Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Characteristic Impedance: 50 ohm; Nominal On Time: 265 us; Minimum Operating Temperature: -55 Cel;
Median Price
$2.510
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
RFMW
1+ parts
$2.100
100+ parts
$1.420
1k+ parts
$1.090
10k+ parts
-
Newark
$2.200
$1.310
$1.190
Farnell
$1.250
$1.030
Mouser Electronics
$3.060
$1.580
$1.070
Element14
$3.100
$2.250
$1.520
Microfarads
Bristol Electronics
$1.012
$0.891
GreenTree Electronics
Northwest PG Solutions
$3.646
Continental Prestige Electronics
$1.280
$0.872
Authorized Procurement Solutions
Native Components
$3.608
RF/Microwave Switches F2910NBGP8 attributes and parameters. Explore more RF/Microwave Switches devices from Renesas Electronics
Compression Point (1 dB):
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Nominal On Time:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Equivalence Code:
Port Termination:
Power Supplies (V):
RF or Microwave Device Type:
Maximum Supply Current:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
F2910NBGP8 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Diodes Incorporated
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Jiangsu Jiejie Microelectronics
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
MASW-007072-000100
M/a-com Technology Solutions
MASW-007072-000100 by M/a-com Technology Solutions is an RF/Microwave switch with a max input power of 33.98 dBm and a max VSWR of 1.9. It operates in temperatures ranging from -40 to 85 °C and has a max insertion loss of 1.45 dB. This switch is commonly used in applications requiring SPDT functionality and a characteristic impedance of 50 ohms, within the frequency range of 0 to 3000 MHz.
ADGM1004JCPZ-R2
Analog Devices
ADGM1004JCPZ-R2 by Analog Devices is a SP4T RF switch with 50 ohm impedance, offering low insertion loss of 0.95 dB and high isolation of 16 dB. It operates from 0 to 13000 MHz, handling up to 33 dBm CW power. Ideal for RF/Microwave applications requiring precise signal routing in compact designs.
TGS8122XPCX
TGS8122XPCX by Texas Instruments is an RF/Microwave SPDT switch with 34.77 dBm CW power, 1.2 VSWR, and 1.4 dB insertion loss. Ideal for applications requiring switching b/w frequencies of 8-11 GHz in COMPONENT construction.
HMC231G7
HMC231G7 by Analog Devices is an RF/Microwave SPST switch with a max operating frequency of 6 GHz and 37 dB min isolation. It features a 2.4 dB max insertion loss, 0.006 us nominal on time, and can handle up to 30 dBm CW input power. This component is ideal for applications requiring high-frequency signal routing in communication systems.
CSY240E6327
DIVERSITY SWITCH; Construction: COMPONENT; Maximum Operating Frequency: 3000 MHz; Maximum Input Power (CW): 10 dBm; Minimum Operating Frequency: 500 MHz;
SKY13320-374LF
Skyworks Solutions
SKY13320-374LF by Skyworks Solutions is an RF/Microwave SPDT switch with max insertion loss of 0.8 dB, operating freq range of 100-6000 MHz, and impedance of 50 ohm. Ideal for applications requiring high-frequency signal routing in temperature range -40 to +85°C.
UPG2409TB-A
Renesas Electronics
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .1 us;
BGS13AL12
SP3T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: MOS; Maximum Input Power (CW): 31.99 dBm;
HMC239AS8E
Analog Devices' HMC239AS8E is a GAAS technology RF switch with 27 dBm CW input power and 1 dB max insertion loss. Ideal for diversity switching applications, it operates from -40 to 85 °C, offers 14 dB isolation, and covers frequencies up to 2500 MHz.
SPM3255
The Onsemi SPM3255 is a SPDT RF/Microwave switch with max freq of 1900 MHz. It offers low insertion loss of 0.9 dB and high isolation of 20 dB, making it ideal for wireless communication systems. With a compact surface mount package and fast switching time of 0.02 us, it operates efficiently in temperatures ranging from -20 to 70 °C.
UPG155TB-E3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -45 Cel;
SKY13351-378LF
SKY13351-378LF by Skyworks Solutions is a SPDT RF switch with 50 ohm impedance, offering 0.65 dB insertion loss and 22 dB isolation. Operating from 2-6 GHz, it handles up to 31.99 dBm CW power. Ideal for RF/microwave applications requiring fast switching in surface mount configurations.
HMC245QS16E
Analog Devices' HMC245QS16E is a SP3T RF/Microwave switch with 26.99 dBm CW input power and 1 dB max insertion loss. It operates from -40 to 85°C, has 50 ohm impedance, and supports frequencies up to 3500 MHz. Ideal for applications requiring fast switching in wireless communication systems.
UPG2022TB-E4-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 5850 MHz;
UPG2159T6R-E2-A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 1.8/2.7;
MASWSS0178
Tyco Electronics M/a-com
DIVERSITY SWITCH; Additional Features: HIGH RELIABILITY; Construction: COMPONENT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Maximum Input Power (CW): 33.01 dBm;
ADG901BRM-500RL7
ADG901BRM-500RL7 by Analog Devices is a CMOS RF/Microwave Diversity Switch with 8 terminals. It offers 1.25 dB max insertion loss, 31 dB min isolation, and operates from 0 to 2500 MHz. Ideal for applications requiring high-frequency signal routing in compact electronic devices.
HMC547ALP3E
Analog Devices' HMC547ALP3E is a RF/Microwave Switch with 30 dBm CW power, 2.5 dB insertion loss, and 50 ohm impedance. It operates from -40 to 85 °C and covers frequencies from 0-20000 MHz. Ideal for diversity switch applications due to its high power handling and wide frequency range.
UPG2193T6E-E2-A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 824 MHz;
HMC276QS24ETR
Analog Devices' HMC276QS24ETR is a GAAS SPDT RF switch with 4 functions, 26 dBm compression point, and 7 dB max insertion loss. It operates up to 3000 MHz, ideal for RF/Microwave applications requiring high isolation and fast response time. Package body material is plastic/epoxy with surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
F2913NLGK8
Integrated Device Technology
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Minimum Operating Temperature: -40 Cel; Additional Features: HIGH LINEARITY AND ISOLATION, I/P POWER-MAX(PEAK)=1W; Maximum Voltage Standing Wave Ratio: 1.22;
Renesas Electronics F2913NLGK8 is a RF/Microwave Switch with 2 functions, SPDT type, and 50 ohm impedance. It has a max insertion loss of 1.65 dB and min isolation of 46 dB. Ideal for applications requiring high-frequency switching in the range of 50-6000 MHz.
F2910NBGP
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Insertion Loss: 1 dB; Maximum Input Power (CW): 23 dBm; Minimum Operating Temperature: -55 Cel;
F2911NBGP
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Construction: COMPONENT; Minimum Operating Frequency: 1 MHz; Maximum Insertion Loss: .55 dB;
F2911NBGP8
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Supply Current: .304 mA; Minimum Isolation: 75 dB; Port Termination: REFLECTIVE;
F2912NCGI
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3.3; Maximum Voltage Standing Wave Ratio: 1.09;
F2912NCGI8
Renesas Electronics F2912NCGI8 is a SPDT RF switch with 1.4 dB max insertion loss, 23 dB min isolation, and 9000 MHz max operating frequency. Ideal for RF/microwave applications requiring high performance in a compact package.
F2913NLGK
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Terminal Finish: TIN; Construction: COMPONENT; Maximum Supply Current: .17 mA;
F2914NBGK8
SP4T; Terminal Finish: TIN; JESD-609 Code: e3;
F2915NBGK8
SP5T; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved