Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' ETRX2HR-PA is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 38 terminals, operating from -40 to 85°C. Ideal for TELECOM CIRCUITS, it has a 3V supply voltage and INDUSTRIAL temperature grade, making it suitable for telecom interface applications.
Median Price
$17.259
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
EXC GmbH
1+ parts
$16.851
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$17.666
Vyrian
Sunrise Surplus Inc.
Digiode
Benley Electronics
$2.000
AZTECH Wire
$4.970
$4.770
$4.680
$4.580
Netroflash
$17.313
Continental Prestige Electronics
Ampacity Inc.
$852.000
Argo Parts USA
Authorized Procurement Solutions
Corphita
Perfect Parts
Surface mount technology makes installation easier and allows for a more compact design, saving space on the printed circuit board.
Higher number of terminals provide versatility for connection options and functionality.
Ability to operate at high temperatures ensures reliability in demanding industrial applications.
Compact width allows for efficient use of space on the PCB.
Optimal supply voltage for efficient performance and energy consumption.
Other Function Telecom Interface ICs ETRX2HR-PA attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
ETRX2HR-PA Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BQ51013BRHLT
BQ51013BRHLT by Texas Instruments is a Telecom IC with 20 terminals, operating b/w -40 to 125°C. It has a supply voltage of 5V and data rate of 0.002 Mbps, suitable for automotive applications due to its nickel/palladium/gold terminal finish. The chip carrier package style with very thin profile makes it ideal for surface mount designs.
CYBLE-224116-01
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
SA606DK/01,118
NXP Semiconductors
SA606DK/01,118 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. Operating temperature range from -40 to 85°C, with terminal finish of nickel palladium gold. Ideal for telecom circuits requiring nominal voltage of 3V and industrial temperature grade.
NINA-B112-04B
U-blox Ag
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 4;
MAX-M8W-0
MAX-M8W-0 by U-blox Ag is an AEC-Q100 graded GNSS Module with 18 terminals, operating b/w -40 to 85°C. With a compact size of 9.7mm x 10.1mm x 2.7mm, it's ideal for industrial applications requiring precise location tracking and navigation capabilities at a supply voltage of 3V.
WL1831MODGBMOCR
WL1831MODGBMOCR by Texas Instruments is a telecom IC with 100 terminals, operating at 3.7V. It offers a data rate of 100 Mbps and can withstand temperatures from -20 to 70°C. Ideal for applications requiring high-speed communication in commercial-grade environments.
WL1801MODGBMOCT
WL1801MODGBMOCT by Texas Instruments is a telecom IC with 100 terminals in a grid array package. It operates at -20 to 70°C, with a supply voltage of 3.7V and data rate of 100 Mbps. Ideal for telecom circuits, it has a compact rectangular shape and surface-mount capability.
ATECC508A-SSHDA-T
Microchip Technology
Microchip ATECC508A-SSHDA-T is a telecom IC with 1 function, operating at -40 to 85°C. It features CMOS technology, 3.6V supply voltage, and TS16949 screening level. Ideal for telecom circuits, this small outline package has 8 terminals in a rectangular shape for surface mount applications.
BM71BLES1FC2-0B05BA
BM71BLES1FC2-0B05BA by Microchip Technology is a surface mount telecom interface IC with 16 terminals. It operates at temperatures ranging from -40 to 85 °C and has a max seated height of 2.1 mm. With a data rate of 0.0086 Mbps, it is suitable for various telecom circuit applications.
SX1502I087TRT
Semtech
Semtech's SX1502I087TRT is a telecom IC with 20 terminals in a square chip carrier package. Operating from -40 to 85°C, it has a nominal voltage of 3.3V and matte tin terminal finish. Ideal for telecom circuits, this IC is surface mountable and features an industrial temperature grade.
MGM240PB32VNA3
Silicon Labs
TELECOM CIRCUIT;
NINA-B112-04B-00
SA606DK/01,112
SA606DK/01,112 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. It operates b/w -40 to 85°C, with a supply voltage of 3V. Ideal for telecom circuits, it features nickel/palladium/gold terminal finish and Gull Wing form factor.
SIM7070G
Simcom Wireless Solutions
SIM7070G by Simcom Wireless Solutions is a telecom IC with 1.119 Mbps data rate, suitable for industrial use. It operates b/w -40 to 85°C, has 68 terminals in a square package shape, and is surface mountable.
ST25RU3993-BQFT
STMicroelectronics
MAX7042ATJ+
Analog Devices
Analog Devices' MAX7042ATJ+ is a CMOS Telecom IC with 32 terminals in a square chip carrier package. It operates at -40 to 125 °C, with power supplies of 3/5 V. Ideal for automotive applications, it has a low supply current of 0.0092 mA and terminal pitch of 0.5 mm.
HMC624ALP4E
Hittite Microwave
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ZED-F9P-01B-01
Other Telecom ICs;
LBEE5HY1MW-230
Murata Manufacturing
Murata Manufacturing's LBEE5HY1MW-230 is a telecom IC with 72 terminals, operating at -30 to 85°C. With a compact size of 7.9mm x 7.3mm x 1.1mm, it has a supply voltage of 3.3V and peak reflow temp of 250°C. Ideal for telecom applications due to its no-lead terminal form and MSL level of 3.
CC1125RHMR
CC1125RHMR by Texas Instruments is a telecom IC with 32 terminals in a square chip carrier package. Operating at -40 to 85°C, it has a supply voltage of 3V and terminal pitch of 0.5mm. Ideal for telecom circuits, this IC is surface mountable and features nickel palladium gold finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ETRX357HR-LRS
Silicon Labs' ETRX357HR-LRS is a telecom IC with 33 terminals, operating b/w -40°C to 85°C. With a nominal voltage of 3V, it's ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and DUAL terminal position.
ETRX357HR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 33; Package Shape: RECTANGULAR; Package Style (Meter): MICROELECTRONIC ASSEMBLY;
ETRX357-LRS
Silicon Labs' ETRX357-LRS is a telecom IC with 33 terminals, operating from -40 to 85°C. With a supply voltage of 3V, it's ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and DUAL terminal position.
ETRX357
ETRX357 by Silicon Labs is a telecom IC with 33 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3V and terminal pitch of 1.27mm. This industrial-grade IC is used in telecom circuits for various applications due to its compact rectangular package style and no-lead terminal form.
ETRX2-PA
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 38; Package Shape: RECTANGULAR; Terminal Position: UNSPECIFIED;
ETRX357HR-LRSCB
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ETRX2
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 38; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
ETRX3585-LRS
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
ETRX3585HR-LRS
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Length: 25 mm;
ETRX2HR
Silicon Labs' ETRX2HR is a surface mount telecom IC with 1 function. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3V. With its compact size (20.5mm x 37.5mm), it is suitable for various telecom circuit applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved