Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8231AB-D-IS by Silicon Labs is a MOSFET gate driver with 2 functions, operating at 4.5-24V. It offers under voltage protection and supports power supplies of 3/5,12/15V. Ideal for applications requiring high side drivers in compact spaces due to its small outline package style.
Median Price
$2.380
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
$1.633
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
Mouser Electronics
$3.300
$2.220
$2.140
$2.060
Verical
Digiode
$1.511
Nova Conductors
$1.872
Vyrian
Ampacity Inc.
$1.350
Corphita
$1.432
Continental Prestige Electronics
$1.835
Argo Parts USA
Netroflash
AZTECH Wire
$15.207
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
The use of plastic/epoxy material makes the package lightweight and cost-effective.
Surface mount packaging allows for easy and convenient installation on circuit boards.
Can handle a maximum supply voltage of 5.5 V, making it suitable for a wide range of applications.
Having 2 functions in one device helps in simplifying the circuit design and reducing component count.
Rectangular shape allows for efficient use of space on the PCB.
Built-in under voltage protection ensures safe operation of the device and protects it from damage.
Ability to handle a maximum supply voltage of 24 V provides flexibility for use in different power supply configurations.
Support for multiple power supply voltages allows for compatibility with various systems.
Having 16 terminals provides versatility in connecting the device to other components in the circuit.
Small outline package style saves space on the PCB and allows for compact designs.
Can operate reliably at a minimum supply voltage of 6.5 V, ensuring stable performance.
Support for a minimum supply voltage of 4.5 V ensures compatibility with low-power systems.
High maximum operating temperature of 125°C ensures reliability in harsh environments.
Low minimum operating temperature of -40°C allows for operation in cold conditions.
Dual terminal position provides flexibility in mounting and connecting the device.
Low maximum seated height helps in reducing the overall profile of the circuit board.
Compact width of 7.5 mm enables efficient use of space on the PCB.
Presence of high side driver capability allows for driving power MOSFETs in high-side configurations.
Length of 10.3 mm is suitable for compact and space-constrained designs.
Gull wing terminal form provides reliable solder connections and ease of assembly.
Support for a nominal supply voltage of 5 V ensures compatibility with standard power sources.
Fast turn-on time of 0.045 us enhances the switching performance of the device.
Terminal pitch of 1.27 mm allows for easy and secure connections on the PCB.
Support for a nominal supply voltage of 12 V allows for compatibility with higher voltage systems.
Nominal output peak current limit of 0.5 A ensures safe operation and protects the device from overcurrent conditions.
Half bridge based IGBT/MOSFET driver interface IC type offers versatility in driving power transistors in various configurations.
Fast turn-off time of 0.045 us helps in minimizing switching losses and improving efficiency.
Support for both source and sink current flow direction ensures flexibility in driving different types of loads.
MOSFET Gate Drivers SI8231AB-D-IS attributes and parameters. Explore more MOSFET Gate Drivers devices from Silicon Labs
Built-in Protections:
High Side Driver:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage-1:
Minimum Supply Voltage-1:
Nominal Supply Voltage-1:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
SI8231AB-D-IS Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Devices 06/Nov/2017 Si823x 12/Sep/2018
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Hi-tron Semiconductor
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Toshiba
LTC4372CDD#TRPBF
Analog Devices
BUFFER OR INVERTER BASED MOSFET DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
IR2101PBF
International Rectifier
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM5109AMA/NOPB
National Semiconductor
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UCC23513BQDWYRQ1
UCC23513BQDWYRQ1 by Texas Instruments is a MOSFET gate driver with 6 terminals, operating temperature range of -40 to 125 °C. It has a max supply voltage of 33 V and output current of 4.5 A, suitable for automotive applications due to its AEC-Q100 screening level. The driver features push-pull output characteristics and a small outline package style, making it ideal for high side driving in automotive systems.
FAN73711MX
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM5050MK-1/NOPB
MOSFET Drivers; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8233BB-D-IS1R
Skyworks Solutions
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Power Supplies (V): 3/5,12/15;
MIC4604YMT-TR
Microchip Technology
MIC4604YMT-TR by Microchip is a MOSFET gate driver with 10 terminals, operating at -40 to 125 °C. It has a max supply voltage of 16 V and min of 5.25 V, suitable for automotive applications. With a turn-on/off time of 0.075 us, it features Schmitt trigger input characteristics and true output polarity.
LM5050MKX-1
LM5050MKX-1 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 75V and min supply voltage of 5V. It features a small outline package style, suitable for automotive applications requiring high side drivers. With an operating temperature range from -40°C to 125°C, it offers reliable performance in harsh environments.
UCC21222DR
UCC21222DR by Texas Instruments is a MOSFET gate driver with 2 channels, 6A output current, and built-in transient & under voltage protections. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 0.04us. Ideal for driving IGBT/MOSFETs in automotive applications.
UCC27531DBVR
UCC27531DBVR by Texas Instruments is a MOSFET gate driver with a max supply voltage of 32V and output current of 5A. It features a small outline package, suitable for automotive applications. With fast turn-on/off times of 0.026us, it is ideal for half-bridge based IGBT/MOSFET driver interfaces.
LTC7003IMSE#TRPBF
LTC7003IMSE#TRPBF by Analog Devices is a MOSFET gate driver with a max supply voltage of 60V and turn-on/off time of 0.07us. It is designed for automotive applications, featuring a small outline package style and operating temperature range from -40°C to 125°C. This surface-mount device has dual terminals and matte tin finish, making it suitable for high-side driver requirements in automotive systems.
ZXGD3006E6QTA
BUFFER OR INVERTER BASED MOSFET DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
TC4426AEOA
Telcom Semiconductor
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ICL7667MJA/883B
Intersil
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
UCC27323DGNG4
UCC27323DGNG4 by Texas Instruments is a MOSFET gate driver with 2 functions, operating at supply voltages b/w 4.5V to 15V. It features a small outline package style, totem-pole output characteristics, and an inverted output polarity. Ideal for automotive applications due to its BICMOS technology and dual terminal position.
SKHI22AH4R
Semikron International
SKHI22AH4R by Semikron International is a MOSFET gate driver with 2 functions, operating at supply voltages b/w 14.4V to 15.6V. It offers built-in protections against transient events, over current, and under voltage conditions. Ideal for industrial applications requiring a reliable half bridge based IGBT driver with fast turn-on/off times of 1.15 us and source/sink output current flow direction.
MIC5021YM-TR
Micrel
LTC7000JMSE#WPBF
LTC7000JMSE#WPBF by Analog Devices is a MOSFET gate driver with a max supply voltage of 150V and min supply voltage of 3.5V. It operates in automotive applications, offering a turn-on time of 0.07us and turn-off time of 0.07us, suitable for high side driver configurations.
IR2104STR
IR2104STR by International Rectifier is a MOSFET gate driver with a max supply voltage of 20V, suitable for automotive applications. It features a high side driver and Schmitt trigger input characteristics, with turn-on time of 0.82us and turn-off time of 0.22us. This small outline package has 8 terminals and operates in temperatures ranging from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8286BD-IS
Silicon Labs
BUFFER OR INVERTER BASED MOSFET DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 3;
SI8286CD-IS
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
BUFFER OR INVERTER BASED MOSFET DRIVER; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8271GB-ISR
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER;
SI8233BB-D-IS1
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP16,.25;
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Peak Reflow Temperature (C): 260; Built-in Protections: UNDER VOLTAGE; Power Supplies (V): 3/5,12/15; Qualification: Not Qualified; Output Current Flow Direction: SOURCE AND SINK;
SI8231AB-D-IS1
SI8231AB-D-IS1 by Silicon Labs is a MOSFET gate driver with 16 terminals, operating voltage range of 4.5-24V, and built-in under voltage protection. It has a turn-on/off time of 0.045us and supports high side drivers. Ideal for applications requiring precise control over power supplies in compact spaces.
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 5.5 V;
SI8231AB-D-IS
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8238BB-D-IS1R
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
SI8233BD-D-IS
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Qualification: Not Qualified; Built-in Protections: UNDER VOLTAGE; Peak Reflow Temperature (C): 260; Power Supplies (V): 3/5,12/15; Output Current Flow Direction: SOURCE AND SINK;
SI8238BB-D-IS1
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Power Supplies (V): 3/5,12/15; JESD-609 Code: e4; Qualification: Not Qualified; Peak Reflow Temperature (C): 260; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
SI8238BB-D-IS1 by Silicon Labs is a MOSFET gate driver with 16 terminals, operating voltage range of 2.7-24 V, and built-in under voltage protection. It has a compact rectangular package style, suitable for high side driving applications in various industries like automotive and industrial automation. With fast turn-on/off times of 0.045 us, it ensures efficient power management at temperatures ranging from -40 to 125 °C.
SI8231AB-D-ISR
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 2.65 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved