Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' ETRX2 is a telecom IC with 38 terminals, operating at -40 to 85°C. It has a 3V supply voltage and terminal pitch of 2.54mm. Ideal for industrial applications requiring surface mount microelectronic assemblies in rectangular package style.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
LIBRA Elektronik GmbH
AZTECH Wire
$14.780
Ampacity Inc.
$558.000
Corphita
Netroflash
Surface mount technology allows for easy and convenient installation of the IC onto PCBs, saving space and reducing assembly time.
Rectangular package shape is commonly used in telecom interface ICs, providing a standardized form factor for compatibility with various devices.
With 38 terminals, this IC offers a sufficient number of connections for handling complex telecom functions efficiently.
The high maximum operating temperature ensures reliable performance even in challenging industrial environments.
Compact width of 20.5 mm allows for integration into tight spaces while facilitating board layout and design.
The nominal supply voltage of 3 V is commonly used in telecom applications, providing compatibility with standard power sources.
Other Function Telecom Interface ICs ETRX2 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
ETRX2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Meritek Electronics
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Semitronics
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
International Semiconductor
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Rfe International
XB3-24Z8ST-J
Digi International
XB3-24Z8ST-J by Digi Int. is a telecom IC with 20 terminals in MICROELECTRONIC ASSEMBLY package. Operating temp range -40 to 85°C, suitable for INDUSTRIAL applications. Features THROUGH-HOLE terminals and DUAL position, ideal for TELECOM CIRCUIT designs.
EC21AFA-512-STD
Quectel Wireless Solutions
Quectel Wireless Solutions EC21AFA-512-STD is a RECTANGULAR MICROELECTRONIC ASSEMBLY with -40 to 85 °C operating temp range. It features QUAD terminals, 29mm width, and 3.8V supply voltage. Ideal for INDUSTRIAL telecom applications due to its compact size and high temperature tolerance.
ODIN-W260-05B-00
U-blox Ag
Other Telecom ICs; Moisture Sensitivity Level (MSL): 4;
MGC3130-I/MQ
Microchip Technology
MGC3130-I/MQ by Microchip is a 28-terminal IC with matte tin finish. Operating b/w -40 to 85 °C, it's ideal for industrial telecom applications. With a nominal voltage of 3.3 V and terminal pitch of 0.5 mm, this chip carrier suits compact designs.
NEO-M8U-0-10
NEO-M8U-0-10 by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. Its compact MICROELECTRONIC ASSEMBLY package makes it ideal for industrial applications requiring a 3V supply voltage. AEC-Q100 and TS 16949 screening ensure high reliability in automotive and telecom systems.
TLV320AIC22CPT
TLV320AIC22CPT by Texas Instruments is a 48-terminal telecom IC with 16-bit linear coding and A/MU-LAW companding law. It operates at temperatures ranging from -40 to 85°C, suitable for industrial applications. The package style is flatpack, low profile, fine pitch, making it ideal for surface mount designs.
SA636DK/01,112
NXP Semiconductors
SA636DK/01,112 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include nickel palladium gold terminal finish, 3V supply voltage, and gull wing terminal form for telecom circuit applications.
XB3-24Z8ST
The Digi International XB3-24Z8ST is an industrial-grade telecom circuit with 20 terminals in a through-hole package. It operates b/w -40°C to 85°C, making it suitable for various telecom interface applications. Its dual terminal position and microelectronic assembly style enhance its functionality in telecommunications systems.
NEO-M8T-0
NEO-M8T-0 by U-blox Ag is a telecom IC with 24 terminals, operating from -40 to 85°C. With a compact size of 12.2mm x 16mm and low supply voltage of 3V, it's ideal for industrial applications requiring precise positioning and timing accuracy. Its no-lead terminal form and dual position make it suitable for various telecom circuit designs.
TLK2711AIRCP
TLK2711AIRCP by Texas Instruments is a telecom IC with 64 terminals, operating at 2.5V. It has a temperature range of -40 to 85°C and features a flatpack package style. Ideal for telecom circuit applications due to its industrial-grade performance and very thin profile design.
MFRC52302HN1,151
NXP Semiconductors' MFRC52302HN1,151 is a telecom IC with 32 terminals in a square chip carrier package. It operates b/w -25°C to 85°C, with a nominal voltage of 3.3V. Ideal for applications requiring a very thin profile and surface mount compatibility.
WT12-A-AI4
Silicon Labs
Silicon Labs' WT12-A-AI4 is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 31 terminals. Operating from -40 to 85 °C, it's ideal for INDUSTRIAL applications requiring TELECOM CIRCUIT ICs at 3.3 V supply voltage and 1.5 mm terminal pitch.
CC2530F32RHAT
CC2530F32RHAT by Texas Instruments is a 40-terminal telecom IC with a nominal voltage of 3V. It operates b/w -40 to 125°C, suitable for automotive applications. The chip carrier package style has a very thin profile and is surface mountable, making it ideal for compact designs.
RN41-I/RM477
Microchip Technology's RN41-I/RM477 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in a rectangular package style. Ideal for industrial applications requiring reliable telecom circuit interfaces.
CYBLE-212006-01
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 30; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
SA639DH/01,118
SA639DH/01,118 by NXP Semiconductors is a telecom interface IC with 24 terminals in a small outline package. Operating b/w -40 to 85 °C, it has a nominal voltage of 3V and terminal pitch of 0.65mm. Ideal for industrial applications requiring telecom circuit functionality.
BGM15LA12E6327XTSA1
Infineon Technologies
BGM15LA12E6327XTSA1 by Infineon is a telecom IC with 12 terminals in a rectangular chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 2.8V and terminal finish of gold nickel, ideal for telecom circuit applications.
RS9116W-SB00-QMS-B2A
TELECOM CIRCUIT;
BM71BLES1FC2-0B02AA
BM71BLES1FC2-0B02AA by Microchip is a telecom IC with 16 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3V. It is a surface mount rectangular package suitable for industrial applications, offering data rate of 0.0086 Mbps.
EFR32BG13P732F512GM48-B
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ETRX357HR-LRS
Silicon Labs' ETRX357HR-LRS is a telecom IC with 33 terminals, operating b/w -40°C to 85°C. With a nominal voltage of 3V, it's ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and DUAL terminal position.
ETRX357HR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 33; Package Shape: RECTANGULAR; Package Style (Meter): MICROELECTRONIC ASSEMBLY;
ETRX357-LRS
Silicon Labs' ETRX357-LRS is a telecom IC with 33 terminals, operating from -40 to 85°C. With a supply voltage of 3V, it's ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and DUAL terminal position.
ETRX357
ETRX357 by Silicon Labs is a telecom IC with 33 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3V and terminal pitch of 1.27mm. This industrial-grade IC is used in telecom circuits for various applications due to its compact rectangular package style and no-lead terminal form.
ETRX2-PA
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 38; Package Shape: RECTANGULAR; Terminal Position: UNSPECIFIED;
ETRX2HR-PA
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 38; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
ETRX357HR-LRSCB
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ETRX3585-LRS
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
ETRX3585HR-LRS
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Shape: RECTANGULAR; Length: 25 mm;
ETRX2HR
Silicon Labs' ETRX2HR is a surface mount telecom IC with 1 function. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3V. With its compact size (20.5mm x 37.5mm), it is suitable for various telecom circuit applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved