Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8441AB-D-IS by Silicon Labs is a 16-terminal interface IC with CMOS technology. It features a small outline package, Gull Wing terminals, and automotive temperature grade. Ideal for applications requiring surface mount rectangular packages with dual terminal positions.
Median Price
$2.750
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$1.680
100+ parts
$1.380
1k+ parts
$1.290
10k+ parts
-
Newark
$1.960
$1.670
$1.620
Element14
$2.610
Chip1Stop
$3.549
$2.570
$2.541
Arrow
$3.618
$2.323
$2.315
DigiKey
$3.990
$2.637
$2.293
$2.162
Verical
Vyrian
Digiode
$3.190
Chip Stock
Connector Distribution Corp
Right Parts Inc.
Bristol Electronics
Nova Conductors
ComSIT Distribution GmbH
Ampacity Inc.
$2.160
Component Stockers USA
$2.620
$2.220
$1.810
Corphita
$3.022
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Aranea Global
Metaverse IC Inc.
S.R.D Solutions
Kepictronics
PLASTIC/EPOXY package body material provides high durability and resistance to various environmental conditions, making this product suitable for automotive applications.
Surface mount capability allows for easy and efficient assembly onto circuit boards, reducing production time and cost.
Rectangular package shape offers a compact design, maximizing space efficiency in electronic systems.
With 16 terminals, this product can support multiple connection points, providing versatility in interfacing within electronic circuits.
Small outline package style saves space on circuit boards, enabling denser and more streamlined electronic designs.
Low seated height allows for a slim profile, ideal for applications where space is limited or where a sleek design is desired.
Narrow width facilitates compact integration within electronic systems, enabling space-saving solutions.
Moderate length provides a balanced form factor, ensuring compatibility with various circuit board layouts.
Automotive temperature grade ensures reliable performance in harsh temperature environments, making this product suitable for automotive applications.
CMOS technology offers low power consumption and high noise immunity, enhancing the efficiency and reliability of the interface circuit.
Gull wing terminal form facilitates easy soldering onto circuit boards, ensuring secure connections for improved reliability.
With a fine terminal pitch, this product allows for precise and compact placement of terminals, optimizing space utilization on circuit boards.
Designed specifically for interface circuit applications, this product offers high functionality and performance in facilitating communication between different electronic components.
Other Function Interface ICs SI8441AB-D-IS attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI8441AB-D-IS Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Zetex Plc
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Kec
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Thinking Electronic Industrial
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
Semicoa
MAX3001EEUP
Maxim Integrated
MAX3001EEUP by Maxim Integrated is a BICMOS technology interface IC with 20 terminals. It operates b/w -40 to 85 °C and supports supply voltages of 1.2-5.5 V, making it ideal for industrial applications requiring precise signal processing in compact designs.
ISO7762DBQ
ISO7762DBQ by Texas Instruments is a CMOS interface IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and comes in a small outline package suitable for military-grade applications. The device features dual terminals with nickel/palladium/gold finish, making it ideal for various other function interface circuits.
SI8641BB-B-IS1R
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8645BA-B-IU
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
FXMAR2102L8X
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VQCCN; Package Shape: SQUARE;
TXS0108ENMER
TXS0108ENMER by Texas Instruments is an 8-bit interface IC with a supply voltage range of 1.4V to 3.6V and operating temperature from -40°C to 85°C. It features a 3-STATE output characteristic, very thin profile package style, and a grid array package shape. Ideal for industrial applications requiring precise signal interfacing in compact spaces.
TFBS4711-TR1
Vishay Intertechnology
TFBS4711-TR1 by Vishay Intertechnology is a CMOS interface IC with 6 terminals, operating voltage range of 2.4V to 5.5V, and package size of 6x3mm. It is suitable for applications requiring an interface circuit with a max temperature of 85°C and gold terminal finish.
XISO7021FDR
XISO7021FDR by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 1.71V to 1.89V, suitable for military-grade applications. It features CMOS technology, operates b/w -55°C to 125°C, and has a small outline rectangular package style ideal for surface mount assembly.
MAX4896ATP+T
Analog Devices
MAX4896ATP+T by Analog Devices is a BICMOS technology interface IC with 8-bit driver. It operates b/w -40 to 85°C, with supply voltage range of 2.7-5.5V. Suitable for industrial applications requiring very thin profile and low output current (0.0001A).
ISO7240MDWR
ISO7240MDWR by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for surface mount applications. With nickel palladium gold terminal finish, it's ideal for various function interface IC applications.
SI8400AB-B-IS
Silicon Labs
SI8400AB-B-IS by Silicon Labs is an 8-terminal interface IC with a supply voltage range of 3-5.5V, suitable for automotive applications. It features a small outline package style, gull wing terminal form, and operates in temperatures from -40 to 125°C. Ideal for surface mount assembly with a rectangular shape and compact dimensions of 4.9mm x 3.9mm x 1.75mm.
ISOW7842FDWER
ISOW7842FDWER by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It has a supply voltage range of 3-5.5V and comes in a small outline package style. Ideal for automotive applications requiring high temperature tolerance and signal isolation.
PCA9306DCUTE4
PCA9306DCUTE4 by Texas Instruments is an interface IC with 2 functions. It operates b/w 1.2V to 5.5V, suitable for industrial applications. With a small outline and thin profile, it has a terminal pitch of 0.5mm and can withstand temperatures from -40°C to 85°C.
MAX3378EEUD+T
MAX3378EEUD+T by Analog Devices is a 4-function interface IC with 14 terminals, operating at -40 to 85°C. It has a supply voltage range of 1.2-5.5V and uses BICMOS technology. Ideal for industrial applications requiring small outline, thin profile packages with shrink pitch design.
SI8641BD-B-IS2
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP16,.4;
ISO7741QDWWQ1
ISO7741QDWWQ1 by Texas Instruments is a 4-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 2.25-5.5V, it comes in a small outline package with dual terminals and nickel/palladium/gold finish.
SI8602AC-B-ISR
SI8602AC-B-ISR by Silicon Labs is an 8-terminal interface IC with a supply voltage range of 3V to 5.5V, operating b/w -40°C to 125°C. Its small outline package makes it suitable for various applications requiring dual terminal positions and Gull Wing form factor.
ISO7741FQDWQ1
ISO7741FQDWQ1 by Texas Instruments is a CMOS interface IC with 4 functions, suitable for automotive applications. It operates b/w -40 to 125°C, with supply voltage range of 2.25-5.5V. This small outline IC has 16 terminals and meets AEC-Q100 standards for reliability in harsh environments.
TXS0102DCTR
TXS0102DCTR by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C and supports supply voltages of 1.65-5.5 V, making it ideal for industrial applications requiring low-profile, small-outline packages in surface-mount configurations.
HMC677LP5ETR
HMC677LP5ETR by Analog Devices is a BICMOS interface IC with a package size of 5x5mm. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 5.5V. This IC is commonly used in industrial applications requiring an interface circuit with very thin profile packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8422AB-D-ISR
SI8422AB-D-ISR by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40°C to 125°C, with supply voltage ranging from 2.7V to 5.5V. This small outline package is ideal for applications requiring AEC-Q100 screening and CMOS technology.
SI8422AB-D-IS
SI8422AB-D-IS by Silicon Labs is a dual-function interface IC with 8 terminals. It operates b/w -40 to 125 °C and supports supply voltages from 2.7V to 5.5V. This small outline package is ideal for AEC-Q100 applications in automotive electronics.
SI8422BB-D-IS
SI8422BB-D-IS by Silicon Labs is an 8-terminal IC with dual terminal position, operating at -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is AEC-Q100 screened. This small outline rectangular package interface circuit is ideal for automotive applications.
SI8420BB-D-IS
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SI8423BB-D-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 2A;
SI8442AB-D-IS1R
SI8442AB-D-IS1R by Silicon Labs is a 16-terminal IC with 4 functions, operating b/w -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and AEC-Q100 screening level. Ideal for interface circuits in automotive applications due to its compact size and CMOS technology.
SI8440BB-D-IS
SI8440BB-D-IS by Silicon Labs is a 16-terminal interface IC with CMOS technology. Its small outline package measures 7.5mm in width and 10.3mm in length, suitable for automotive applications due to its gull wing terminals and dual terminal position.
SI8421AD-D-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8442AB-D-IS
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SI8420BB-D-ISR
SI8420BB-D-ISR by Silicon Labs is a CMOS interface IC with 8 terminals in a small outline package. It is surface mountable, suitable for automotive applications, and has a peak reflow temperature of 260°C. Ideal for various function interface needs due to its compact size and dual terminal position.
SI8441AB-D-IS1R
SI8441AB-D-IS1R by Silicon Labs is a 16-terminal IC with 4 functions, operating at -40 to 125°C. It has a supply voltage range of 2.7-5.5V and AEC-Q100 screening, suitable for automotive interface circuit applications. The small outline package measures 9.9x3.9mm with gull wing terminals and CMOS technology for robust performance in automotive environments.
SI8440BB-D-IS1R
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8431AB-D-IS
SI8440BB-D-IS1
SI8441BB-D-IS
SI8441BB-D-IS1
SI8441BB-D-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SI8431AB-D-IS1R
SI8431AB-D-IS1R by Silicon Labs is a digital isolator with 16 terminals, operating voltage range of 2.7V to 5.5V, and temperature range from -40°C to 125°C. It features CMOS technology, GULL WING terminal form, and small outline package style. Ideal for applications requiring interface isolation in compact designs.
SI8431BB-D-IS1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved