Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPDT; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
Median Price
$3.190
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
$2.610
100+ parts
$1.570
1k+ parts
-
10k+ parts
Renesas
$1.973
$1.755
$1.663
DigiKey
Newark
$1.970
Mouser Electronics
$1.980
$1.900
$1.890
Element14
$3.541
$2.601
$1.804
RS (Exports)
$2.862
$2.803
Chip Stock
Halfin
Continental Prestige Electronics
$3.000
$1.960
$1.580
QUARKTWIN TECHNOLOGY LTD
Northwest PG Solutions
Native Components
RF/Microwave Switches F2970NCGK attributes and parameters. Explore more RF/Microwave Switches devices from Renesas Electronics
JESD-609 Code:
RF or Microwave Device Type:
Terminal Finish:
F2970NCGK RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - All Dev Label Chg 1/Dec/2022
PCN Assembly/Origin - Assembly Site 17/Oct/2022
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
BGS12WN6
Infineon Technologies
RF/Microwave Switches;
UPG2030TB-E3
Renesas Electronics
SPDT; Minimum Operating Frequency: 500 MHz; Maximum Input Power (CW): 33.01 dBm; Maximum Operating Frequency: 2500 MHz; Minimum Operating Temperature: -45 Cel; Maximum Insertion Loss: .55 dB;
TGS8632-XCC
TGS8632-XCC by Texas Instruments is an RF/Microwave SPST switch with 30 dBm CW power, 1.5 VSWR, and 0-18000 MHz frequency range. Ideal for applications requiring high-frequency signal routing in communication systems or test equipment.
HMC595AE
Analog Devices
Analog Devices' HMC595AE is a RF/Microwave switch with max input power of 39 dBm, 0.8 dB insertion loss, and 50 ohm impedance. Ideal for diversity switching applications in the frequency range of 0-3000 MHz, operating b/w -40 to 85°C.
UPG168TB-E4
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
F2913NLGK
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Terminal Finish: TIN; Construction: COMPONENT; Maximum Supply Current: .17 mA;
HMC270MS8GETR
Hittite Microwave
SPDT; Terminal Finish: Matte Tin (Sn); Construction: COMPONENT; Maximum Insertion Loss: 2.4 dB; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 23.98 dBm;
BGS13AL12
SP3T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: MOS; Maximum Input Power (CW): 31.99 dBm;
HMC446E
Analog Devices' HMC446E is an RF/Microwave switch with max input power of 41.14 dBm, insertion loss of 1 dB, and operating freq range of 824-849 MHz. Ideal for diversity switching applications due to its 50 ohm impedance and temp range of -40 to +85°C.
HMC241LP3TR
SP4T; JESD-609 Code: e0; Terminal Finish: TIN LEAD;
MA4SW510
M/a-com
SP5T; Maximum Insertion Loss: 1.4 dB; Minimum Operating Temperature: -65 Cel; Power Supplies (V): 25; Package Equivalence Code: DIE OR CHIP; Maximum Operating Frequency: 26000 MHz;
HMC276LP4TR
Analog Devices' HMC276LP4TR is a GAAS SPDT RF switch with 2 functions, 24 terminals, and max operating freq of 3000 MHz. It offers -40 to 85 °C temp range, 7 dB insertion loss, and 31 dB isolation. Ideal for RF/microwave applications requiring high compression point at 26 dBm.
HMC1118LP3DETR
Analog Devices' HMC1118LP3DETR is a RF/Microwave SPDT switch with 50 ohm impedance, offering 18 dB isolation and 2 dB insertion loss. It operates from 0.009 MHz to 13000 MHz, handles up to +28 dBm CW power, and has a compression point of +37 dBm. Ideal for applications requiring high-frequency signal routing in communication systems.
MA4AGSW1A
SPST; Technology: GAAS; Maximum Operating Frequency: 50000 MHz; Power Supplies (V): -5; Package Equivalence Code: DIE OR CHIP; Maximum Operating Temperature: 125 Cel;
ADG918BCP-REEL7
ADG918BCP-REEL7 by Analog Devices is a CMOS RF/Microwave switch with 8 terminals. It operates from -40 to 85 °C, with max freq of 4 GHz and insertion loss of 1.25 dB. Ideal for diversity switching applications due to its high isolation of 36 dB.
SKYA21002
Skyworks Solutions
SP3T;
HMC253LC4TR
Analog Devices' HMC253LC4TR is a SP8T RF switch with 1.7 dB max insertion loss, 30 dB min isolation, and 24 dBm compression point. Ideal for applications requiring high-frequency switching in RF/microwave systems up to 3.5 GHz. Package body material is ceramic, with gold (Au) - nickel (Ni) terminal finish for durability and reliability in harsh environments.
6014
Mercury Systems
SPST; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.5; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 10100 MHz; Additional Features: SMA;
HMC221BTR
Analog Devices' HMC221BTR is a RF/Microwave Switch with max input power of 20 dBm and compression point at 8 dBm. It operates from -40 to 85 °C, offers low insertion loss of 1.1 dB, and provides isolation of 14 dB. Ideal for diversity switch applications in the frequency range of 0.01-3000 MHz.
HMC344LP3
Analog Devices' HMC344LP3 is a GAAS SP4T RF switch with 2.5 dB max insertion loss, 31 dB min isolation, and 8000 MHz max operating frequency. Ideal for RF/microwave applications, it has -40 to 85 °C temp range and Tin/Lead terminals in a plastic package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
F2972NEGK8
Integrated Device Technology
DIVERSITY SWITCH; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
SPDT; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
F2970NCGK8
F2971NCGK
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Minimum Isolation: 56 dB; Maximum Operating Frequency: 3000 MHz; Terminal Finish: Tin (Sn);
F2971NCGK8
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; No. of Functions: 1; Minimum Operating Frequency: 5 MHz; Maximum Input Power (CW): 26 dBm;
F2972NEGK
F2976NEGK
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; No. of Functions: 3; Minimum Operating Frequency: 5 MHz; Maximum Operating Frequency: 10000 MHz;
F2976NEGK8
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Port Termination: REFLECTIVE; Nominal On Time: 1.5 us; JESD-609 Code: e3;
F2977NEGK
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Minimum Isolation: 29 dB; Nominal On Time: 1.5 us; Maximum Operating Temperature: 105 Cel;
F2977NEGK8
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Construction: COMPONENT; Maximum Supply Current: .15 mA; Minimum Operating Frequency: 30 MHz;
RF/Microwave Switches; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
F2970NCGK
RF/Microwave Switches; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
DIVERSITY SWITCH; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved