Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8231AD-D-ISR by Silicon Labs is a MOSFET Gate Driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 24 V and nominal output peak current limit of 0.5 A. Ideal for applications requiring high side drivers in compact spaces.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
Ampacity Inc.
$4.500
AZTECH Wire
$6.425
Advanced Electronics
$17.275
$15.720
$14.166
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Corphita
The use of plastic/epoxy as the package body material makes the product lightweight and durable.
Being surface mountable allows for easy and convenient installation on circuit boards.
The maximum supply voltage of 5.5 V ensures safe operation within specified limits.
Having 2 functions provides versatility and flexibility in controlling MOSFETs.
The rectangular package shape allows for efficient use of space on the circuit board.
With a maximum supply voltage of 24 V, the driver can handle a wide range of power supply inputs.
Support for multiple power supply voltages (3/5 and 12/15 V) adds to the flexibility of the product.
Having 16 terminals allows for easy interfacing with other components and circuits.
The small outline package style helps in space-saving and efficient board design.
The minimum supply voltage of 6.5 V ensures proper operation even under low voltage conditions.
Support for a minimum supply voltage of 4.5 V guarantees operation in a wide range of voltage levels.
The high maximum operating temperature of 125°C allows for reliable operation even in harsh environments.
The low minimum operating temperature of -40°C ensures performance in extreme cold conditions.
Dual terminal positions provide redundancy and flexibility in connection options.
The low maximum seated height of 2.65 mm helps in achieving a compact overall system design.
The narrow width of 7.5 mm allows for efficient space utilization on the PCB.
The inclusion of a high side driver enhances the overall performance of the MOSFET gate driver.
The compact length of 10.3 mm helps in fitting the driver into tight spaces on the board.
The gull wing terminal form ensures secure and reliable connections to the circuit.
The nominal supply voltage of 5 V makes the product compatible with standard power sources.
The fast turn-on time of 0.045 microseconds allows for quick switching of MOSFETs.
The standard terminal pitch of 1.27 mm facilitates easy connection to the circuit board.
Support for a nominal supply voltage of 12 V enables compatibility with various power systems.
The nominal output peak current limit of 0.5 A provides protection to the driver and connected components.
The use of a half bridge based IGBT/MOSFET driver interface IC type ensures reliable and efficient operation in driving power transistors.
The fast turn-off time of 0.045 microseconds complements the quick turn-on time for precise control of MOSFET switching.
MOSFET Gate Drivers SI8231AD-D-ISR attributes and parameters. Explore more MOSFET Gate Drivers devices from Silicon Labs
High Side Driver:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
SI8231AD-D-ISR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
World Products
Digitron Semiconductors
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
IR11682STRPBF
Infineon Technologies
IR11682STRPBF by Infineon Technologies is a MOSFET gate driver with 15V power supplies, 18V max supply voltage, and 4A nominal output peak current limit. It is used in applications requiring high side drivers and interface IC type half bridge based MOSFET drivers.
UCC27282QDRCRQ1
Texas Instruments
UCC27282QDRCRQ1 by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade conditions with an operating temperature range from -40°C to 125°C and supports a supply voltage range of 5.5V to 16V. Ideal for applications requiring fast turn-on/off times such as automotive electronics and power management systems.
1EDI60N12AFXUMA1
1EDI60N12AFXUMA1 by Infineon is a MOSFET gate driver with 8 terminals, operating voltage range of 3.1V to 17V, and turn-on/off times of 0.142/0.15 us. Ideal for automotive applications due to its small outline package style and dual terminal position.
UCC23513BQDWYRQ1
UCC23513BQDWYRQ1 by Texas Instruments is a MOSFET gate driver with 6 terminals, operating temperature range of -40 to 125 °C. It has a max supply voltage of 33 V and output current of 4.5 A, suitable for automotive applications due to its AEC-Q100 screening level. The driver features push-pull output characteristics and a small outline package style, making it ideal for high side driving in automotive systems.
TC4468COE
Teledyne Components
AND GATE BASED MOSFET DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Shape: RECTANGULAR; Minimum Operating Temperature: 0 Cel;
LM5106MMX/NOPB
LM5106MMX/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels and a max output current of 1.8A, suitable for automotive applications. It operates on a nominal voltage of 12V and has a temperature range from -40 to 125°C. The package style is small outline, thin profile, shrink pitch, making it ideal for compact designs.
TC4431COA
Microchip Technology
TC4431COA by Microchip Technology is a MOSFET gate driver with a max supply voltage of 30V and power supplies ranging from 4.5V to 30V. It features an inverted output polarity, Schmitt trigger input characteristics, and turn-on/off times of 0.17us, making it ideal for commercial applications requiring precise control over MOSFET switching operations.
MIC5011YM
MIC5011YM by Microchip Technology is a MOSFET Gate Driver with 8 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 4.75-32V and features high side driver functionality. This industrial-grade CMOS technology IC is ideal for applications requiring fast turn-on/off times in compact designs.
LTC7003MPMSE#TRPBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Turn-on Time: .07 us;
LM5105SD/NOPB
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
IXDD604SIA
Ixys Integrated Circuits Division
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LTC4372HMS8#TRPBF
Analog Devices
BUFFER OR INVERTER BASED MOSFET DRIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
LTC7000HMSE#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
LTC7003EMSE#PBF
LTC7003EMSE#PBF by Analog Devices is a MOSFET gate driver with a max supply voltage of 60V. It has a small outline, heat sink package style and is suitable for automotive applications. Its turn-on and turn-off time is 0.07us, making it ideal for high-speed switching.
LM5050MKX-1
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
L6388ED013TR
STMicroelectronics L6388ED013TR is a MOSFET gate driver with 17V max supply voltage, 15V nominal voltage, and 0.65A output peak current limit. It features BCD technology, 0.3us turn-on time, and 0.22us turn-off time. Ideal for half-bridge based MOSFET driver applications due to its small outline package style and high side driver capability.
UCC21540AQDWKRQ1
UCC21540AQDWKRQ1 by Texas Instruments is a MOSFET gate driver with 2 channels, 6A max output current, and 3.3V nominal voltage. It is designed for automotive applications, featuring a small outline package style and AEC-Q100 screening level. With push-pull output characteristics and true output polarity, it operates in temperatures ranging from -40 to 125°C.
IR21844SPBF
International Rectifier
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LTC4372CMS8#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
HIP4086ABT
Harris Semiconductor
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Shape: RECTANGULAR; Qualification: Not Qualified;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8286BD-IS
Silicon Labs
BUFFER OR INVERTER BASED MOSFET DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
Skyworks Solutions
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 3;
SI8286CD-IS
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BUFFER OR INVERTER BASED MOSFET DRIVER; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
SI8233BB-D-IS1R
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Power Supplies (V): 3/5,12/15;
SI8271GB-ISR
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER;
SI8233BB-D-IS1
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP16,.25;
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Peak Reflow Temperature (C): 260; Built-in Protections: UNDER VOLTAGE; Power Supplies (V): 3/5,12/15; Qualification: Not Qualified; Output Current Flow Direction: SOURCE AND SINK;
SI8231AB-D-IS1
SI8231AB-D-IS1 by Silicon Labs is a MOSFET gate driver with 16 terminals, operating voltage range of 4.5-24V, and built-in under voltage protection. It has a turn-on/off time of 0.045us and supports high side drivers. Ideal for applications requiring precise control over power supplies in compact spaces.
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 5.5 V;
SI8231AB-D-IS
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8238BB-D-IS1R
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
SI8233BD-D-IS
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Qualification: Not Qualified; Built-in Protections: UNDER VOLTAGE; Peak Reflow Temperature (C): 260; Power Supplies (V): 3/5,12/15; Output Current Flow Direction: SOURCE AND SINK;
SI8238BB-D-IS1
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Power Supplies (V): 3/5,12/15; JESD-609 Code: e4; Qualification: Not Qualified; Peak Reflow Temperature (C): 260; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
SI8238BB-D-IS1 by Silicon Labs is a MOSFET gate driver with 16 terminals, operating voltage range of 2.7-24 V, and built-in under voltage protection. It has a compact rectangular package style, suitable for high side driving applications in various industries like automotive and industrial automation. With fast turn-on/off times of 0.045 us, it ensures efficient power management at temperatures ranging from -40 to 125 °C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved