Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SML-E12U8WT86 is a 1.2mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 63.0mcd luminous intensity. Ideal for surface mount applications in electronics, it operates b/w -40°C to 85°C temperatures and has a max reverse voltage of 5V.
Median Price
$0.169
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.250
100+ parts
$0.118
1k+ parts
$0.082
10k+ parts
$0.067
DigiKey
$0.120
$0.088
$0.070
Newark
$0.258
$0.123
$0.091
-
Verical
$0.156
$0.144
Farnell
$0.104
$0.072
Element14
$0.117
Chip1Stop
Nova Conductors
$0.084
Chip Stock
ACDS - Activité Composants Distribution Service
Cyclops Electronics Ltd
Vyrian
Goldney Electronics S.L.
Prism Electronics
Ampacity Inc.
$0.073
Argo Parts USA
Netroflash
$0.080
$0.079
CoreStaff
$0.197
$0.162
$0.081
$0.075
Continental Prestige Electronics
$0.316
$0.109
$0.056
Corohmni
$0.589
Aztec Data Supply Inc.
$0.772
RC Electronics
Perfect Parts
Kepictronics
GreenTree Electronics
Authorized Procurement Solutions
Having a single configuration simplifies the design and setup process, making it easier to integrate into various projects.
The small size allows for precise placement and compact designs, ideal for applications where space is limited.
With a low maximum forward current, this LED is energy-efficient and can help reduce overall power consumption.
The diffused milky white lens provides uniform light distribution and reduces glare, making it suitable for various lighting applications.
Being a single color LED simplifies color control and makes it easier to achieve consistent lighting effects.
With a high maximum operating temperature, this LED can withstand elevated temperatures, ensuring reliability in harsh environmental conditions.
The rectangular shape offers versatility in placement and can be easily integrated into different designs or arrays.
The low minimum operating temperature allows for reliable performance even in cold environments, expanding the range of applications for this LED.
The gold over nickel terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and performance.
The red color offers a classic and versatile option for various lighting and signaling applications.
Visible LEDs SML-E12U8WT86 attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
SML-E12U8WT86 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
Eic Semiconductor
Plessey Semiconductors Discrete Components Div
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
HSMG-C150
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.5; Lens Type: DIFFUSED; Color: GREEN;
HLMP-1719-A00A2
Broadcom
HLMP-1719-A00A2 by Broadcom is a 3mm single color LED with peak wavelength of 583nm. With max forward current of 0.007A, it emits yellow light at 2.1mcd luminous intensity. Ideal for applications requiring a round, tinted diffused lens in bulk packaging.
APG1608CGKC/T
Kingbright Electronic
APG1608CGKC/T by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 574nm and max forward current of 0.03A. Ideal for applications requiring GREEN light, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
S4WM-2296409051-0E000K3S-00001
Seoul Semiconductor
Seoul Semiconductor's S4WM-2296409051-0E000K3S-00001 is a 22mm COB LED with max. forward current of 1.85A and voltage of 50.7V. Ideal for surface mount applications, it emits neutral white light at a wide 118° viewing angle, suitable for various lighting designs.
HSMH-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Maximum Forward Current: .025 A;
HLMP-4000#002
HLMP-4000#002 by Broadcom is a 5mm dual color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/568nm. Ideal for applications requiring high efficiency red/green illumination in a radial mount setup.
KP-1608SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
HLMP-1700-B0002
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-3001-207F
Dialight
Dialight's 597-3001-207F is a single color LED with peak wavelength of 630nm, forward current of 0.03A, and forward voltage of 2.8V. Ideal for applications requiring red light emission, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
HLMP4740
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Maximum Forward Voltage: 2.2 V; Maximum Forward Current: .007 A;
HLMP1301
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
SML-310VTT86
ROHM's SML-310VTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 610nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for surface mount applications requiring a colorless transparent lens, it operates b/w -30°C to 85°C, emitting red light at 4V reverse voltage.
HLMP-6300-F0011
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
19-217/R6C-AL1M2VY/3T
Everlight Electronics
The Everlight Electronics 19-217/R6C-AL1M2VY/3T is a 1mm SINGLE COLOR LED with peak wavelength of 632nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring brilliant red light emission, such as indicator lights in electronic devices.
KPHHS-1005SURCK
KPHHS-1005SURCK by Kingbright Electronic is a 0.8mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.03A and viewing angle of 120°. Ideal for applications requiring hyper red light emission in compact spaces.
LTST-C191KGKT-5A
Lite-on Technology
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
L-7104EC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 627;
HLMP-1503-D0002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMF-C113
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
150141M173100
Wuerth Elektronik & Kg
Wurth Elektronik's 150141M173100 is a COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 635/515/465 nm. It has a max forward current of 0.03 A and viewing angle of 120°. Ideal for applications requiring RGB color mixing in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMLE12BC7TT86
ROHM's SMLE12BC7TT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 22.0mcd. Ideal for applications requiring blue light emission in compact electronic devices due to its small size and surface mounting feature.
SMLE12BC7TT86Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 46.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SMLE13EC8TT86
ROHM's SMLE13EC8TT86 is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting GREEN light at 120.0mcd intensity. Ideal for surface mount applications in electronics due to its compact size and colorless transparent lens. Operating range from -40°C to 85°C makes it suitable for various environments.
SML-E12UWT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-E12M8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLE12BC7TT86N
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 18.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SMLE13EC8TT86S
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 115.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-E12DWT86
ROHM's SML-E12DWT86 is a 1.2mm SINGLE COLOR LED with diffused milky white lens emitting ORANGE light at 200.0mcd intensity. It operates b/w -30 to 85°C, with max forward current of 0.025A, making it ideal for surface mount applications requiring compact and efficient lighting solutions.
SMLE12WBC7W1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 71.0; Terminal Finish: GOLD OVER NICKEL; Shape: RECTANGULAR;
SMLE12WBC7W1AR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 73.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-E12P8WT86
ROHM SML-E12P8WT86 is a 1.2mm SINGLE COLOR LED with 0.02A forward current, emitting PURE GREEN light at 6.3mcd intensity. Ideal for surface mount applications in electronics, it operates b/w -40 to 85°C temperatures and has a max reverse voltage of 5V.
SMLEN3EC8TT86
ROHM SMLEN3EC8TT86 is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and forward voltage of 3V. Ideal for surface mount applications, it operates b/w -40 to 85°C, emitting green light with luminous intensity of 140mcd.
SMLE13WBC8W1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLEN3WBC8W1
ROHM's SMLEN3WBC8W1 is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens, ideal for surface mount applications. It has a max forward current of 0.01A and nominal luminous intensity of 120.0mcd, operating b/w -40 to 85°C temperatures.
SMLE13BC8TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-E12V8WT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SMLEN3BC8TT86
SML-E12U8WT86Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 51.5; Lens Type: MILKY WHITE; Terminal Finish: GOLD OVER NICKEL;
SML-E12U8WT86R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-E12U8WT87P
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 32.5; Lens Type: MILKY WHITE; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved