Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM SML-E12P8WT86 is a 1.2mm SINGLE COLOR LED with 0.02A forward current, emitting PURE GREEN light at 6.3mcd intensity. Ideal for surface mount applications in electronics, it operates b/w -40 to 85°C temperatures and has a max reverse voltage of 5V.
Median Price
$0.132
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.250
100+ parts
$0.120
1k+ parts
$0.088
10k+ parts
$0.070
Newark
$0.393
$0.143
$0.080
-
Chip1Stop
$0.073
$0.057
Farnell
$0.127
$0.085
Element14
$0.125
Verical
$0.136
Cyclops Electronics Ltd
Chip Stock
NAC Semi
$0.071
Inventory MP
Bristol Electronics
Elcom Components
ACDS - Activité Composants Distribution Service
Nova Conductors
Prism Electronics
Ampacity Inc.
$0.055
CoreStaff
$0.339
$0.096
$0.072
Corohmni
$0.626
Aztec Data Supply Inc.
$0.689
Perfect Parts
Computer Components Inc. - USA
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Epart123
$0.110
Authorized Procurement Solutions
Eastek
$0.060
GreenTree Electronics
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Single configuration makes it easy to integrate into circuit designs with limited space.
Compact size allows for versatile placement in a variety of electronic devices.
Low forward current consumption helps in energy efficiency and prolonging the lifespan of the LED.
Diffused milky white lens provides even light distribution and reduces glare, making it suitable for various applications.
Being a single color LED simplifies the design process and ensures consistency in the emitted light.
Having only 2 terminals simplifies the connection process, making it user-friendly.
High maximum operating temperature ensures reliability in various environmental conditions.
Low height profile allows for slim and compact designs.
Rectangular shape provides a wide beam angle for better light dispersion.
Low minimum operating temperature ensures functionality even in extreme cold temperatures.
Gold over nickel terminal finish provides excellent conductivity and corrosion resistance.
Green color wavelength is visually appealing and suitable for various applications.
Pure green color emission provides consistent and vibrant lighting.
TR, 7-inch packing method ensures easy handling and storage.
High maximum reverse voltage rating protects the LED from damage.
Optimal terminal pitch for ease of soldering and connection in circuit boards.
Moderate luminous intensity provides a balance between brightness and energy efficiency.
Surface mount design simplifies the installation process and saves space.
Visible LEDs SML-E12P8WT86 attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
SML-E12P8WT86 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Uniohm
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rugao Dachang Electronic
HLMP3962
Three-five Systems
HLMP3962 by Three-five Systems is a visible LED with peak wavelength of 565nm, max forward current of 0.03A, and diffused lens type. Ideal for applications requiring green light emission with a viewing angle of 75°. Operates b/w -20°C to 100°C, making it versatile for various lighting needs.
APT1608SRCPRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
VLMC3100-GS08
Vishay Intertechnology's VLMC3100-GS08 is a 2.4mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
HLMP-1719
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
XHP35B-00-0000-0D0BE240E
Wolfspeed
SINGLE COLOR LED;
HLMP-1301-101F
Dialight
The Dialight HLMP-1301-101F is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and nominal luminous intensity of 13.8mcd. Ideal for applications requiring a red light source, such as indicator lights in electronic devices or automotive lighting systems.
HLMP-4700
Fairchild Semiconductor
HLMP-4700 by Fairchild Semiconductor is a 5mm single color LED with a peak wavelength of 635nm and a max forward current of 0.0075A. It is commonly used in applications that require high efficiency red light emission, such as indicator lights or displays.
HLMP-1503
Fairchild Semiconductor's HLMP-1503 is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
SML-522MU8WT86
ROHM
ROHM's SML-522MU8WT86 is a 1.3mm dual-color LED with separate elements, featuring max forward current of 0.02A and nominal luminous intensity of 63.0/40.0 mcd. Ideal for surface mount applications in visible LED category, it emits red/yellow-green light with milky white lens, suitable for temperatures ranging from -40 to 85°C.
550-3005F
Dialight's 550-3005F is a 5mm dual-color LED with common bipolar terminal, max. forward current of 0.04A, and peak wavelengths of 660nm/565nm. Ideal for applications requiring diffused white light output in a radial mount configuration with red/green colors at 60° viewing angle.
L-7104EC
Kingbright Electronic
The Kingbright Electronic L-7104EC is a 3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices. With WATER CLEAR lens type, it offers a viewing angle of 34° and nominal luminous intensity of 60.0mcd.
OVS-0808
SPC TECHNOLOGY/ MULTICOMP
OVS-0808 LED by Spc Technology/ Multicomp is a 1.4mm WATER CLEAR single color LED with 0.03A forward current, emitting SUPER BRIGHT RED light at 130° viewing angle. Ideal for surface mount applications, it operates b/w -30 to 80 °C and has a luminous intensity of 300.0 mcd.
XHP35B-00-0000-0D0BE20E3
Cree Led
HLMP1700
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Height: 4.3 mm; Peak Wavelength (nm): 635; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .007 A;
150060BS55040
Wuerth Elektronik & Kg
150060BS55040 by Wurth Elektronik is a 1mm blue LED with a peak wavelength of 465nm. It has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring a single color LED with diffused lens, such as indicator lights in electronic devices.
XHP35B-00-0000-0D0HC430E
QS123XXHG220
Apem Components
Visible LEDs;
3153
Nte Electronics
The Nte Electronics 3153 is a single color LED array with 5 separate elements, each with a peak wavelength of 700nm. With a max forward current of 0.025A and nominal luminous intensity of 0.4mcd, it is ideal for applications requiring red light emission in a compact 4.99mm size package.
ASMB-MTB1-0B3A2
Broadcom
ASMB-MTB1-0B3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring peak wavelengths of 634/522/465nm and diffused lens. With max forward current of 0.025A, it offers red/green/blue colors and surface mounting for applications requiring high luminous intensity up to 2675mcd at a viewing angle of 115°.
HSMS-C170
HSMS-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light emission in surface mount configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMLE12BC7TT86
ROHM's SMLE12BC7TT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 22.0mcd. Ideal for applications requiring blue light emission in compact electronic devices due to its small size and surface mounting feature.
SMLE12BC7TT86Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 46.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SMLE13EC8TT86
ROHM's SMLE13EC8TT86 is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting GREEN light at 120.0mcd intensity. Ideal for surface mount applications in electronics due to its compact size and colorless transparent lens. Operating range from -40°C to 85°C makes it suitable for various environments.
SML-E12UWT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-E12M8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLE12BC7TT86N
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 18.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SMLE13EC8TT86S
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 115.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-E12DWT86
ROHM's SML-E12DWT86 is a 1.2mm SINGLE COLOR LED with diffused milky white lens emitting ORANGE light at 200.0mcd intensity. It operates b/w -30 to 85°C, with max forward current of 0.025A, making it ideal for surface mount applications requiring compact and efficient lighting solutions.
SMLE12WBC7W1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 71.0; Terminal Finish: GOLD OVER NICKEL; Shape: RECTANGULAR;
SMLE12WBC7W1AR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 73.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLEN3EC8TT86
ROHM SMLEN3EC8TT86 is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and forward voltage of 3V. Ideal for surface mount applications, it operates b/w -40 to 85°C, emitting green light with luminous intensity of 140mcd.
SML-E12U8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLE13WBC8W1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLEN3WBC8W1
ROHM's SMLEN3WBC8W1 is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens, ideal for surface mount applications. It has a max forward current of 0.01A and nominal luminous intensity of 120.0mcd, operating b/w -40 to 85°C temperatures.
SMLE13BC8TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-E12V8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLEN3BC8TT86
SML-E12P8WT87J
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.25; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-E12P8WT87L
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.15; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-E12P8WT87MP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved