Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics' BTA26-800B is a TRIAC with 800V repetitive peak off-state voltage, 25A max RMS on-state current, and 1.5V max DC gate trigger voltage. Ideal for applications requiring precise AC power control in industrial equipment, lighting systems, and home appliances.
Median Price
$2.273
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
TME
1+ parts
$1.820
100+ parts
$1.270
1k+ parts
$1.090
10k+ parts
-
Chip Stock
VNN
Tectiva GmbH
Digiode
Nova Conductors
Anansix
Vyrian
Micros
$2.372
Partservice
$2.174
Micros sp.j. W. Kędra i J. Lic
$2.493
ECAB
ComSIT Distribution GmbH
Ampacity Inc.
$1.100
Aztec Data Supply Inc.
$2.750
Corohmni
$3.232
IDEA Electronic Components Group
$3.753
$3.377
MKK Technologies
$7.057
DigiPath Technology Company
Semicontronic
$14.100
$13.748
$13.677
AZTECH Wire
$17.100
$16.420
$16.090
$15.770
Kepictronics
Lixinc
RC Electronics
Continental Prestige Electronics
Authorized Procurement Solutions
Parana Technologies
$4.487
S.R.D Solutions
Corphita
Argo Parts USA
Futuretech Components
Bastille Electronics
The use of plastic/epoxy material in the package body ensures durability and reliability of the product, making it suitable for various applications.
The high maximum DC gate trigger current allows for efficient and reliable switching of the TRIAC, ensuring stable operation.
The single configuration simplifies the design and installation process, making it easier to integrate the TRIAC into different systems.
The high maximum RMS on-state current capability makes this TRIAC suitable for applications requiring high power handling capacity.
The high repetitive peak off-state voltage rating ensures that the TRIAC can withstand high voltage spikes, enhancing its reliability and safety.
Triode For Alternating Current (TRIAC) BTA26-800B attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from STMicroelectronics
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Commutation Voltage:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum RMS On-state Current:
Maximum Repetitive Peak Off-state Leakage Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
BTA26-800B Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0520LT1
Motorola
Weitron Technology
Good-ark Electronics
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
TIC225A
Texas Instruments
TIC225A by Texas Instruments is a TRIAC with 15mA DC gate trigger current, 8A RMS on-state current, and 110°C max operating temp. Ideal for AC power control applications due to its high performance in handling up to 100V repetitive peak off-state voltage and fast commutation voltage rise rates of 5V/µs.
BT139-800E,127
NXP Semiconductors
BT139-800E,127 by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage and 16A max RMS on-state current. It has a trigger device type of 4 quadrant logic level TRIAC and can operate at temperatures up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BTA26-600B
BTA26-600B by STMicroelectronics is a TRIAC with a max RMS on-state current of 25A and a repetitive peak off-state voltage of 600V. It is commonly used in applications requiring 4 quadrant logic level TRIACs, such as motor control and lighting systems.
T405-600B
T405-600B by STMicroelectronics is a single TRIAC with 4A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125 °C, suitable for applications requiring a 4-quadrant logic level TRIAC like dimmers, motor control, and heating control systems.
MAC229A8FP
MAC229A8FP by Onsemi is a 4 Quadrant Logic Level TRIAC with 600V Repetitive Peak Off-state Voltage. It has a Max RMS On-state Current of 8A and Max DC Gate Trigger Current of 20mA. Ideal for applications requiring precise AC switching in temperatures ranging from -40 to 110 °C.
MAC4DCM-1G
MAC4DCM-1G by Onsemi is a TRIAC with 500mA DC gate trigger current, 4A RMS on-state current, and 600V repetitive peak off-state voltage. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
PT140
Hutson Industries
PT140 by Hutson Industries is a TRIAC with a max on-state voltage of 2V and max DC gate trigger current of 100mA. It can handle a max RMS on-state current of 40A and has a repetitive peak off-state voltage of 100V. This device is commonly used in applications requiring alternating current control.
BTA06-600BRG
BTA06-600BRG by STMicroelectronics is a 4-quadrant logic level TRIAC with 600V repetitive peak off-state voltage and 6A max RMS on-state current. It has a max DC gate trigger current of 50mA and operates b/w -40°C to 125°C. Ideal for applications requiring precise AC power control in industrial settings.
Q6025L6TP
Littelfuse
Q6025L6TP by Littelfuse is a TRIAC with 25A RMS on-state current, 600V repetitive peak off-state voltage, and 80mA max DC gate trigger current. Ideal for applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
DTB12E
DTB12E by Onsemi is a TRIAC with 1.3V max on-state voltage, 50mA DC gate trigger current, and 2mA max leakage current. Ideal for AC applications up to 12A RMS on-state current, it operates at a max temperature of 125 °C.
TIC215B
TIC215B by Texas Instruments is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 3A. It operates b/w -40 to 110°C, suitable for AC power control in various applications like dimmers and motor speed controllers due to its 4-quadrant logic level TRIAC configuration.
MAC997A8RL1G
MAC997A8RL1G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 0.8A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
DTA1C
DTA1C by Onsemi is a TRIAC with 1A RMS current, 200V repetitive peak off-state voltage, and 125 °C max operating temp. Ideal for AC power control applications due to its low leakage current of 0.01mA, high holding current of 10mA, and trigger device type.
SC265M2
Loras Industries
TRIAC; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
TIC236N
TIC236N by Texas Instruments is a TRIAC with 12A RMS current, 800V repetitive peak off-state voltage, and 125°C max operating temp. Ideal for AC power control applications due to its 50mA gate trigger current, -40°C min operating temp, and 2mA leakage current.
BTA08-800CRG
BTA08-800CRG by STMicroelectronics is a 4-quadrant logic level TRIAC with a max RMS on-state current of 8A and repetitive peak off-state voltage of 800V. It is used in applications requiring AC switching such as motor speed control, lighting dimming, and heating control due to its isolated case connection and UL recognized reference standard.
BT136-600E,127
BT136-600E,127 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a trigger device type of 4 quadrant logic level TRIAC and operates at a max temperature of 125°C. Ideal for applications requiring precise AC power control in various electronic circuits.
MAC4DCNT4
MAC4DCNT4 by Onsemi is a single TRIAC with 500mA DC gate trigger current and 4A RMS on-state current. It operates b/w -40 to 125 °C, suitable for AC power control applications in various industries. The package is surface mountable with GULL WING terminals and a max off-state voltage of 800V.
BTB16-800CWRG
BTB16-800CWRG by STMicroelectronics is a single TRIAC with 16A RMS on-state current and 800V repetitive peak off-state voltage. It operates b/w -40 to 125°C, ideal for snubberless applications requiring up to 35mA gate trigger current. The package style is flange mount with through-hole terminals, suitable for various AC control systems.
BTA16-600BWRG
BTA16-600BWRG by STMicroelectronics is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It is used in snubberless applications, has a max operating temperature of 125°C, and is UL recognized for various AC control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTA26-600BRG
BTA26-600BRG by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage and 25A max RMS on-state current. It has a 50mA max DC gate trigger current and operates b/w -40°C to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BTA26-600BWRG
BTA26-600BWRG by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It is used as a snubberless TRIAC in applications requiring up to 125°C operating temperature, such as in UL recognized systems for AC power control.
BTA26-800BWRG
BTA26-800BWRG by STMicroelectronics is a single TRIAC with 3 terminals, capable of handling up to 25A RMS current and 800V repetitive peak off-state voltage. It operates b/w -40°C to 125°C, making it suitable for various snubberless TRIAC applications. The device features a max DC gate trigger current of 50mA and a max leakage current of 3mA.
BTA25-600BW
BTA25-600BW by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, ideal for snubberless TRIAC applications. Featuring a max DC gate trigger current of 50mA, it is UL recognized and has an isolated case connection.
Continental Device India
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
BTA25-600B
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
STMicroelectronics BTA25-600B is a 25A TRIAC with 600V off-state voltage, suitable for AC applications. Features include 50mA gate trigger current, -40 to 125°C operating temp range, and UL recognition. Ideal for controlling power in various electronic devices.
BTA26-800BRG
BTA26-800BRG by STMicroelectronics is a TRIAC with 3 terminals, rated for 25A RMS current and 800V off-state voltage. It has a max operating temperature of 125°C and trigger voltage of 1.5V, making it suitable for AC power control applications requiring high reliability and performance in industrial settings.
BTA26-600BW
BTA26-600BW by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It is used as a snubberless TRIAC in applications requiring up to 125°C operating temperature, such as AC power control circuits.
BTA26-800CWRG
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA204X-600C
Philips Semiconductors
TRIAC; Surface Mount: NO; Maximum Holding Current: 15 mA; Maximum RMS On-state Current: 4 A; Maximum On-state Voltage: 1.7 V; Repetitive Peak Off-state Voltage: 600 V;
Ween Semiconductors
BTA204X-600C,127
BTA26-800BW
BTA26-800BW by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage, 25A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring snubberless TRIACs for AC power control at temperatures ranging from -40°C to 125°C.
BTA26600B
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA24-800BWRG
STMicroelectronics' BTA24-800BWRG is a single TRIAC with 800V peak off-state voltage, 25A max RMS current, and 1.3V gate trigger voltage. Ideal for AC power control in appliances, lighting systems, and industrial equipment due to its snubberless design and UL recognition.
BTA206X-800CT,127
TRIAC; Surface Mount: NO; Maximum RMS On-state Current: 6 A; Moisture Sensitivity Level (MSL): 1; Maximum Holding Current: 35 mA; Repetitive Peak Off-state Voltage: 800 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved