Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Insertion Loss: 1 dB; Maximum Input Power (CW): 23 dBm; Minimum Operating Temperature: -55 Cel;
Median Price
$1.990
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Renesas
1+ parts
100+ parts
$1.192
1k+ parts
$1.049
10k+ parts
-
DigiKey
Mouser Electronics
$1.190
$1.040
Classic Components Corporation
Prism Electronics
Component Stockers USA
$2.150
$1.550
$1.060
Native Components
$31.319
$30.066
Northwest PG Solutions
$34.451
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
RF/Microwave Switches F2910NBGP attributes and parameters. Explore more RF/Microwave Switches devices from Renesas Electronics
Compression Point (1 dB):
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Nominal On Time:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Equivalence Code:
Port Termination:
Power Supplies (V):
RF or Microwave Device Type:
Maximum Supply Current:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
F2910NBGP RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Kec
Fagor Electronica S Coop
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
KYOCERA AVX
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NSVG1002MXT1G
Onsemi
NSVG1002MXT1G by Onsemi is an RF/Microwave Switch with AEC-Q100 screening. It features a Compression Point of 30 dBm, Max Insertion Loss of 0.95 dB, and Min Isolation of 20 dB. Ideal for automotive applications due to its wide operating temperature range (-40 to 105 °C) and SP3T configuration supporting frequencies from 1-6000 MHz.
HMC435AMS8GETR
Analog Devices
Analog Devices' HMC435AMS8GETR is a RF/Microwave Switch with 1.8 dB max insertion loss, 31 dBm CW input power, and 0-4000 MHz operating frequency range. Ideal for diversity switch applications, it operates b/w -40 to 85°C with a characteristic impedance of 50 ohm.
ADRF5026SCCZ-EP
SPDT;
HMC574MS8TR
Analog Devices' HMC574MS8TR is a GAAS technology RF switch with 8 terminals, operating at frequencies up to 3 GHz. It offers low insertion loss of 0.8 dB and high isolation of 16 dB, making it ideal for applications requiring fast switching in RF/microwave systems. The switch has a compression point of 36 dBm and operates within a temperature range of -40 °C to 85°C.
935288948115
SP3T;
HMC241ALP3E
HMC241ALP3E by Analog Devices is a RF/Microwave Switch with 17.5 dBm CW power, 29 dBm compression point, and 1.5 dB max insertion loss. Ideal for diversity switch applications in the frequency range of 100 MHz to 4000 MHz with a characteristic impedance of 50 ohms.
HMC221BETR
Hittite Microwave
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Compression Point (1 dB): 29 dBm;
HMC546MS8GTR
Analog Devices' HMC546MS8GTR is a GAAS technology RF switch with 1.5 dB max insertion loss and 8 dB min isolation. Operating at up to 2200 MHz, it's ideal for diversity switching applications in temperatures ranging from -40 °C to 85°C. With a compact surface mount package, it offers fast 0.102 us nominal on time for seamless performance.
TGS8122XCCX
TGS8122XCCX by Texas Instruments is an RF/Microwave SPDT switch with a max CW input power of 34.77 dBm and VSWR of 1.2. It operates b/w 8-11 GHz, offering low insertion loss at 1.4 dB, making it ideal for high-frequency applications in communications and radar systems.
UPG2045TQ
Renesas Electronics
SP3T; Maximum Operating Frequency: 2000 MHz; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Input Power (CW): 36.02 dBm; JESD-609 Code: e0; Minimum Operating Temperature: -45 Cel;
MASW-010351-TR3000
M/a-com Technology Solutions
MASW-010351-TR3000 by M/a-com Technology Solutions is an RF/Microwave Switch with SP5T configuration, 1.2 dB max insertion loss, and 30 dBm CW input power. It operates b/w 10 MHz to 4000 MHz, making it ideal for high-frequency applications in various industries due to its wide temperature range of -40°C to 85°C.
HMC241AQS16E
HMC241AQS16E by Analog Devices is a RF/Microwave switch with a max input power of 28.51 dBm and a max insertion loss of 1.5 dB. It is commonly used as a diversity switch in applications requiring a characteristic impedance of 50 ohm and operating frequencies ranging from 0 MHz to 3500 MHz.
UPG2413T6Z-E2-A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: .75 dB;
ZXHF5000JB24TC
Diodes Incorporated
RF/Microwave Switches; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
4230-52
Psemi
Psemi's 4230-52 RF/Microwave Switch offers low insertion loss of 0.65 dB, high isolation of 26.5 dB, and a max frequency range up to 3 GHz. Ideal for SPDT applications in CMOS technology with a compact surface mount design.
HMC574AMS8ETR
Analog Devices' HMC574AMS8ETR is an RF/Microwave switch with max input power of 39 dBm, 0.8 dB insertion loss, and 50 ohm impedance. Ideal for diversity switching applications in the frequency range of 0-3000 MHz. Operating temp from -40 to 85°C makes it suitable for various environments.
CSH210P
Infineon Technologies
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 0 MHz;
NJG1681MD7-TE1
Nisshinbo Micro Devices
UPG2409T6X-E2-A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; JESD-609 Code: e6;
UPG2009TB-E3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 2500 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
F2913NLGK8
Integrated Device Technology
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Minimum Operating Temperature: -40 Cel; Additional Features: HIGH LINEARITY AND ISOLATION, I/P POWER-MAX(PEAK)=1W; Maximum Voltage Standing Wave Ratio: 1.22;
Renesas Electronics F2913NLGK8 is a RF/Microwave Switch with 2 functions, SPDT type, and 50 ohm impedance. It has a max insertion loss of 1.65 dB and min isolation of 46 dB. Ideal for applications requiring high-frequency switching in the range of 50-6000 MHz.
F2910NBGP8
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Characteristic Impedance: 50 ohm; Nominal On Time: 265 us; Minimum Operating Temperature: -55 Cel;
F2911NBGP
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Construction: COMPONENT; Minimum Operating Frequency: 1 MHz; Maximum Insertion Loss: .55 dB;
F2911NBGP8
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Supply Current: .304 mA; Minimum Isolation: 75 dB; Port Termination: REFLECTIVE;
F2912NCGI
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3.3; Maximum Voltage Standing Wave Ratio: 1.09;
F2912NCGI8
Renesas Electronics F2912NCGI8 is a SPDT RF switch with 1.4 dB max insertion loss, 23 dB min isolation, and 9000 MHz max operating frequency. Ideal for RF/microwave applications requiring high performance in a compact package.
F2913NLGK
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Terminal Finish: TIN; Construction: COMPONENT; Maximum Supply Current: .17 mA;
F2914NBGK8
SP4T; Terminal Finish: TIN; JESD-609 Code: e3;
F2915NBGK8
SP5T; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved