Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: MATTE TIN;
Median Price
$1.728
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.020
100+ parts
$1.860
1k+ parts
$1.729
10k+ parts
-
Mouser Electronics
$1.870
$1.690
$1.560
Chip1Stop
$1.626
Arrow
Verical
Nova Conductors
$1.697
Digiode
$3.306
Flip Electronics
Vyrian
NexGen Digital
ComSIT Distribution GmbH
Bristol Electronics
Ampacity Inc.
$1.380
Semicontronic
$1.346
$1.339
Continental Prestige Electronics
$1.664
Netroflash
Argo Parts USA
Corphita
$3.132
Aztec Data Supply Inc.
$9.300
Corohmni
$10.240
Other Function Interface ICs SI8751AB-ISR attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
SI8751AB-ISR Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Meritek Electronics
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Comset Semiconductors
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
Diotec Semiconductor Ag
ISO7842DWW
ISO7842DWW by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and MILITARY temperature grade. It operates b/w -55 to 125 °C with a supply voltage range of 2.25-5.5 V. Ideal for applications requiring high reliability in harsh environments.
PCA9306DCTTE4
PCA9306DCTTE4 by Texas Instruments is an interface IC with 2 functions, operating at a supply voltage range of 1.8V to 5.5V. It features open-drain output characteristics and a max delay of 1.3ns, suitable for industrial applications requiring level shifting in compact designs. The package style is small outline, low profile, shrink pitch with dual terminal position and nickel/palladium/gold finish.
LTC6820IUD#PBF
Linear Technology
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
MAX4896ETP
Maxim Integrated
MAX4896ETP by Maxim Integrated is a BICMOS technology interface IC with 8-bit driver. It operates b/w -40 to 85 °C, with supply voltage range of 2.7-5.5 V. Ideal for industrial applications requiring low output current and quad terminal position in a square chip carrier package.
PCA9306DCTR
PCA9306DCTR by Texas Instruments is a 2-function interface IC with max supply voltage of 5.5V and min of 1.8V. It operates in industrial temperature range, has 3-state output characteristics, and is ideal for applications requiring true output polarity control in a small outline package.
ADUM7441ARQZ-RL7
Analog Devices
ADUM7441ARQZ-RL7 by Analog Devices is a CMOS interface IC with 16 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 3V to 5.5V and is designed for industrial applications requiring small outline packages and surface mount technology.
HMC677LP5ETR
HMC677LP5ETR by Analog Devices is a BICMOS interface IC with a package size of 5x5mm. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 5.5V. This IC is commonly used in industrial applications requiring an interface circuit with very thin profile packaging.
TUSB320IRWBR
TUSB320IRWBR by Texas Instruments is a 12-terminal interface IC with a supply voltage range of 2.7V to 5V. It operates in industrial temperature grades from -40°C to 85°C, making it suitable for various applications requiring a very thin profile chip carrier package style. The terminal finish is nickel palladium gold, and it has a moisture sensitivity level of 2.
ADUM1201CRZ-RL7
ADUM1201CRZ-RL7 by Analog Devices is a dual-function interface IC with a supply voltage range of 2.7V to 5.5V, suitable for industrial applications. It comes in a small outline package with 8 terminals and operates b/w -40°C to 105°C. The technology used is CMOS, making it ideal for various interface circuit requirements.
SN6501DBVR
SN6501DBVR by Texas Instruments is a small outline interface IC with 5 terminals and a max supply voltage of 5.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a peak output current of 0.5A, this CMOS technology IC is ideal for various other function interface requirements.
PCA9306DTR2G
PCA9306DTR2G by Onsemi is an 8-terminal IC with a temp range of -55 to 125°C. It features nickel palladium gold finish, gull wing terminals, and small outline package style. Ideal for military-grade applications requiring interface circuit functionality in compact spaces.
PCA9615DPJ
NXP Semiconductors
PCA9615DPJ by NXP Semiconductors is a small outline, thin profile interface IC with 10 terminals. It operates b/w -40 to 85°C, with supply voltage ranging from 2.3V to 5.5V. Ideal for industrial applications requiring reliable communication at peak reflow temperature of 260°C.
MAX4896ETP+
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
ADUM1401CRWZ
ADUM1401CRWZ by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages and dual terminal positions.
ISO7240CFDWRG4
ISO7240CFDWRG4 by Texas Instruments is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 3.15-3.6 V and is suitable for automotive applications due to its nickel palladium gold finish and small outline package style.
ADG3304BRUZ
ADG3304BRUZ by Analog Devices is a CMOS interface IC with 14 terminals and a max supply voltage of 5.5V. It operates in industrial temperature range (-40 to 85 °C) and is suitable for applications requiring small outline, thin profile packages like signal routing and switching circuits.
EL6203CWZ-T7
Intersil
INTERFACE CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
ISO7741FQDBQQ1
ISO7741FQDBQQ1 by Texas Instruments is a CMOS interface IC with 4 functions, suitable for automotive applications. It operates b/w -40 to 125 °C and has a supply voltage range of 2.25-5.5 V. This small outline IC with dual terminals is AEC-Q100 compliant and ideal for use in harsh environments.
SI8600AC-B-ISR
Silicon Labs
SI8600AC-B-ISR by Silicon Labs is an 8-terminal interface IC with a supply voltage range of 3V to 5.5V, operating b/w -40°C to 125°C. Its small outline package and gull wing terminals make it suitable for various applications requiring precise interface circuitry in compact spaces.
TFBS4711-TR3
Vishay Intertechnology
TFBS4711-TR3 by Vishay Intertechnology is a CMOS interface IC with 6 terminals. It operates b/w -25 to 85 °C and has a supply voltage range of 2.4V to 5.5V. With a rectangular package style, it is suitable for applications requiring microelectronic assembly in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8751AB-ISR
Skyworks Solutions
INTERFACE CIRCUIT; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 2A;
SI8710CC-B-IS
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260;
SI8751AB-IS
INTERFACE CIRCUIT; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 2A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; JESD-609 Code: e3; Peak Reflow Temperature (C): NOT SPECIFIED;
INTERFACE CIRCUIT; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2A;
SI8710CC-B-ISR
INTERFACE CIRCUIT;
SI8710AC-B-ISR
SI8751AB-ASR
INTERFACE CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
SI8717BC-A-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8712BC-B-IS
SI8712BC-B-ISR
SI8751AB-AS
SI8715BC-A-IP
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 4.19 mm;
SI8710AD-B-IS
SI8710CD-B-IS
SI8711AC-B-IS
SI8711CC-B-IP
SI8736BC-ISR
INTERFACE CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
SI8752AB-AS
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved