Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Qualification: Not Qualified;
Median Price
$4.400
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
DigiKey Marketplace
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Vyrian
Bristol Electronics
Nova Conductors
Tech-Mark Corp
Anansix
ACDS - Activité Composants Distribution Service
R&J Components
Electronic Expediters
MISTER SPROCKETS
ECAB
Holdelec - ElecDif-Pro
PUI
LittleDiode
Halfin
Sinequanon
Elcom Components
ICP Electronique
Microfarads
Electronics Depot
One Stop Electronics
$0.100
IDEA Electronic Components Group
$2.046
$1.841
ChromeModa Solutions
$2.359
$1.934
DigiPath Technology Company
$3.848
MKK Technologies
AZTECH Wire
$9.446
QUARKTWIN TECHNOLOGY LTD
Corphita
Microchip USA
Argo Parts USA
Continental Prestige Electronics
Parana Technologies
$2.446
Assy Fe
RTC Component Inc.
Aranea Global
Silicon Controlled Rectifiers (SCR) 2N1597 attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Semitronics
Nominal Circuit Commutated Turn-off Time:
Configuration:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
JEDEC-95 Code:
JESD-30 Code:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Repetitive Peak Reverse Voltage:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Trigger Device Type:
2N1597 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
NSN
5961-12-153-2303, 5961121532303, 5961-00-892-0988, 5961008920988, 5961-14-271-1935, 5961142711935
NIIN
121532303, 008920988, 142711935
Founded in 1952 Semitronics Corp was originally a supplier of electron tubes, which led to the distribution of electronic components in the late 50’s. With its expansion to Long Island in the mid 70’s, Semitronics Corp became a manufacturer of discrete commercial components for commercial and industrial industries. After a decade of success, Semitronics began supplying military components starting in the early 1980s. Semitronics moved on to acquire four product lines from the companies of General Electric, Westinghouse and Powerex. These acquisitions helped Semitronics establish itself in the value-added military market of providing electronic components to the country’s highest leading military Original Equipment Manufacturers (OEM’s) in the market. Semitronics established itself as a proven supplier of electronic component to the country’s leading military manufacturers along with the approval of their principal programs, which include: Apache TOW Missile M-130 Flare Dispenser Patriot Missile F-16 Falcon F-18 Superhornet Gator Cluster Bomb The Eurofighter Mark-54 Lightweight Torpedo And many more Semitronics continues to supply hi-reliability components providing an extensive list of products and services. With its military approved MIL-PRF-19500 manufacturing certification to the JAN, JANTX and JANTXV, it allows SES to provide not only standard components, but also selective devices that are required to meet the militaries Specification Drawing Requirements (SCD).
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N2323
Silicon Transistor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
S8008DTP
Littelfuse
S8008DTP by Littelfuse is a single SCR with 15mA DC gate trigger current, 100A non-repetitive peak on-state current, and 800V repetitive peak reverse voltage. Ideal for applications requiring high surge current handling in small outline packages.
S6002CSRP
S6002CSRP by Littelfuse is a Silicon Controlled Rectifier with 1.5V max on-state voltage, 25A non-repetitive peak on-state current, and 600V repetitive peak reverse voltage. Ideal for applications requiring SCR trigger devices in small outline packages with surface mount capability.
TIC116C
Texas Instruments
TIC116C by Texas Instruments is a single SCR with max. DC gate trigger current of 20mA, non-repetitive peak on-state current of 80A, and max. on-state current of 8A. It is used in applications requiring high power control such as industrial motor drives and lighting systems due to its robust design and wide operating temperature range from -40°C to 110°C.
NYC0102BLT1G
Onsemi
NYC0102BLT1G by Onsemi is a SCR with max DC Gate Trigger Current of 0.2mA, Non Repetitive Peak On-state Current of 7A, and Repetitive Peak Reverse Voltage of 200V. It is used in applications requiring high current switching capabilities in compact spaces.
S4004DS1RP
S4004DS1RP by Littelfuse is a SCR with 30A non-repetitive peak on-state current, 2.5A max on-state current, and 0.05mA DC gate trigger current. Ideal for applications requiring high surge capability in compact designs such as power supplies and motor control systems.
SZNYC0102BLT1G
SCR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2N686A
2N686A by Texas Instruments is a Silicon Controlled Rectifier with max DC Gate Trigger Current of 40mA, Non Repetitive Peak On-state Current of 250A, and Max On-state Current of 18A. It operates b/w -60°C to 125°C and is ideal for applications requiring high current switching capabilities.
TIC67
TIC67 by Texas Instruments is a single SCR with 60V repetitive peak reverse voltage and 20A max RMS on-state current. It features a metal package body, solder lug terminal form, and post/stud mount package style. Ideal for applications requiring high power control in industrial equipment.
S1D
Hutson Industries
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Critical Rate of Rise of Off-state Voltage: 5 V/us;
SF0R3G42
Toshiba
The Toshiba SF0R3G42 SCR has a max DC gate trigger current of 0.2mA, on-state current of 0.3A, and off-state leakage current of 100uA. Ideal for applications requiring reliable switching at temperatures ranging from -40 to 125°C in plastic/epoxy packages with through-hole terminals.
S2025R
The Littelfuse S2025R is a single SCR with max DC gate trigger current of 35mA and max on-state current of 15A. It has a package style of flange mount and is ideal for applications requiring high power control in industrial settings. Operating temp range: -40 to 110°C.
BT151-650R,127
The NXP Semiconductors BT151-650R,127 is a single SCR with 650V repetitive peak off-state voltage and 100A non-repetitive peak on-state current. It has a max DC gate trigger current of 15mA and is ideal for applications requiring high power control in industrial equipment or motor drives.
2N1595
New Jersey Semiconductor Products
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Non Repetitive Peak On-state Current: 15 A;
MCC312-16IO1
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
TZ860N16KOFHPSA2
Infineon Technologies
TZ860N16KOFHPSA2 by Infineon Technologies is a single SCR with 1600V repetitive peak reverse voltage and 1500A max RMS on-state current. It is used in applications requiring high power control, such as industrial motor drives and power supplies. Operating temperatures range from -40°C to 125°C for versatile use.
70TPS16
International Rectifier
SCR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; JESD-609 Code: e0;
TS1220-600B
STMicroelectronics
The STMicroelectronics TS1220-600B is a single SCR with 12A max on-state current, 110A non-repetitive peak current, and 600V repetitive peak reverse voltage. It is used in applications requiring high power control such as motor drives and industrial automation due to its small outline package and surface-mount capability.
VS-ST380C06C0
Vishay Intertechnology
SCR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SKKT57/16E
Semikron International
Semikron International's SKKT57/16E is a Silicon Controlled Rectifier with 1500A non-repetitive peak on-state current. It features a max DC gate trigger current of 150mA and a repetitive peak reverse voltage of 1600V. Ideal for applications requiring high power handling capabilities in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2N1599
Asi Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Elements: 1;
Artesyn Technologies
SCR; Surface Mount: NO; Nominal Circuit Commutated Turn-off Time: 10 us; Repetitive Peak Off-state Voltage: 400 V; Maximum DC Gate Trigger Current: 10 mA; Maximum On-state Voltage: 2 V;
Space Power Electronics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Non Repetitive Peak On-state Current: 15 A; Maximum Leakage Current: 6 mA;
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Maximum On-state Current: 1.6 A; Maximum Operating Temperature: 125 Cel;
2N1599 by Texas Instruments is a SCR with 15A peak on-state current, 10mA gate trigger current, and 1.6A max on-state current. It is used in applications requiring reliable switching at temperatures ranging from -60°C to 125°C.
Fairchild Semiconductor
SCR; Surface Mount: NO; Nominal Circuit Commutated Turn-off Time: 10 us; JESD-609 Code: e0; Maximum DC Gate Trigger Current: 10 mA; Maximum Leakage Current: 6 mA;
Digitron Semiconductors
SCR; Surface Mount: NO; Minimum Operating Temperature: -60 Cel; Maximum DC Gate Trigger Current: 10 mA; Maximum Leakage Current: 6 mA; Non Repetitive Peak On-state Current: 15 A;
Solid State Devices
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum RMS On-state Current: 2.5 A;
Comset Semiconductors
SCR; Surface Mount: NO; Maximum DC Gate Trigger Current: 10 mA; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Voltage: 3 V; Maximum Leakage Current: 1 mA;
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Minimum Operating Temperature: -60 Cel; Maximum DC Gate Trigger Voltage: 3 V; Nominal Circuit Commutated Turn-off Time: 10 us;
Harris Semiconductor
SCR; Surface Mount: NO; Minimum Operating Temperature: -60 Cel; Maximum Leakage Current: 6 mA; JESD-609 Code: e0; Repetitive Peak Off-state Voltage: 400 V;
Hi-tron Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Terminal Form: WIRE; Minimum Operating Temperature: -60 Cel;
Motorola
Semitronics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Body Material: METAL;
Central Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Nominal Circuit Commutated Turn-off Time: 10 us;
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JEDEC-95 Code: TO-39;
Swampscott Electronics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Repetitive Peak Off-state Voltage: 400 V; No. of Terminals: 3;
Powerex
SCR; Surface Mount: NO; Maximum DC Gate Trigger Current: 10 mA; Maximum Operating Temperature: 125 Cel; Nominal Circuit Commutated Turn-off Time: 10 us; Maximum On-state Current: 1.6 A;
Semicoa
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved