Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; No. of Words Code: 128M;
Median Price
$1.798
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.240
1k+ parts
$2.010
10k+ parts
$1.890
Verical
$1.357
Nova Conductors
$2.452
Chip Stock
Cyclops Electronics Ltd
Vyrian
Atlantic Semiconductor
Classic Components Corporation
Bristol Electronics
LIBRA Elektronik GmbH
Inventory MP
PC Components Company LLC
Infinite Electronics LLP
Prism Electronics
Electronics Depot
Sunrise Surplus Inc.
Semicontronic
$1.150
$1.121
$1.116
Component Stockers USA
$1.340
Continental Prestige Electronics
$2.403
Argo Parts USA
Netroflash
$2.329
$2.280
Advanced Electronics
$3.280
$2.985
$2.690
Aztec Data Supply Inc.
$3.500
Corohmni
$5.083
AZTECH Wire
$5.665
Metaverse IC Inc.
RC Electronics
$2.500
$2.210
QUARKTWIN TECHNOLOGY LTD
A-Z Elektronik GmbH
Kepictronics
Perfect Parts
GreenTree Electronics
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
S.R.D Solutions
ChipstoGo Electronic ltd
Flash Memory S34ML01G100TFI000 attributes and parameters. Explore more Flash Memory devices from Spansion
Maximum Access Time:
Command User Interface:
Data Polling:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Sectors/Size:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Page Size (words):
Parallel or Serial:
Peak Reflow Temperature (C):
Power Supplies (V):
Programming Voltage (V):
Qualification:
Ready or Busy:
Maximum Seated Height:
Sector Size (Words):
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Toggle Bit:
Type:
Width:
S34ML01G100TFI000 Memory ICs trade compliance attributes, and parameters.
ECCN
3A991.B.1.A
ECCN Governance
EAR
HTS
8542.32.00.51
SB
8542.32.00.50
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
BAV99
Frontier Electronics
Microsemi
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Panjit International
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
S29WS128P0SBFW000
Spansion
FLASH; Temperature Grade: OTHER; No. of Terminals: 84; Package Code: VFBGA; Package Shape: RECTANGULAR; Qualification: Not Qualified;
MT29F1G08ABADAWP:D
Micron Technology
Micron Technology's MT29F1G08ABADAWP:D is a 3.3V SLC NAND Flash Memory with 128Mx8 organization, operating in asynchronous mode. It features a page size of 2K words and sector size of 128K words, suitable for commercial applications requiring fast access times and low standby current.
S29JL032J70TFI010
Cypress Semiconductor
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSSOP; Package Shape: RECTANGULAR; Maximum Standby Current: .000005 Amp;
SST39SF010A-70-4C-NHE
Silicon Storage Technology
FLASH; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Toggle Bit: YES;
S29GL01GS10DHI010
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: LBGA; Package Shape: SQUARE; Page Size (words): 16;
S26KS512SDPBHM020
Infineon Technologies
Infineon's S26KS512SDPBHM020 is a 64MX8 Flash Memory with 536870912 bit memory density. Operating at 1.8V, it offers synchronous mode and parallel interface for fast access time of 96ns. Ideal for automotive applications due to AEC-Q100 screening and TS16949 certification.
BMXRMS008MP
Schneider Electric Sa
FLASH CARD;
W25Q80DVSNIG
Winbond Electronics
W25Q80DVSNIG by Winbond Electronics is a 1MX8 NOR type flash memory with 104 MHz clock frequency. It operates at 3V, has 100000 write/erase cycles endurance, and uses SPI serial bus. Ideal for applications requiring high-speed data storage in compact devices like IoT sensors and wearables.
SST26VF016B-104I/SN
Microchip Technology
SST26VF016B-104I/SN by Microchip: 16MX1 NOR Flash Memory with 104 MHz clock freq. Ideal for industrial applications, offers 100000 Write/Erase cycles, SPI serial bus type.
MX25LM51245GXDI00
Macronix
Macronix's MX25LM51245GXDI00 is a 64MX8 Flash Memory with 67108864 words. It operates at 133 MHz clock frequency, has a memory density of 536870912 bits, and uses serial communication. Ideal for industrial applications requiring reliable data storage in a compact package.
AT45DB321E-SHFHC-T
Adesto Technologies
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SST25VF080B-50-4I-S2AF-T
SST25VF080B-50-4I-S2AF-T by Microchip Technology is a NOR type Flash Memory with 8Mx1 organization, SPI serial bus type, and 50MHz clock frequency. It operates at -40 to 85°C and has 100k write/erase cycles endurance. Ideal for industrial applications requiring high-speed data storage in compact devices.
SST39VF040-70-4I-WHE
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: TSSOP; Package Shape: RECTANGULAR; Length: 12.4 mm;
S29GL256P90TFIR20
S29GL256P90TFIR20 by Infineon Technologies is a 256MX1 NOR flash memory with 3.3V supply voltage, operating at -40 to 85°C. It features a small outline package with 56 terminals and offers fast access time of 90ns. Ideal for industrial applications requiring high-density parallel flash memory solutions.
AT45DB081D-SSU
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
M25P40-VMN6PBA
M25P40-VMN6PBA by Micron Technology is a NOR type Flash Memory with 512Kx8 organization, SPI serial bus type, and 50 MHz clock frequency. It is used in industrial applications for storing data securely with 100000 write/erase cycles endurance.
SST25VF016B-50-4I-S2AF
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE; Moisture Sensitivity Level (MSL): 2;
AT45DB041E-SHN-B
Dialog Semiconductor
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Data Retention Time: 20;
S29GL128S90TFI020
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 56; Package Code: TSSOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH;
N25Q032A11EF640E
Micron Technology's N25Q032A11EF640E is a 32Mb Flash Memory with 1.8V supply voltage, operating at up to 108MHz clock frequency. Ideal for industrial applications, it offers synchronous operation in a small outline package with 1Mx32 organization.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
S34ML02G100TFI000
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Parallel or Serial: PARALLEL;
Skyhigh Memory
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Width: 12 mm;
Cypress Semiconductor's S34ML02G100TFI000 is a 256MX8 SLC NAND flash memory with 2K sectors and 128K word sector size. Operating at 3.3V, it offers fast access time of 25ns for industrial applications. With a compact form factor and low standby current, it's ideal for embedded systems requiring high-speed data storage.
S34ML01G200TFI000
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Operating Mode: ASYNCHRONOUS;
Cypress Semiconductor's S34ML01G200TFI000 is a 128Mx8 SLC NAND flash memory with 1K sectors and 2K word page size. Operating at 3.3V, it offers fast access time of 25ns and low standby current of 0.00005Amp. Ideal for industrial applications requiring high memory density and reliable performance in a small outline package.
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; No. of Words: 134217728 words;
S34ML01G100TFI000
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 2.7 V;
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Power Supplies (V): 3/3.3;
S34ML04G100TFI000
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Memory Density: 4294967296 bit;
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
Cypress Semiconductor's S34ML04G100TFI000 is a 512MX8 SLC NAND flash memory with 4K sectors and 2K page size. Operating at 3.3V, it offers fast access time of 25ns and low standby current of 0.00005A. Ideal for industrial applications requiring reliable, high-density memory with parallel interface and asynchronous operation.
S34MS16G202BHI000
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 63; Package Code: TFBGA; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 1.7 V;
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 63; Package Code: TFBGA; Package Shape: RECTANGULAR; Maximum Supply Voltage (Vsup): 1.95 V;
S34ML02G100TFI003
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Maximum Seated Height: 1.2 mm;
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Terminal Pitch: .5 mm;
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Technology: CMOS;
S34ML16G202BHI000
Cypress Semiconductor's S34ML16G202BHI000 is a 16Gb Flash Memory with 2GX8 organization, operating at 3.3V. It features a thin profile grid array package and operates in industrial temperature range. Ideal for applications requiring high-density memory storage in compact devices.
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 63; Package Code: TFBGA; Package Shape: RECTANGULAR; Type: SLC NAND TYPE;
S34ML02G200BHI000
Cypress Semiconductor's S34ML02G200BHI000 is a 256MX8 SLC NAND flash memory with 2K sectors. Operating at 3.3V, it offers fast access time of 25ns and supports parallel interface. Ideal for industrial applications requiring high memory density and low standby current consumption.
S34ML01G100TFV013
FLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: TSOP1; Package Shape: RECTANGULAR; Type: SLC NAND TYPE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved