Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NRF52840-QIAA-R7 by Nordic Semiconductor is a telecom IC with 73 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and terminal pitch of 0.5mm. Ideal for industrial applications requiring high temperature tolerance and telecom circuit functionality.
Median Price
$4.350
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$3.970
100+ parts
-
1k+ parts
10k+ parts
Symmetry
$4.750
$4.000
$3.650
Distrelec
$7.160
$6.046
Mouser Electronics
$7.500
$4.970
$3.930
Element14
$9.530
$6.150
$6.100
DigiKey
Newark
$4.250
$3.870
$3.740
Chip1Stop
$3.679
Verical
Farnell
$4.170
Ozdisan Elektronik
$5.268
Nova Conductors
$6.023
Chip Stock
NAC Semi
$7.980
$7.370
IBS Electronics
$6.585
Vyrian
Cyclops Electronics Ltd
Semtec, LLC
ComSIT Distribution GmbH
ComSIT USA
AZTECH Wire
$4.660
$4.480
$4.390
$4.300
Aranea Global
$5.903
$5.666
Modulus Dynamics
$6.686
$6.619
$6.418
Advanced Electronics
$7.559
$7.181
Aztec Data Supply Inc.
$15.570
Corohmni
$16.507
GreenTree Electronics
XScomponents
$12.750
Authorized Procurement Solutions
Continental Prestige Electronics
$4.370
Eastek
$5.213
Argo Parts USA
Robosynatics
Lucentia Tech
$4.566
Infinite Electronics LLP (Excess)
Formix International (Excess)
The use of plastic/epoxy material makes the product lightweight and durable, suitable for telecommunication applications.
Surface mount capability allows for easy and efficient assembly onto circuit boards, saving time and effort during production.
The square shape of the package provides a compact design, saving space in electronic devices.
With a high maximum operating temperature, the product can withstand demanding industrial environments without overheating.
The nominal supply voltage of 3V is commonly used in telecommunication systems, ensuring compatibility and seamless integration.
Other Function Telecom Interface ICs NRF52840-QIAA-R7 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Nordic Semiconductor Asa
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NRF52840-QIAA-R7 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - IN_171_v1.0 3/22/23 NRF52840 Design Chgs 20/Feb/2020
PCN Assembly/Origin - nRF52840-QIAA 12/Aug/2021
PCN Packaging - All Devices Label Chgs 11/Feb/2020
Nordic Semiconductor is a Norwegian fabless semiconductor company specializing in wireless communication technology that powers the Internet of Things (IoT). Nordic was established in 1983 and has more than 1300 employees across the globe. Our award-winning Bluetooth Low Energy solutions pioneered ultra-low power wireless, making us the global market leader. Our technology range was later supplemented by ANT+, Thread and Zigbee, and in 2018 we launched our low power, compact LTE-M/NB-IoT cellular IoT solutions to extend the penetration of the IoT. The Nordic portfolio was further complemented by Wi-Fi technology in 2021. We built our market reputation by supplying leading-edge wireless technologies supported by development tools that shield the designer from RF complexity, allowing anyone with a bright idea to build innovations based on the IoT platform. Today, our award-winning, high-performance, yet easy to design-in, Bluetooth LE solutions are used by the world’s leading brands in a variety of products, including wireless PC peripherals, gaming, sports and fitness, mobile phone accessories, consumer electronics, toys, healthcare and automation. Nordic is a member of the ANT+ Alliance, Bluetooth SIG, Thread Group, Connectivity Standards Alliance, Wi-Fi Alliance, and GSMA.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148W-T
Rectron
Rugao Dachang Electronic
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
BMD-300-A-R
Rigado
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 47; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
BT832F
Fanstel
BT832F by Fanstel is a surface mount telecom IC with 40 terminals. It operates in an industrial temperature range of -40 to 85°C and has a data rate of 1 Mbps. This compact rectangular package is suitable for various telecom circuit applications.
CLRC66302HN,157
The NXP Semiconductors CLRC66302HN,157 is a telecom interface IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 105°C and has a data rate of 1 Mbps at 5V supply voltage. Ideal for industrial applications requiring high-speed communication in compact spaces.
RN41-I/RM
Microchip Technology
Microchip Technology's RN41-I/RM is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and matte tin finish, suitable for industrial applications requiring surface mount packaging in a compact rectangular shape.
NINA-B112-04B
U-blox Ag
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 4;
BT121-A-V2
Silicon Labs
BT121-A-V2 by Silicon Labs is a telecom IC with 33 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1mm. This surface-mount IC is ideal for industrial applications requiring compact MICROELECTRONIC ASSEMBLY packages.
WF111-A-V1
TELECOM CIRCUIT;
ADF7012BRUZ-RL
Analog Devices
Analog Devices' ADF7012BRUZ-RL is a telecom IC with 24 terminals, operating at 2.5/3.3V. It has a temperature range of -40 to 85°C and uses CMOS technology. The package style is small outline, thin profile, shrink pitch, making it suitable for industrial telecom applications.
453-00005
Laird Technologies
453-00005 by Laird Technologies is a surface mount telecom IC with 39 terminals. Operating b/w -40 to 85°C, it has a compact rectangular package style measuring 14x10x2.33mm. Ideal for industrial applications requiring a 3V supply voltage and telecom circuit functionality.
HTRC11001T/03EE
NXP Semiconductors' HTRC11001T/03EE is a telecom IC with 14 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and current of 0.01mA, suitable for industrial applications. The package is small outline, rectangular in shape, with gull wing terminals for surface mount assembly.
BM20SPKS1NBC-0001AA
BM20SPKS1NBC-0001AA by Microchip Technology is a Telecom IC with 40 terminals, operating at -20 to 70°C. It has a supply voltage of 3.7V and terminal pitch of 1.2mm. Ideal for telecom applications due to its compact rectangular package style and surface mount capability.
M2-JODY-W377-00C
XB3-24Z8CM
Digi International
The Digi International XB3-24Z8CM is a surface mount telecom IC with 34 terminals. It operates in industrial temperature range (-40 to 85°C) and has a rectangular package shape (13x19mm). Ideal for telecom circuits, this IC is designed for various applications requiring reliable performance in harsh environments.
AP22814AW5-7
Diodes Incorporated
Diodes Incorporated AP22814AW5-7 is a 5-terminal, telecom interface IC in small outline package with matte tin finish. Operating temp range -40 to 85°C, suitable for industrial use. Telecom circuit type with nominal voltage of 5V, ideal for telecommunications applications.
AX5243-1-TW30
AX5243-1-TW30 by Onsemi is a CMOS telecom IC with 20 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial applications. Features include 3V supply voltage, matte tin finish, and quad terminal position for telecom interface functions.
BQ51013BRHLR
BQ51013BRHLR by Texas Instruments is a Telecom Interface IC with 20 terminals, operating temperature range of -40 to 125°C, and supply voltage of 5V. It is used in automotive applications for telecom circuits, offering data rate of 0.002 Mbps and MSL level of 2.
LEA-M8S-0
LEA-M8S-0 by U-blox Ag is a surface mount RF and baseband circuit with 28 terminals. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 3V. This telecom IC is AEC-Q100 certified, suitable for automotive applications.
CC430F5135IRGZT
CC430F5135IRGZT by Texas Instruments is a telecom IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 2.2V and data rate of 0.5 Mbps. Ideal for industrial applications requiring low-profile surface mount components.
RS9116W-SB00-AA1-X2A
BMD-330-A-R-00
BMD-330-A-R-00 by U-blox Ag is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it is suitable for various telecom circuit applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NRF51822-QFAA-R7
Nordic Semiconductor Asa
NRF51822-QFAA-R7 by Nordic Semiconductor Asa is a 48-terminal chip carrier with a 3V supply voltage. Operating b/w -25°C to 75°C, it's ideal for telecom circuits due to its compact square shape (6x6mm) and very thin profile. This surface-mount IC has quad terminal positions and no-lead form, making it suitable for commercial extended temperature grade applications.
NRF51822-QFAC-R7
NRF51822-QFAC-R7 by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, operating from -25 to 75°C. It features a square chip carrier package style and quad terminal position, suitable for telecom circuit applications requiring a very thin profile design.
NRF52840-QIAA-R
NRF52840-QIAA-R by Nordic Semiconductor Asa is a telecom IC with 73 terminals, operating from -40 to 85°C. It has a nominal voltage of 3V and terminal pitch of 0.5mm. This square-shaped chip carrier is suitable for industrial applications requiring a very thin profile.
NRF51822-QFAB-R7
NRF51822-QFAB-R7 by Nordic Semiconductor Asa is a 48-terminal telecom IC with a 1.8V supply voltage, operating b/w -25°C to 75°C. It features a square chip carrier package style and quad terminal position, suitable for telecom circuit applications requiring a very thin profile design.
NRF51822-QFAC-T
NRF51822-QFAC-T by Nordic Semiconductor Asa is a 48-terminal telecom IC with a 1.8V supply voltage, operating b/w -25°C to 75°C. It features a square chip carrier package style and tin terminal finish, suitable for telecom circuit applications requiring a very thin profile design.
NRF51822-QFAA-R
NRF51822-QFAA-R by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, -25 to 75°C operating temperature range, and 0.4mm terminal pitch. It is used in telecom circuits due to its square chip carrier package style and very thin profile, suitable for surface mount applications.
NRF51822-QFAA-T
NRF51822-QFAA-T by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, operating b/w -25 to 75°C. It comes in a square chip carrier package style, suitable for telecom circuit applications due to its very thin profile and quad terminal position.
NRF51822-QFAC-R
NRF51822-QFAC-R by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, -25 to 75°C operating range, and 0.4mm terminal pitch. It is used in telecom circuits due to its square chip carrier package style and thin profile design.
NRF52840-QIAA-T
NRF52840-QIAA-T by Nordic Semiconductor Asa is a telecom IC with 73 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3V and compact dimensions of 7x7mm, it's ideal for telecom interface applications.
NRF51822-QFAB-R
NRF51822-QFAB-R by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, operating from -25 to 75°C. It features a square chip carrier package style at 0.95mm height, suitable for telecom circuit applications.
NRF52833-QIAA-R
NRF52833-QIAA-R by Nordic Semiconductor Asa is a telecom IC with 2 Mbps data rate. It operates in industrial temperature range (-40 to 105 °C) and has 73 terminals in a square chip carrier package. Ideal for telecom circuit applications, it is surface mountable and features quad terminal position.
NRF52840-CKAA-R7
NRF52840-CKAA-R7 by Nordic Semiconductor Asa is a 93-terminal GRID ARRAY IC with 2 Mbps data rate, operating from -40 to 85 °C. Ideal for TELECOM CIRCUIT applications due to its low profile and fine pitch design.
NRF51822-CEAA-R7
NRF51822-CEAA-R7 by Nordic Semiconductor Asa is a Telecom IC with 62 terminals in a grid array package. Operating from -25 to 75°C, it has a nominal voltage of 1.8V. Ideal for telecom circuits, this IC features a very thin profile and fine pitch design.
NRF51822-CFAC-R
NRF51822-CFAC-R by Nordic Semiconductor Asa is a telecom IC with 62 terminals in a square package. It operates b/w -25°C to 75°C, with a supply voltage of 1.8V. Ideal for applications requiring fine pitch and thin profile grid array packages.
NRF52840-QIAA
NRF52840-QIAA by Nordic Semiconductor Asa is a 73-terminal IC with 3V supply voltage, operating from -40 to 85°C. It features a grid array package style, suitable for industrial telecom circuits. With a 0.5mm terminal pitch and 0.85mm seated height, it offers high performance in compact applications.
NRF51822-QFAB-T
NRF51822-QFAB-T by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, -25 to 75°C operating range, and 0.4mm terminal pitch. It is used in telecom circuits due to its square chip carrier package style and quad terminal position, suitable for surface mount applications.
NRF51822-CDAB-R
TELECOM CIRCUIT; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: BALL; No. of Terminals: 56; Package Code: VFBGA; Package Shape: RECTANGULAR;
NRF51822-CFAC-R7
NRF51822-CFAC-R7 by Nordic Semiconductor Asa is a telecom IC with 62 terminals in a square grid array package. It operates b/w -25°C to 75°C, with a supply voltage of 1.8V. Ideal for applications requiring fine pitch and thin profile components in the commercial extended temperature range.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved