Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SMLE12WBC7W1AR is a 1.2mm SINGLE COLOR LED with milky white lens, emitting WHITE light at 73.0mcd intensity. Ideal for surface mount applications, it has a max forward current of 0.02A and operates b/w -30°C to 85°C temperature range.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Corohmni
$0.302
Aztec Data Supply Inc.
$0.770
Ampacity Inc.
$2.100
Semicontronic
$11.100
$10.822
$10.767
AZTECH Wire
$16.403
Continental Prestige Electronics
iodParts Technologies Inc.
Argo Parts USA
Bastille Electronics
Single configuration makes it easy to use and integrate into various applications.
Compact size allows for flexibility in design and placement.
Low power consumption for energy efficiency.
Milky white lens provides a soft and diffused light output.
Single color LED for consistent and uniform illumination.
High operating temperature range for versatility in different environments.
Wide temperature range allows for use in various conditions.
Gold over nickel finish ensures good conductivity and durability.
White color output for bright and clear illumination.
Low reverse voltage for added safety and protection.
High luminous intensity for better visibility and brightness.
Surface mount design for easy and secure installation.
Visible LEDs SMLE12WBC7W1AR attributes and parameters. Explore more Visible LEDs devices from ROHM
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
SMLE12WBC7W1AR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Mult Dev EOL 1/Oct/2021 Mult Dev OBS-Add 1/Oct/2021
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Sangdest Microelectronics (Nanjing)
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
Dc Components
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
HSMH-C191
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
QTLP650C-7.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
L-934GD-5V
Kingbright Electronic
L-934GD-5V by Kingbright Electronic is a 3mm green LED with peak wavelength of 565nm and viewing angle of 60°. It has max forward current of 0.025A, ideal for indicator lights in electronic devices due to its diffused lens and nominal luminous intensity of 20.0mcd.
550-0405F
Dialight
Dialight 550-0405F is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.04A and viewing angle of 60°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
XHP35B-H0-0000-0D0HC440G
Cree Led
SINGLE COLOR LED;
L-7104EC
Kingbright
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 627;
597-2503-507F
Dialight's 597-2503-507F is a single color LED with water clear lens. It has a size of 1.2mm and max forward current of 0.02A. Ideal for surface mount applications, it offers a viewing angle of 135° and nominal luminous intensity of 25.0 mcd in yellow-green color.
HSMG-C150
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: DIFFUSED; Size: 2 mm;
KPT-2012CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Packing Method: TR;
150060RS75000
Wuerth Elektronik & Kg
150060RS75000 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and forward current of 0.03A. With water clear lens, it has a viewing angle of 140° and nominal luminous intensity of 250.0mcd. Ideal for surface mount applications in various electronic devices due to its compact size and red color output.
Broadcom
HSMH-C191 by Broadcom is a 1mm single color LED with peak wavelength of 660nm. With max forward current of 0.025A, it offers red light at 170° viewing angle. Ideal for surface mount applications, operating b/w -40 to 85 °C temperatures.
597-5111-407F
Dialight's 597-5111-407F is a single color LED with peak wavelength of 660nm, forward current of 0.025A, and forward voltage of 2.3V. Ideal for surface mount applications, it emits red light with diffused white lens in a rectangular shape.
SML-D12U8WT86C
ROHM
ROHM's SML-D12U8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it has a red color, luminous intensity of 63.0mcd, and operates b/w -40 to 85°C temperature range.
LSGT676-P7R-1-0+N7P9-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7R-1-0+N7P9-24 is a dual-color LED with peak wavelengths of 645nm (super red) and 572nm (green). It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 118.0/68.0 mcd. Ideal for surface mount applications in electronics requiring separate red and green light sources.
OVM12F3W7
Tt Electronics Plc
KP-1608CGCK
Kingbright Electronic's KP-1608CGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 574nm, max forward current of 0.03A, and water clear lens. Ideal for applications requiring green light emission in compact spaces due to its small size and surface mounting feature.
LTST-C190KGKT
Lite-on Technology
LTST-C190KGKT by Lite-on Technology is a 1.1mm GREEN LED with peak wavelength of 574nm, suitable for surface mount applications. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for low-power indicator lights in electronic devices. Operating temperature ranges from -30 to 85 °C.
KP-2012QBC-D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 468;
HLMP-1301-E00A1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
553-0133-200F
Dialight's 553-0133-200F is a 3mm LED array with separate, 2-element configuration. It has a peak wavelength of 585/565nm and max forward current of 0.02A. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMLE12BC7TT86
ROHM's SMLE12BC7TT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 22.0mcd. Ideal for applications requiring blue light emission in compact electronic devices due to its small size and surface mounting feature.
SMLE12BC7TT86Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 46.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SMLE13EC8TT86
ROHM's SMLE13EC8TT86 is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting GREEN light at 120.0mcd intensity. Ideal for surface mount applications in electronics due to its compact size and colorless transparent lens. Operating range from -40°C to 85°C makes it suitable for various environments.
SML-E12UWT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-E12M8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLE12BC7TT86N
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 18.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SMLE13EC8TT86S
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 115.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-E12DWT86
ROHM's SML-E12DWT86 is a 1.2mm SINGLE COLOR LED with diffused milky white lens emitting ORANGE light at 200.0mcd intensity. It operates b/w -30 to 85°C, with max forward current of 0.025A, making it ideal for surface mount applications requiring compact and efficient lighting solutions.
SMLE12WBC7W1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 71.0; Terminal Finish: GOLD OVER NICKEL; Shape: RECTANGULAR;
SML-E12P8WT86
ROHM SML-E12P8WT86 is a 1.2mm SINGLE COLOR LED with 0.02A forward current, emitting PURE GREEN light at 6.3mcd intensity. Ideal for surface mount applications in electronics, it operates b/w -40 to 85°C temperatures and has a max reverse voltage of 5V.
SMLEN3EC8TT86
ROHM SMLEN3EC8TT86 is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and forward voltage of 3V. Ideal for surface mount applications, it operates b/w -40 to 85°C, emitting green light with luminous intensity of 140mcd.
SML-E12U8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLE13WBC8W1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLEN3WBC8W1
ROHM's SMLEN3WBC8W1 is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens, ideal for surface mount applications. It has a max forward current of 0.01A and nominal luminous intensity of 120.0mcd, operating b/w -40 to 85°C temperatures.
SMLE13BC8TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-E12V8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLEN3BC8TT86
SMLE12WBC7WT86Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 46.0; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SMLE12WBC7WT87Q
SMLE12WBC7WT87R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 73.0; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved