Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260;
Median Price
$1.390
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$0.889
100+ parts
$0.656
1k+ parts
$0.635
10k+ parts
$0.634
Arrow
$0.943
-
Newark
$1.240
$1.030
$0.932
Chip1Stop
$1.480
Element14
$1.530
Mouser Electronics
$3.340
$1.760
$1.200
$1.110
Verical
Rochester
$1.150
Digiode
$0.896
Nova Conductors
$1.440
Vyrian
LIBRA Elektronik GmbH
Ampacity Inc.
$0.800
Corphita
$0.849
Argo Parts USA
Continental Prestige Electronics
$1.411
AZTECH Wire
$17.380
Kepictronics
Netroflash
$1.368
$1.339
Other Function Interface ICs SI8711CC-B-IP attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
Peak Reflow Temperature (C):
SI8711CC-B-IP Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Si87yy Datasheet/Cert Update 18/Dec/2017
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Daco Semiconductor
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Yangzhou Yangjie Electronics
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SI8662BD-B-IS
Silicon Labs
Silicon Labs' SI8662BD-B-IS is a digital isolator with 16 terminals, operating voltage range of 2.375V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for high-temperature environments up to 125°C.
ADUM5401ARWZ
Analog Devices
ADUM5401ARWZ by Analog Devices is a small outline interface IC with 16 terminals. It operates at a supply voltage range of 3V to 5.5V and has an industrial temperature grade of -40°C to +105°C. This IC is commonly used in various applications requiring reliable signal isolation and interface circuitry.
SI8640BB-B-IS1R
SI8640BB-B-IS1R by Silicon Labs is a digital isolator with 4 functions, operating b/w -40 to 125°C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring signal isolation in compact spaces.
ISO7721FQDRQ1
ISO7721FQDRQ1 by Texas Instruments is a CMOS digital isolator with 2 channels, AEC-Q100 screening level, and 2.25-5.5V supply voltage range. Ideal for automotive applications, it features a small outline package style, dual terminal position, and operates b/w -40 to 125°C temperatures.
SI8663BD-B-ISR
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
SI8642BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISO6721QDWVRQ1
ISO6721QDWVRQ1 by Texas Instruments is an AEC-Q100 compliant interface IC with 2 functions. It operates b/w -40 to 125 °C and has a supply voltage range of 1.71V to 5.5V, making it ideal for automotive applications requiring high temperature tolerance and dual terminal positions.
CY8CMBR3108-LQXIT
Cypress Semiconductor
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
SN6505AQDBVTQ1
SN6505AQDBVTQ1 by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -40 to 125 °C and supports a max output current of 1.5 A. Designed for automotive applications, it has a terminal pitch of 0.95 mm and is AEC-Q100 compliant.
ADUM1300ARWZ-RL
ADUM1300ARWZ-RL by Analog Devices is a 16-terminal IC with 3 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages from 2.7V to 5.5V, making it ideal for industrial applications requiring reliable interface circuits in compact spaces.
ISO7763FDBQ
ISO7763FDBQ by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and uses CMOS technology. This small outline interface circuit is ideal for military-grade applications requiring high reliability in harsh environments.
ADUM5402CRWZ
ADUM5402CRWZ by Analog Devices is a 16-terminal interface IC with supply voltage range of 3-5.5V, operating temperature from -40 to 105°C. It is used in industrial applications requiring small outline package and dual terminal position for reliable signal isolation.
LTC6957IDD-2#TRPBF
Linear Technology
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE;
ADUM1201WTRZ-RL7
ADUM1201WTRZ-RL7 by Analog Devices is an 8-terminal IC with dual functions, operating at -40 to 125 °C. It has a supply voltage range of 3-5.5 V and is AEC-Q100 certified for automotive applications. This small outline package IC features CMOS technology, matte tin finish, and gull wing terminals for interface circuit designs.
PCA9548APWR
PCA9548APWR by Texas Instruments is an 8-channel interface IC with a supply voltage range of 2.3V to 5.5V, suitable for industrial applications. It features a small outline package style, dual terminal position, and nickel/palladium/gold finish for robust performance in temperatures ranging from -40°C to 85°C. The device is surface mountable and has a compact rectangular shape ideal for space-constrained designs.
SI8600AC-B-IS
SI8600AC-B-IS by Silicon Labs is an 8-terminal interface IC with a supply voltage range of 3-5.5V, suitable for automotive applications. It operates b/w -40 to 125°C and features a small outline package style for surface mount assembly. The IC is AEC-Q100 compliant and has a terminal pitch of 1.27mm, making it ideal for compact designs in automotive electronics.
ISO7220ADR
ISO7220ADR by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 3.3V to 5V, it comes in a small outline package ideal for surface mount assembly.
TXB0108RGYR
TXB0108RGYR by Texas Instruments is an 8-bit interface IC with a max supply voltage of 3.6V and operating temperature range of -40 to 85°C. It features a 20-terminal chip carrier package suitable for industrial applications, offering 3-STATE output characteristics and low supply current of 0.01mA. Ideal for various function interface requirements in electronic systems.
ADUM1250ARZ-RL7
ADUM1250ARZ-RL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating from -40°C to 105°C. It features a small outline package and CMOS technology, suitable for industrial applications requiring interface circuitry in compact designs.
PTN5110HQZ
NXP Semiconductors
PTN5110HQZ by NXP Semiconductors is a 16-terminal interface IC with a supply voltage range of 2.7V to 5.5V, operating temperature from -40°C to 85°C. It features a square package style and is suitable for applications requiring other function interface ICs in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8751AB-ISR
INTERFACE CIRCUIT; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 2A;
INTERFACE CIRCUIT; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: MATTE TIN;
SI8710CC-B-IS
SI8751AB-IS
INTERFACE CIRCUIT; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 2A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; JESD-609 Code: e3; Peak Reflow Temperature (C): NOT SPECIFIED;
INTERFACE CIRCUIT; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2A;
SI8710CC-B-ISR
INTERFACE CIRCUIT;
SI8710AC-B-ISR
SI8751AB-ASR
INTERFACE CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
SI8717BC-A-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8712BC-B-IS
SI8712BC-B-ISR
SI8751AB-AS
SI8715BC-A-IP
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 4.19 mm;
SI8710AD-B-IS
SI8710CD-B-IS
SI8711AC-B-IS
SI8736BC-ISR
INTERFACE CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
SI8711CC-AS
INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved