Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's IPBT-102-H1-T-D-RA-K is a power connector with 4 contacts. It features Tin (Sn) finish with Nickel (Ni) barrier, Liquid Crystal Polymer insulator, and Copper Alloy contact material. Ideal for board mounting applications requiring male gender connectors with solder termination.
Median Price
$1.500
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Avnet
1+ parts
$1.307
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$1.330
$1.080
$1.050
$0.968
Farnell
$1.450
$0.999
$0.861
DigiKey
$1.160
$0.940
Samtec
$0.680
Arrow
$1.535
$1.187
$0.962
$0.850
Sager
$1.550
$1.200
$0.896
Powell Electronics
$0.970
Element14
$2.180
$1.690
$1.370
Chip1Stop
$2.500
TTI
$0.980
$0.920
Verical
Master Electronics
$1.353
$0.909
$0.868
Nova Conductors
$1.656
Electro Sonic
$1.784
$1.299
$0.923
IBS Electronics
$1.088
Vyrian
A2Z Electronics, Inc.
Bristol Electronics
Corohmni
$1.214
Argo Parts USA
Continental Prestige Electronics
$1.780
$1.400
$0.981
Aztec Data Supply Inc.
$5.577
Eastek
$26.280
Authorized Procurement Solutions
Kepictronics
GreenTree Electronics
Perfect Parts
The use of Tin with Nickel barrier provides excellent conductivity and corrosion resistance, ensuring reliable performance over time.
Liquid Crystal Polymer is known for its high temperature resistance and excellent electrical properties, making it ideal for power connectors that may experience heat and electrical stress.
Being specifically designed for power applications, this connector can handle higher current and voltage levels compared to general purpose connectors.
Copper alloy contacts offer superior conductivity, ensuring minimal power loss and reliable electrical connections.
The matte Tin finish over Nickel provides a low contact resistance and durable surface, enhancing the overall reliability of the mating process.
Having 4 contacts allows for the transmission of multiple power signals, enabling more versatile use within a single connector.
The board mounting type allows for easy and secure installation on circuit boards, ensuring stability and reliability in the connection.
Solder termination provides a strong and permanent connection, ensuring minimal resistance and reliable performance even under harsh operating conditions.
The male gender design of the contacts ensures compatibility with corresponding female connectors, providing a secure and stable connection.
Power Connectors IPBT-102-H1-T-D-RA-K attributes and parameters. Explore more Power Connectors devices from Samtec
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
IPBT-102-H1-T-D-RA-K Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
172298-1210
Molex
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
0430450818
Molex 0430450818 is a rectangular power connector with 8 contacts made of brass. It features surface mount termination and polyethylene insulator material. Ideal for board mounting applications requiring male contact gender with TIN over nickel finish.
1954289-3
TE Connectivity's 1954289-3 is a rectangular power connector with a dielectric voltage of 1500VAC and a rated current of 6A. It is commonly used in power applications, offering a surface mount termination type and a right angle mounting style.
1376389-1
TE Connectivity's 1376389-1 is a rectangular power connector with insulator material GLASS FILLED POLYAMIDE66. Featuring a rated current of 10A, it has an insulation resistance of 500MΩ and operates b/w -30 to 105°C. Ideal for cable mounting applications, this female connector offers durability with 25 cycles.
39-01-2026
Molex 39-01-2026 is a rectangular power connector with POLYAMIDE insulator, UL 94V-0 flammability rating, and 2 contacts. It operates b/w -40 to 105°C, withstands up to 2200VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring durable crimp termination in panel mounting setups.
2334570-4
TE Connectivity's 2334570-4 is a rectangular power connector with 31 contacts, UL-rated for 100A signal current. Featuring glass-filled liquid crystal polymer insulator, it operates b/w -40 to 125°C. Ideal for board mounting applications requiring high current connections in industrial settings.
39-03-9062
Power Connectors; Termination Contact Finish: NOT APPLICABLE; Maximum Operating Temperature (Cel): 105; Minimum Operating Temperature: -40 Cel; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
428193213
Molex 428193213 power connector features 1.33" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage withstand. Ideal for commercial applications with -40 to 105°C operating range, UL-rated with matte tin finish and brass contacts for reliable signal current up to 50A on a single male connector.
34576-0703
Molex 34576-0703 is a RECTANGULAR POWER CONNECTOR with 56 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in applications requiring high-power connections.
1-480699-0
TE Connectivity 1-480699-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 2 contacts, operates b/w -55 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring durable power connections.
IPD1-06-D-K-R
The Samtec IPD1-06-D-K-R is a RECTANGULAR POWER CONNECTOR with 12 contacts, POLYAMIDE66 shell material, and FEMALE crimp termination. Ideal for power applications requiring secure cable mounting.
2002411124
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
39-01-4031
Molex 39-01-4031 is a rectangular power connector with 3 contacts, made of POLYAMIDE insulator material. It has a dielectric voltage rating of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability compliance.
1-640507-0
TE Connectivity 1-640507-0 is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 250V and 9A. Made of POLYAMIDE66, it has a body size of 1.06"x0.51"x0.29" and operates b/w -55°C to 85°C. Ideal for power applications requiring secure crimp termination in panels with wire sizes ranging from 26 AWG to 18 AWG.
2-794617-4
TE Connectivity 2-794617-4 is a Power Connector with 24 contacts, rated at 250V and 5A. Featuring POLYAMIDE66 insulator material, it has a mating contact pitch of 0.118" and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable power connections.
172298-1304
Molex 172298-1304 is a RECTANGULAR POWER CONNECTOR with LIQUID CRYSTAL POLYMER insulator. Featuring 4 contacts, it has UL 94V-0 flammability rating and SOLDER termination. Ideal for BOARD mounting, this connector is commonly used in power applications.
43650-0409
The Molex 43650-0409 is a rectangular power connector with 4 contacts, featuring bright tin termination finish and glass-filled liquid crystal polymer insulator. With a rated current of 8.5A, it operates b/w -40 to 105°C, making it ideal for commercial applications requiring reliable power connections in tight spaces.
BACA-AMP-150
TE Connectivity's BACA-AMP-150 is a rectangular power connector with POLYAMIDE insulator. It has 2 contacts, operates b/w -55 to 105°C, and offers high insulation resistance of 1GΩ. Ideal for commercial applications requiring durable crimp termination at 6.35mm pitch.
15-06-0100
Molex 15-06-0100 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 10 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring reliable power connections in panels with solder termination.
43650-0327
The Molex 43650-0327 is a rectangular power connector with 3 contacts, rated at 8.5A signal current. Featuring LCP insulator material, it has a mating contact pitch of 0.118" and dielectric voltage of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPBT-105-H2-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
IPBT-105-H2-T-D
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
IPBT-105-H2-T-D-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
IPBT-102-H1-T-S-RA-K
The Samtec IPBT-102-H1-T-S-RA-K is a rectangular power connector with liquid crystal polymer insulator. It has 2 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting in commercial applications requiring reliable power connections.
IPBT-102-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; JESD-609 Code: e3; IEC Conformity: NO;
IPBT-102-H1-T-S-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .259 inch;
IPBT-102-H1-T-S-RA-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Empty Shell: NO; MIL Conformity: NO;
IPBT-110-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Manufacturer Series: IPBT; Termination Contact Finish: TIN OVER NICKEL;
IPBT-102-H2-T-S-K
Samtec's IPBT-102-H2-T-S-K is a rectangular power connector with 2 contacts. It features copper alloy contacts with matte tin over nickel finish. Ideal for board mounting applications requiring male contact gender and liquid crystal polymer insulator material.
IPBT-102-H2-T-S-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; DIN Conformance: NO;
IPBT-110-H1-T-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .424 inch;
IPBT-105-H1-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105;
IPBT-108-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: TIN OVER NICKEL; Manufacturer Series: IPBT;
IPBT-104-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; MIL Conformity: NO; Termination Contact Finish: TIN OVER NICKEL;
IPBT-104-H2-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
IPBT-115-H1-T-D
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: MATTE TIN OVER NICKEL (50);
IPBT-115-H2-T-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SURFACE MOUNT;
IPBT-103-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPBT-103-H1-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: .548 inch;
IPBT-102-H1-T-D
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved