Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Samtec IPBT-110-H1-T-D-K is a rectangular power connector with 20 contacts, made of copper alloy. It has a body length of 1.703" and width of 0.424", suitable for board mounting applications. With an operating temperature range from -55°C to 105°C, it is reliable for commercial use in various electronic devices.
Median Price
$2.750
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.440
100+ parts
$2.220
1k+ parts
$1.830
10k+ parts
$1.670
DigiKey
$2.670
$2.070
$1.690
$1.674
Sager
$2.130
$1.740
$1.600
Powell Electronics
$2.132
$1.741
-
Newark
$3.060
$2.460
$2.080
Samtec
$4.460
$3.090
$2.160
$1.190
Master Electronics
$3.050
$2.010
$1.900
Verical
$3.827
$2.396
TTI
$2.320
$1.760
Arrow
$1.780
$1.613
Nova Conductors
Bristol Electronics
$2.850
TME
$4.380
$3.140
$3.030
Electro Sonic
$4.590
$3.180
$1.230
IBS Electronics
$2.905
$2.425
$2.270
Vyrian
Prism Electronics
Argo Parts USA
Netroflash
$2.117
Continental Prestige Electronics
Authorized Procurement Solutions
Kepictronics
Perfect Parts
The longer body length allows for secure and stable connection between the power connectors.
This finish ensures durability and resistance to corrosion, making the connectors long-lasting.
Liquid crystal polymer insulator provides excellent electrical insulation properties and high temperature resistance.
The high maximum operating temperature ensures reliable performance even in high-temperature environments.
Having a total of 20 contacts allows for multiple power connections to be made simultaneously.
Board mounting type ensures easy installation and secure attachment to the circuit board.
Power Connectors IPBT-110-H1-T-D-K attributes and parameters. Explore more Power Connectors devices from Samtec
Additional Features:
Body Width:
Body Length:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
IPBT-110-H1-T-D-K Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - IPBT Series Core Out Features Added 06/Mar/2017
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Tesla Elektronicke Soucastky
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
1-770968-0
TE Connectivity
TE Connectivity's 1-770968-0 is a rectangular power connector with 4 contacts, rated for 600V and 9.5A signal current. Featuring matte tin finish, POLYAMIDE insulation, and brass contact material, it is ideal for board mounting applications requiring durability and reliability in temperatures ranging from -55 to 105°C.
39-01-3029
Molex
The Molex 39-01-3029 is a rectangular power connector with POLYAMIDE66 insulator material. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable crimp termination connectors with locking mounting options.
1-480424-0
TE Connectivity's 1-480424-0 is a rectangular power connector with a body length of 1.038in, insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. It is commonly used in power applications requiring a durable and reliable connection.
43045-2412
The Molex 43045-2412 is a rectangular power connector with 24 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. It has a body length of 1.561", suitable for board mounting applications with a dielectric voltage rating of 1500VAC. This durable connector, made from LCP material, operates b/w -40°C to +105°C and is ideal for commercial use cases requiring reliable power connections.
IPL1-102-01-L-S-K
The Samtec IPL1-102-01-L-S-K is a rectangular power connector with 2 contacts, rated at 7.5A signal current. It features liquid crystal polymer insulator, gold mating contact finish, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable board-mounted male connectors with solder termination.
39-31-0020
Molex 39-31-0020 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring POLYAMIDE66 insulator material, it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and UL94V-0 flammability rating.
105309-1103
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
178740-9
TE Connectivity's 178740-9 is a rectangular power connector with insulation resistance of 100MΩ, dielectric voltage withstand of 2200VAC, and operating temperature range from -30 to 105°C. Ideal for commercial applications, this male connector features crimp termination and panel mounting.
1-350344-0
TE Connectivity 1-350344-0 is a rectangular power connector with POLYAMIDE insulator. It has 0.95"x.275"x.815" dimensions, operates b/w -55 to 105°C, and UL 94V-2 flammability rating. Ideal for cable mounting applications requiring crimp termination and accommodating 115/230VAC mains connectors.
39-29-6188
Molex 39-29-6188 is a rectangular power connector with 18 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
VHR-6N
J S T Mfg
VHR-6N by J S T Mfg is a board connector with 6 female contacts, made of POLYAMIDE6. It has dimensions of 0.933" x 0.413" x 0.524" and operates b/w -25°C to 85°C. Ideal for power applications, it features crimp termination and UL94V-0 flammability rating.
YLP-02V(NN)
YLP-02V(NN) by J S T Mfg is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. Featuring 2 contacts, it has a 94V-0 UL Flammability Code. Ideal for CABLE mounting, CRIMP termination, and FEMALE contact gender in PLUG body style applications.
1723104107
Molex 1723104107 Power Connector features Liquid Crystal Polymer insulator, 105°C max operating temp, and -40°C min operating temp. Ideal for board mounting applications with 7 contacts and SQ PIN-SKT male contact style.
39-01-3048
Molex 39-01-3048 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It has a body size of 0.457" x 0.457" x 0.772" and features crimp termination for cable mounting. Ideal for commercial applications requiring reliable female connectors with locking mounting option.
39-30-1062
Molex 39-30-1062 is a rectangular power connector with 6 contacts, gold-plated brass material, and 0.165" mating contact pitch. It has a durability of 30 cycles and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and dielectric voltage withstand capabilities up to 1500VAC.
10153466-04LF
Amphenol Communications Solutions
10153466-04LF by Amphenol is a rectangular power connector with POLYAMIDE66 insulator material. It has 4 contacts, operates b/w -40 to 105°C, and meets UL standards. Ideal for cable mounting applications, featuring female contact gender and crimp termination for reliable connections.
M80-5000000M1-02-PM1-00-000
Harwin Plc
POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
1722581104
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
39-30-0060
Molex 39-30-0060 is a rectangular power connector with 6 contacts, featuring insulation resistance of 1Gohm and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications, it has a durable design with male contact gender and solder termination type.
1648208-1
TE Connectivity's 1648208-1 is a RECTANGULAR POWER CONNECTOR with 29 contacts, rated at 35A and 250V. Insulated with GLASS FILLED POLYETHYLENE, it operates b/w -40 to 105 °C. Ideal for CABLE mounting applications, this connector offers high durability and reliability under commercial standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPBT-105-H2-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
IPBT-105-H2-T-D
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
IPBT-105-H2-T-D-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
IPBT-102-H1-T-S-RA-K
The Samtec IPBT-102-H1-T-S-RA-K is a rectangular power connector with liquid crystal polymer insulator. It has 2 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting in commercial applications requiring reliable power connections.
IPBT-102-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; JESD-609 Code: e3; IEC Conformity: NO;
IPBT-102-H1-T-S-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .259 inch;
IPBT-102-H1-T-S-RA-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Empty Shell: NO; MIL Conformity: NO;
IPBT-110-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Manufacturer Series: IPBT; Termination Contact Finish: TIN OVER NICKEL;
IPBT-102-H1-T-D-RA-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPBT-102-H2-T-S-K
Samtec's IPBT-102-H2-T-S-K is a rectangular power connector with 2 contacts. It features copper alloy contacts with matte tin over nickel finish. Ideal for board mounting applications requiring male contact gender and liquid crystal polymer insulator material.
IPBT-102-H2-T-S-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; DIN Conformance: NO;
IPBT-105-H1-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105;
IPBT-108-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: TIN OVER NICKEL; Manufacturer Series: IPBT;
IPBT-104-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; MIL Conformity: NO; Termination Contact Finish: TIN OVER NICKEL;
IPBT-104-H2-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
IPBT-115-H1-T-D
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: MATTE TIN OVER NICKEL (50);
IPBT-115-H2-T-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SURFACE MOUNT;
IPBT-103-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPBT-103-H1-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: .548 inch;
IPBT-110-H1-TM-D-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: CSA, UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved