Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Maximum Forward Current: .075 A; Shape: ROUND; Nominal Output Power: 10 W;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
LIBRA Elektronik GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
$0.126
$0.121
Northwest PG Solutions
$0.138
$0.122
Laser Diodes HL6334MG attributes and parameters. Explore more Laser Diodes devices from Renesas Electronics
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Nominal Output Power:
Peak Wavelength (nm):
Semiconductor Material:
Shape:
Size:
Sub-Category:
Maximum Threshold Current:
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
Promax-johnton
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
Boca Semiconductor
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
TOLD9211(F)
Toshiba
LASER DIODE; Nominal Output Power: 5 W; Peak Wavelength (nm): 670; No. of Functions: 1;
NX8567SAS318-BC
Renesas Electronics
LASER DIODE; Maximum Forward Current: .15 A; Peak Wavelength (nm): 1531; Maximum Response Time: .000000000125 s; Maximum Forward Voltage: 2 V; Maximum Operating Temperature: 70 Cel;
TOLD310
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 1310; Maximum Response Time: .0000000003 s; Minimum Operating Temperature: -10 Cel; Maximum Forward Voltage: 1.5 V;
NX8566LE287-CC
LASER DIODE; Maximum Forward Voltage: 2 V; Maximum Forward Current: .15 A; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 1529; Maximum Operating Temperature: 70 Cel;
TOLD320ABC
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Forward Current: .15 A; Semiconductor Material: InGaAs; Maximum Operating Temperature: 70 Cel;
NX8571SC602-BA
LASER DIODE; Minimum Operating Temperature: -5 Cel; Maximum Forward Voltage: 2.5 V; Maximum Operating Temperature: 70 Cel; Maximum Forward Current: .3 A; Semiconductor Material: InGaAsP;
NX8565LE493-CC
LASER DIODE; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .1 A; Maximum Response Time: .000000000125 s; Minimum Operating Temperature: -20 Cel; Maximum Forward Voltage: 2 V;
SDL8033-201
SDL8033-201 by Onsemi is an 875nm LASER DIODE with GaAlAs material. It operates b/w -10 °C to 50°C, suitable for THROUGH HOLE MOUNT applications like optical sensors and medical devices.
TOLD322ABA
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .000000001 s; Maximum Forward Current: .15 A; Minimum Operating Temperature: -10 Cel; Maximum Forward Voltage: 1.5 V;
TOLD70
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 50 Cel; Maximum Forward Current: .15 A; JESD-609 Code: e0;
CQF25B/D24
CQF25B/D24 by NXP Semiconductors is a high-performance laser diode with a peak wavelength of 850 nm and a max forward current of 0.15 A. It operates efficiently b/w -10 °C to 60 °C, making it ideal for various optoelectronic applications. With an ultra-fast response time of 0.5 ns, it's perfect for data communication systems.
TOLD9443MD
LASER DIODE; Maximum Threshold Current: 65 mA; Nominal Output Power: 10 W; No. of Functions: 1; Peak Wavelength (nm): 650; Configuration: SINGLE WITH BUILT-IN PHOTO DIODE;
TOLD9220(S)
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel; Peak Wavelength (nm): 660;
SDL9902-001
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 830;
NX8567SAM589-CC
LASER DIODE; Minimum Operating Temperature: -5 Cel; Maximum Forward Voltage: 2 V; Maximum Forward Current: .15 A; Maximum Response Time: .000000000125 s; Peak Wavelength (nm): 1558;
NX8565LE389-CC
LASER DIODE; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 70 Cel; Peak Wavelength (nm): 1539; Maximum Forward Current: .1 A; Maximum Response Time: .000000000125 s;
54-00152
Viavi Solutions
Viavi Solutions' 54-00152 Laser Diode operates at peak wavelength of 810nm with spectral bandwidth of 3m. It can withstand temperatures from -20°C to 50°C, featuring through hole mounting. Ideal for applications requiring precise laser emission in optoelectronics and telecommunications.
TOLD152R
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 50 Cel; Maximum Forward Current: .095 A; Minimum Operating Temperature: -10 Cel; Peak Wavelength (nm): 810;
TOLD9321(F)
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 660; Semiconductor Material: GaAlInP; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 50 Cel;
TOLD323BAC
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 65 Cel; Maximum Response Time: .000000001 s; Maximum Forward Current: .15 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HL6324MG
LASER DIODE; Peak Wavelength (nm): 635; Shape: ROUND; Maximum Threshold Current: 35 mA; Maximum Operating Temperature: 50 Cel; Configuration: SINGLE WITH BUILT-IN PHOTO DIODE;
HL6316G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 50 Cel; Nominal Output Power: 3 W; Semiconductor Material: AlGaInP; Maximum Threshold Current: 35 mA;
HL6332G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Voltage: 2.4 V; Maximum Forward Current: .075 A; No. of Functions: 1; Nominal Output Power: 10 W;
HL6326G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Semiconductor Material: AlGaInP; Nominal Output Power: 5 W; Peak Wavelength (nm): 635;
HL6322G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Nominal Output Power: 15 W; Semiconductor Material: AlGaInP; Shape: ROUND; Peak Wavelength (nm): 635;
HL6335G
LASER DIODE; Maximum Operating Temperature: 50 Cel; No. of Functions: 1; Nominal Output Power: 5 W; Maximum Threshold Current: 30 mA; Minimum Operating Temperature: -10 Cel;
HL6313G
LASER DIODE; Maximum Operating Temperature: 50 Cel; Maximum Threshold Current: 70 mA; Shape: ROUND; Size: 2 mm; Minimum Operating Temperature: -10 Cel;
HL6325G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 635; Maximum Threshold Current: 50 mA; Maximum Forward Voltage: 2.4 V; Configuration: SINGLE WITH BUILT-IN PHOTO DIODE;
HL6319G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Nominal Output Power: 10 W; Size: 2 mm; Minimum Operating Temperature: -10 Cel; Peak Wavelength (nm): 635;
HL6331G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Semiconductor Material: AlGaInP; Nominal Output Power: 10 W; Maximum Forward Voltage: 2.4 V; Maximum Threshold Current: 60 mA;
HL6327MG
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Shape: ROUND; Size: 1.6 mm; No. of Functions: 1; Maximum Operating Temperature: 50 Cel;
HL6321G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Shape: ROUND; Peak Wavelength (nm): 635; Nominal Output Power: 15 W; Minimum Operating Temperature: -10 Cel;
HL6333MG
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .075 A; Semiconductor Material: AlGaInP; Minimum Operating Temperature: -10 Cel; Maximum Threshold Current: 60 mA;
HL6315G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; JESD-609 Code: e0; Semiconductor Material: AlGaInP;
HL6323MG
LASER DIODE; Peak Wavelength (nm): 639; Size: 1.6 mm; Configuration: SINGLE WITH BUILT-IN PHOTO DIODE; Maximum Threshold Current: 65 mA; No. of Functions: 1;
HL6312G
LASER DIODE; Maximum Threshold Current: 70 mA; Minimum Operating Temperature: -10 Cel; Size: 2 mm; Maximum Operating Temperature: 50 Cel; Shape: ROUND;
HL6314MG
LASER DIODE; Maximum Threshold Current: 35 mA; Nominal Output Power: 3 W; Peak Wavelength (nm): 635; Minimum Operating Temperature: -10 Cel; No. of Functions: 1;
HL6320G
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Semiconductor Material: InGaAsP; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel; Shape: ROUND;
HL6328MG
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SINGLE WITH BUILT-IN PHOTO DIODE; No. of Functions: 1; Size: 1.6 mm; Shape: ROUND;
HL6334MG
Oclaro
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 50 Cel; Peak Wavelength (nm): 635; Semiconductor Material: AlGaInP; Maximum Forward Current: .075 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved