Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' DS1961S-F5+ is a 1KX1 EEPROM with 1024-bit memory density. It operates in synchronous mode on a 1-WIRE serial bus, with a supply voltage range of 2.8V to 5.25V. This round disk button package is ideal for applications requiring secure non-volatile memory storage.
Median Price
$9.630
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$7.040
100+ parts
$5.540
1k+ parts
$5.100
10k+ parts
-
Analog Devices Inc
$8.420
$7.225
$6.642
Mouser Electronics
$8.230
$7.750
DigiKey
$8.258
$7.589
Newark
$9.920
$8.510
$8.020
Element14
$10.580
$8.520
$7.590
Avnet
Verical
$5.716
$5.179
$5.022
Nova Conductors
$5.260
Digiode
$6.688
Anansix
Vyrian
MARBEL Systems
$2.638
Texas Native Microelectronics
$3.032
$2.911
$2.820
$2.668
Kenton Components
$3.638
$3.202
Corohmni
$4.853
Ampacity Inc.
$4.860
Semicontronic
$4.738
$4.714
Continental Prestige Electronics
$5.720
$4.560
$4.140
Corphita
$6.336
Qasali Group International
$8.186
$7.613
$7.204
Perfect Parts
Robosynatics
$4.756
$4.659
Lucentia Tech
Argo Parts USA
Glotronic Ltd.
Formix International (Excess)
Netroflash
$5.154
$4.997
$4.891
Kepictronics
Authorized Procurement Solutions
The metal package body provides durability and protection for the EEPROM, making it suitable for harsh environmental conditions.
The surface mount feature allows for easy installation on PCBs, making it convenient for integration into electronic devices.
The synchronous operating mode ensures reliable and efficient data transfer, enhancing the overall performance of the EEPROM.
Having only 2 terminals simplifies the connections required for the EEPROM, making it easier to implement in circuit designs.
The CMOS technology used in the EEPROM results in low power consumption, making it energy-efficient and ideal for portable devices.
With a memory density of 1024 bits, this EEPROM provides sufficient storage capacity for storing data and program codes.
EEPROM DS1961S-F5+ attributes and parameters. Explore more EEPROM devices from Analog Devices
JESD-30 Code:
JESD-609 Code:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Package Body Material:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Qualification:
Serial Bus Type:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Position:
DS1961S-F5+ Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.51
SB
8542.32.00.50
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Plessey Semiconductors Discrete Components Div
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
M24C02-RMC6TG
STMicroelectronics
STMicroelectronics M24C02-RMC6TG is an EEPROM with 256x8 organization, I2C serial bus type, and 2048-bit memory density. It operates at a max clock frequency of 0.4 MHz and has a write protection feature for hardware security. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
24LC64-I/SN
Microchip Technology
24LC64-I/SN by Microchip Technology is an EEPROM with 8KX8 organization, 65536 bit memory density, and 1000000 Write/Erase Cycles endurance. It operates in synchronous mode with I2C serial bus type, suitable for industrial temperature grade applications. With a small outline package style and dual terminal position, it offers reliable data storage solutions.
XCF01SVO20C0936
Xilinx
Xilinx XCF01SVO20C0936 is a 1MX1 EEPROM with 1048576 bit memory density. Operating at 3.3V, it has a temperature range of -40 to 85 °C and uses CMOS technology. Ideal for industrial applications, this SERIAL memory IC features a 0.65mm terminal pitch in a SMALL OUTLINE package style.
25LC256T-I/SM
25LC256T-I/SM by Microchip Technology is a SPI EEPROM with 32KX8 organization, 262144 bit memory density, and 1000000 Write/Erase Cycles endurance. It operates at -40 to 85 °C, has a max clock frequency of 10 MHz, and is ideal for industrial applications requiring reliable non-volatile memory storage.
24LC02BT-I/SN
24LC02BT-I/SN by Microchip Technology is a small outline EEPROM with 256x8 organization, operating at 5V. It features I2C control byte, hardware write protection, and endurance of 1M cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
24LC01BT-I/OT
24LC01BT-I/OT by Microchip Technology is a small outline, low profile EEPROM with a memory density of 1024 bit. It operates in synchronous mode and has a max clock frequency of 0.4 MHz. This IC is commonly used in industrial applications for its endurance of 1 million write/erase cycles and I2C serial bus type.
XCF01SVOG20CES
Xilinx XCF01SVOG20CES is a 1MX1 EEPROM with 1048576 bit memory density. Operating at 3.3V, it offers industrial-grade temperature range of -40 to 85 °C. Ideal for configuration memory applications, this serial CMOS technology device has a small outline package with dual terminal position and matte tin finish.
M95512-WMN6P/K
EEPROM;
AT24C02C-SSHM-T-537
AT24C02C-SSHM-T-537 by Microchip: 256x8 EEPROM with I2C control, 2048-bit memory density, and 1MHz clock frequency. Ideal for industrial applications requiring reliable data storage in a compact package. Operating range from -40 to 85°C makes it suitable for various environments.
M95512-RMN6P
M95512-RMN6P by STMicroelectronics is an EEPROM with 64KX8 organization, operating at 2.5V, featuring SPI serial bus type and 1000000 write/erase cycles endurance. It has a small outline package style, suitable for industrial temperature grade applications with a max clock frequency of 5 MHz.
DS28E07Q+T
Analog Devices
DS28E07Q+T by Analog Devices is a 1Kx1 EEPROM with 1024-bit memory density. It operates in industrial temperature range (-40 to 85°C) and supports serial communication via 1-WIRE bus. With a small outline package, it's ideal for applications requiring low power consumption and secure data storage.
24LC64T-I/SN
24LC64T-I/SN by Microchip Technology is an EEPROM with 8KX8 organization, 8192 words, and 65536 bit memory density. It operates at a max clock frequency of 0.4 MHz in industrial temperature grade applications. Featuring I2C serial bus type, it offers 1000000 write/erase cycles endurance for reliable data storage.
M24M01-DFCS6TP/K
M24M01-DFCS6TP/K by STMicroelectronics is a 128KX8 EEPROM with a synchronous operating mode and a max clock frequency of 1 MHz. It is used in industrial applications and has a temperature range of -40 to 85°C.
AT24C08C-SSHM-B
Atmel
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
AT24CM01-XHM-T
The Microchip AT24CM01-XHM-T is a 128Kx8 EEPROM with I2C control, operating at 1MHz. It has a supply voltage range of 2.5V to 5.5V and offers 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact, surface-mount package measuring 4.4mm x 3mm with a low standby current of 0.000001Amp.
AT28C256-15PU
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Memory Width: 8;
AT24C128C-SSHM-B
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;
24AA02E48-E/SN
24AA02E48-E/SN by Microchip Technology is an EEPROM with 256x8 organization, operating at 5V. It features I2C control byte 1010XXXR and offers 1000000 write/erase cycles. Ideal for automotive applications due to its TS16949 screening level and -40 to 125°C temperature range.
CAT25256VI-GT3
Catalyst Semiconductor
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
AT28C256E-15JU
AT28C256E-15JU by Microchip Technology is a 32Kx8 EEPROM with a memory density of 262144 bits. It operates at an asynchronous mode and has a max access time of 150 ns. This chip is commonly used in industrial applications for its endurance of 100000 write/erase cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
DS1990A-F5#
Maxim Integrated
DS1990A-F5# by Maxim Integrated is a 64-bit EEPROM with 1-WIRE serial bus. Operating from -40 to 85°C, it has a memory density of 64 bits and uses CMOS technology. Ideal for industrial applications requiring asynchronous operation in a round metal package.
DS1990A-F5+
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Maximum Operating Temperature: 85 Cel; Maximum Supply Voltage (Vsup): 6 V;
DS1990A-F5
Dallas Semiconductor
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Package Equivalence Code: BUTTON,.68IN; Terminal Form: NO LEAD;
DS1990A-F5+ by Analog Devices is a 64-bit EEPROM with 1-WIRE serial bus. Operating at 3.3V, it has an industrial temperature grade and asynchronous mode. Ideal for applications requiring secure data storage in harsh environments.
DS1990A-F5 by Maxim Integrated is a 64-bit EEPROM with 1-WIRE serial bus. Operating at 3.3V, it has an industrial temperature grade and asynchronous mode. Ideal for applications requiring secure data storage in harsh environments.
DS1961S-F5+
EEPROM; Temperature Grade: OTHER; No. of Terminals: 2; Package Shape: ROUND; Operating Mode: SYNCHRONOUS; No. of Functions: 1;
DS1961S-F5#
EEPROM; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 2; Package Shape: ROUND; No. of Words: 1024 words; Memory Width: 1;
DS1961S-F5
DS1961S-F5 by Maxim Integrated is a 1KX1 EEPROM with 1024-bit memory density. It operates on a synchronous mode at 3/5V, featuring a serial bus type of 1-WIRE. This metal package disk button is ideal for secure authentication applications in various industries.
DS1977-F5+
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Organization: 256KX1; Technology: CMOS;
DS1977-F5#
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; JESD-30 Code: O-MEDB-N2; Terminal Finish: Matte Tin (Sn) - annealed;
DS1977-F5
DS1977-F5 by Maxim Integrated is a 256Kx1 EEPROM with 262144-bit memory density. It operates in synchronous mode at 3.3V, with a temperature range of -40 to 85°C. Ideal for industrial applications, it features a serial bus type of 1-WIRE and comes in a round metal package style.
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Package Style (Meter): DISK BUTTON; Memory Density: 262144 bit;
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Technology: CMOS; Minimum Operating Temperature: -40 Cel;
DS1971-F5+
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; JESD-30 Code: O-MEDB-N2; JESD-609 Code: e3;
DS1971-F5
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Nominal Supply Voltage / Vsup (V): 5; Memory Width: 8;
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Moisture Sensitivity Level (MSL): 1; Memory Width: 8;
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn) - annealed;
DS1973-F5
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Surface Mount: YES; Memory Density: 4096 bit;
DS1973-F5+
DS1973-F5+ by Analog Devices is a 1-WIRE EEPROM with 4096-bit memory density and operates in synchronous mode at 0.0163 MHz. It has a temperature range of -40 to 85 °C, making it suitable for industrial applications requiring reliable non-volatile memory storage. The device features a serial interface, low supply voltage of 2.8 V, and compact round disk button package ideal for space-constrained designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved