-RMN6TP
M24C04-RMN6TP by STMicroelectronics is an EEPROM with 512x8 organization, operating at 2.5V, and featuring I2C control byte 1010DDMR. It is used in industrial applications for serial data storage due to its endurance of 1M write/erase cycles and low standby current of 0.000001Amp.
M24C02-WMN6TP/S
M24C02-WMN6TP/S by STMicroelectronics is a 2048-bit EEPROM with SPI serial bus, operating at 0.4 MHz clock frequency. It has an industrial temperature grade range from -40 to 85°C and a supply voltage of 2.5V to 5.5V. Ideal for applications requiring small outline packages and low power consumption in various industries.
M24C02-RMC6TG
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Maximum Supply Voltage (Vsup): 5.5 V;
M24C16-WMN6P
M24C02-WDW6TP
STMicroelectronics M24C02-WDW6TP is an EEPROM with 256x8 organization, I2C control byte 1010DDDR, and 2048-bit memory density. It operates in serial mode with a max clock frequency of 0.4 MHz. Ideal for industrial applications requiring reliable data storage with endurance of 1M write/erase cycles.
M24C08-WMN6P
M24C08-WMN6P by STMicroelectronics is an EEPROM with 1KX8 organization, 8192 bit memory density, and 1000000 Write/Erase cycles endurance. It operates in serial mode via I2C bus at a max clock frequency of 0.4 MHz. Ideal for industrial applications requiring reliable non-volatile memory storage.
M24C02-FMN6TP
EEPROM; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
M24C32-FMC6TG
STMicroelectronics' M24C32-FMC6TG is an EEPROM with 4Kx8 organization, operating at 1.8V, and featuring I2C serial bus type. It has a max clock frequency of 0.4 MHz and can endure up to 1,000,000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
M24C32-WMN6P
STMicroelectronics' M24C32-WMN6P is a 32Kbit EEPROM with I2C serial bus, operating at 2.5-5.5V. It has 4Kx8 organization, 4096 words, and operates at -40 to 85°C. With a clock frequency of 0.4MHz and synchronous mode, it's ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved