Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' ETRX2HR is a surface mount telecom IC with 1 function. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3V. With its compact size (20.5mm x 37.5mm), it is suitable for various telecom circuit applications.
Median Price
$16.456
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$15.272
Netroflash
$16.127
$15.633
$15.304
Ampacity Inc.
$353.000
Authorized Procurement Solutions
Corphita
This product is surface mountable, allowing for easy and convenient installation on PCBs and reducing the need for additional components.
Having a single function simplifies the design and operation of the product, making it more efficient and user-friendly.
The rectangular package shape offers a compact and space-saving design, making it suitable for applications with limited board space.
With a high number of terminals, this product can accommodate a wide range of connections, providing versatility and flexibility in various telecom applications.
The microelectronic assembly package style ensures precise and reliable assembly, enhancing the overall performance and durability of the product.
The high maximum operating temperature enables this product to withstand demanding environments, ensuring reliable and stable performance even under extreme conditions.
The wide operating temperature range allows this product to be used in both hot and cold environments, making it suitable for diverse applications.
The compact width of this product contributes to its space-saving design, enabling integration into tight spaces and maximizing the use of available board area.
The product's moderate length helps maintain a balanced and ergonomic design, making it easier to fit into various equipment or systems.
Designed for industrial-grade applications, this product is capable of withstanding harsh operating conditions, ensuring long-term reliability in demanding environments.
With a no-lead terminal form, this product offers improved mechanical and electrical performance, reducing the risk of solder joint failure and enhancing overall product quality.
Specifically designed as a telecom circuit IC, this product possesses optimized features and functionalities tailored for telecom applications, ensuring superior performance and compatibility.
Operating at a nominal supply voltage of 3V, this product provides efficient power consumption, making it suitable for use in battery-powered or low-power telecom devices.
The standard terminal pitch of 2.54 mm ensures compatibility and ease of integration with various connectors and sockets, simplifying the assembly process and facilitating system compatibility.
Other Function Telecom Interface ICs ETRX2HR attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
ETRX2HR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
2N7002
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
ADAR1000ACCZN
Analog Devices
ADAR1000ACCZN by Analog Devices is a telecom IC with 88 terminals in a grid array package. It operates b/w -40°C to 85°C, with a nominal voltage of 3.3V and negative supply voltage of -5V. This IC is designed for telecom circuits requiring precise temperature control and industrial-grade performance.
ATPL250A-AKU-R
Atmel
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE;
RFFC2071ATR13
Qorvo
RFFC2071ATR13 by Qorvo is a surface mount telecom interface IC with 32 terminals. It operates in an industrial temperature range of -40 to 85 °C and has a very thin profile with a seated height of 0.95 mm. This CMOS technology chip carrier is commonly used in telecom circuits with a nominal voltage of 3 V.
TDA5201XUMA1
Infineon Technologies
TDA5201XUMA1 by Infineon is a telecom IC with 28 terminals, operating from -40 to 85°C. It has a small outline package style, Gull Wing terminals, and 5V supply voltage. Ideal for telecom circuits in industrial applications due to its compact size and high temperature range.
ATWILC1000-MR110UB
ATWILC1000-MR110UB by Microchip Technology is a surface mount telecom interface IC with 1 function. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 72.2 Mbps. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
EFR32BG22C224F512IM40-C
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
MP45DT02TR-M
STMicroelectronics MP45DT02TR-M is a telecom IC with 6 terminals, operating b/w -30 to 85°C. It has a rectangular shape, grid array package style, and nickel palladium gold finish. With a nominal voltage of 1.8V, it's ideal for telecom circuit applications due to its compact size (4.72mm x 3.76mm) and no-lead terminal form.
RN4871-V/RM130
RN4871-V/RM130 by Microchip Technology is a telecom IC with 16 terminals, operating at -20 to 70°C. It has a supply voltage of 3.3V and data rate of 0.01 Mbps. This surface-mount IC is ideal for telecom applications requiring TS 16949 screening and operates in commercial temperature grade.
NORA-B101-00B
U-blox Ag
TELECOM CIRCUIT;
CYG2030
IXYS Corporation
IXYS Corporation's CYG2030 is a hybrid technology IC with 18 terminals in an in-line package style. Operating at 0-70°C, it requires 5V supply voltage and draws a max current of 9mA. Ideal for telecom interfaces, this IC is made of plastic/epoxy material and features dual terminal positions.
BMD-300-A-R
The U-blox Ag BMD-300-A-R is a surface mount telecom IC with a data rate of 2 Mbps. Operating temperature ranges from -40 to 85°C, suitable for industrial applications. Its package style is microelectronic assembly, making it ideal for various telecom circuit designs.
WL1805MODGBMOCT
WL1805MODGBMOCT by Texas Instruments is a telecom interface IC with 100 terminals in a rectangular grid array package. Operating at -20 to 70°C, it supports data rates up to 100 Mbps at 3.7V supply voltage. Ideal for commercial applications requiring high-speed telecommunications functionality.
LMS7002M
Lime Microsystems
Lime Microsystems' LMS7002M is a telecom IC with 261 terminals, operating from -40 to 85°C. It has a nominal voltage of 1.2V and uses a grid array package style. Ideal for industrial applications requiring precise telecom circuit functionality in compact form factor.
TDA5210XUMA1
TDA5210XUMA1 by Infineon is a telecom IC with 28 terminals, operating from -40 to 105°C. It features a small outline package style, tin terminal finish, and 5V supply voltage. Ideal for telecom circuits, it has a rectangular shape and thin profile suitable for industrial applications.
NEO-M8N-0
NEO-M8N-0 by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. Its compact rectangular package measures 12.2mm x 16mm, suitable for industrial applications requiring a 3V supply voltage and AEC-Q100 screening level.
RN4678APL-V/RM120
RN4678APL-V/RM120 by Microchip Technology is a telecom IC with 33 terminals, operating b/w -20 to 70°C. It has a supply voltage of 1.9V and terminal pitch of 1.1mm. This surface-mount rectangular package is ideal for telecom circuit applications due to its compact size and commercial temperature grade suitability.
MAX-8Q-0
MAX-8Q-0 by U-blox Ag is an AEC-Q100 graded telecom IC with 18 terminals, operating b/w -40 to 85°C. With a nominal voltage of 3V, it is ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package style. The IC's DUAL terminal position and NO LEAD form make it suitable for telecom circuit designs needing high reliability in harsh environments.
RN4678-V/RM111
RN4678-V/RM111 by Microchip Technology is a telecom IC with 33 terminals, operating temperature range of -20 to 70°C, and supply voltage of 1.9V. It is designed for surface mount applications in telecom circuits, meeting TS 16949 screening standards. With a compact rectangular package style and no-lead terminal form, it is ideal for commercial use in various electronic devices.
OPA380AIDGKT
OPA380AIDGKT by Texas Instruments is a telecom interface IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage of 5V and low supply current of 0.008mA, suitable for automotive applications. The package is small outline, thin profile, with gull wing terminals and moisture sensitivity level of 2.
XB3-24ARM
Digi International
The Digi International XB3-24ARM is a TELECOM CIRCUIT with 1 Mbps Data Rate. It operates b/w -40°C to 85°C, making it suitable for various telecom applications. The RECTANGULAR package style and SPECIAL SHAPE design enhance its performance in Other Function Telecom Interface ICs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ETRX357HR-LRS
Silicon Labs' ETRX357HR-LRS is a telecom IC with 33 terminals, operating b/w -40°C to 85°C. With a nominal voltage of 3V, it's ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and DUAL terminal position.
ETRX357HR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 33; Package Shape: RECTANGULAR; Package Style (Meter): MICROELECTRONIC ASSEMBLY;
ETRX357-LRS
Silicon Labs' ETRX357-LRS is a telecom IC with 33 terminals, operating from -40 to 85°C. With a supply voltage of 3V, it's ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and DUAL terminal position.
ETRX357
ETRX357 by Silicon Labs is a telecom IC with 33 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3V and terminal pitch of 1.27mm. This industrial-grade IC is used in telecom circuits for various applications due to its compact rectangular package style and no-lead terminal form.
ETRX2-PA
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 38; Package Shape: RECTANGULAR; Terminal Position: UNSPECIFIED;
ETRX2HR-PA
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 38; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
ETRX357HR-LRSCB
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ETRX2
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 38; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
ETRX3585-LRS
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
ETRX3585HR-LRS
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Length: 25 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved