Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADG918BRMZ-REEL7 by Analog Devices is a CMOS RF/Microwave switch with 8 terminals. It offers 1.25 dB max insertion loss, 34 dB min isolation, and operates from 0 to 4000 MHz. Ideal for diversity switching applications due to its high compression point of 17 dBm and low on time of 0.0066 us.
Median Price
$4.610
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$3.910
100+ parts
$2.880
1k+ parts
-
10k+ parts
Analog Devices Inc
$4.470
$3.365
$2.511
$2.367
Mouser Electronics
$4.750
$3.010
$2.690
$2.660
DigiKey
$3.009
$2.696
$2.605
Newark
$4.790
$3.050
$2.720
Farnell
$5.550
$3.260
$2.340
Element14
$6.640
$4.220
$3.880
Arrow
$2.504
$2.401
Verical
$0.019
Rochester
$2.370
$2.120
$1.990
Digiode
$2.413
Nova Conductors
$2.590
Maritex
$9.355
$4.956
$4.424
Chip Stock
VNN
Vyrian
Sea View Technologies
Bristol Electronics
J2 Sourcing AB
Parana Technologies
$1.845
$1.716
IDEA Electronic Components Group
$1.984
$1.885
Semicontronic
$2.160
$2.106
$2.095
Ampacity Inc.
Corphita
$2.286
Corohmni
$2.702
Aztec Data Supply Inc.
$2.859
DigiPath Technology Company
$3.095
$2.971
RC Electronics
Lixinc
Authorized Procurement Solutions
Argo Parts USA
Netroflash
$2.538
$2.460
$2.409
iodParts Technologies Inc.
Continental Prestige Electronics
$1.950
The use of plastic/epoxy material makes the switch lightweight and durable, ideal for applications where weight and durability are important factors.
The high maximum input power handling capability allows for use in high power RF/microwave applications without the risk of damage to the switch.
The high compression point ensures that the switch maintains its performance even at high power levels, preventing signal distortion.
Having 8 terminals allows for versatile connections and configurations, making the switch suitable for a variety of setups and applications.
The low insertion loss of 1.25 dB minimizes signal loss when the switch is in the 'on' state, ensuring efficient signal transmission.
The high isolation of 34 dB between the ports ensures that there is minimal signal leakage between the terminals, preventing interference and crosstalk.
RF/Microwave Switches ADG918BRMZ-REEL7 attributes and parameters. Explore more RF/Microwave Switches devices from Analog Devices
Compression Point (1 dB):
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Nominal On Time:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Port Termination:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
ADG918BRMZ-REEL7 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site Addition 05/Jan/2015
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Lite-on Semiconductor
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
Grande Electronics
Continental Device India
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
HMC349MS8GETR
Hittite Microwave
Hittite Microwave's HMC349MS8GETR is a SPDT RF/Microwave switch with 2 functions, operating up to 4000 MHz. It offers low insertion loss of 2.1 dB and high isolation of 42 dB, making it ideal for applications requiring fast response times and reliable signal routing in temperature range from -40 to 85°C.
UPG2010TB-A
Renesas Electronics
SPDT; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 2500 MHz; Construction: COMPONENT; Minimum Operating Frequency: 500 MHz; Maximum Input Power (CW): 36.02 dBm;
HSWA2-63DR+
Mini-circuits
The Mini-circuits HSWA2-63DR+ is a SPDT RF switch with 1.9 dB max insertion loss, 44 dB min isolation, and 30 dBm CW input power. It operates from 100 MHz to 6 GHz, ideal for RF/Microwave applications requiring high performance in a compact package.
ADG902BCPZ-REEL7
Analog Devices
ADG902BCPZ-REEL7 by Analog Devices is a CMOS RF/Microwave switch with 8 terminals, operating from -40 to 85 °C. It offers low insertion loss of 1.25 dB, high isolation of 31 dB, and can handle up to 17.99 dBm input power. Ideal for diversity switching applications in the frequency range of 0-2500 MHz.
CMD204C3
Qorvo
CMD204C3 by Qorvo is an RF/Microwave Switch with max input power of 27 dBm, VSWR of 1.22, and max insertion loss of 2 dB. It's a SPST device with characteristic impedance of 50 ohm, ideal for applications requiring high isolation up to 35 dB in the frequency range from 0-20000 MHz.
UPG138GV-E1
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 18 dB;
HMC347B-GP
Analog Devices' HMC347B-GP RF/Microwave Switch offers 17 dBm CW input power, 1.38 VSWR, and 24 dBm compression point. Ideal for applications requiring SPDT technology with a frequency range of 100-20000 MHz, providing low insertion loss of 2.2 dB and high isolation of 40 dB in a compact surface mount design.
HMC7992LP3DETR
HMC7992LP3DETR by Analog Devices is a SP4T RF/Microwave Switch with 1.5 dB max insertion loss, 25 dB min isolation, and 33 dBm compression point. Ideal for applications requiring high-frequency switching in the range of 100 MHz to 6 GHz, such as wireless communication systems and radar equipment.
ADRF5042
SP4T;
HMC1084LC4TR
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Power Supplies (V): -3;
UPG2409TB-E4-A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
SKY13317-373LF
Skyworks Solutions
SKY13317-373LF by Skyworks Solutions is a SP3T RF/Microwave Switch with 30 dBm CW power, 18.5 dBm compression point, and 1.2 dB max insertion loss. Ideal for applications requiring fast 0.055 us on time, it operates from 100 MHz to 6000 MHz with 22 dB min isolation at temperatures ranging from -40°C to 85°C.
HMC546LP2TR
Analog Devices' HMC546LP2TR is a GAAS SPDT RF switch with 1.5 dB max insertion loss, 10 dB min isolation, and 2700 MHz max operating frequency. Ideal for RF/microwave applications, it has a plastic/epoxy package, operates b/w -40 to 85 °C, and features tin/lead terminal finish.
F2972NEGK
SPDT; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
HMC322LP4
HMC322LP4 by Analog Devices is a SP8T RF/Microwave switch with 2.9 dB max insertion loss, 20 dB min isolation, and 8000 MHz max operating frequency. It is ideal for applications requiring high-frequency switching in components with -40 to 85 °C operating temperature range.
ADRF5045
Analog Devices' ADRF5045 is a 50 ohm RF/Microwave Diversity Switch with max input power of 22.04 dBm, operating freq range from 0.009 MHz to 30 GHz. Ideal for applications requiring high temp tolerance (-40 to 85 °C), such as wireless communication systems.
HMC-C071
Analog Devices' HMC-C071 is a COAXIAL SP4T RF switch with 50 ohm impedance. It offers a max insertion loss of 3.9 dB and can handle up to 23.98 dBm CW input power. Ideal for applications requiring high-frequency switching in environments ranging from -55°C to 85°C.
UPD5904T7K-E2-A
DIVERSITY SWITCH;
UPG2179TB-E4
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Insertion Loss: .55 dB;
HMC284AMS8G
HMC284AMS8G by Analog Devices is an RF/Microwave Switch with a max input power of 25.91 dBm and compression point of 29 dBm. It features SPDT construction, 1.1 dB insertion loss, and 30 dB isolation making it ideal for applications requiring high-frequency signal routing in communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADG918BCPZ-REEL7
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Insertion Loss: 1.25 dB;
ADG919BCPZ-REEL7
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
ADG901BRMZ-REEL7
ADG901BRMZ-REEL7 by Analog Devices is a CMOS RF switch with 8 terminals, operating from 0 to 2500 MHz. It offers low insertion loss of 1.25 dB and high isolation of 31 dB, suitable for diversity switching applications in RF/Microwave systems. The switch has a compact surface-mount package with matte tin finish and can handle up to 17.99 dBm input power.
ADG901BRMZ
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Characteristic Impedance: 50 ohm;
ADG901BCPZ-500RL7
ADG901BCPZ-500RL7 by Analog Devices is an RF/Microwave switch with a max input power of 18.06 dBm and a max insertion loss of 1.25 dB. It is commonly used as a diversity switch in applications requiring a characteristic impedance of 50 ohms and operating frequencies ranging from 0 MHz to 2500 MHz.
ADG918BRMZ
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Compression Point (1 dB): 17 dBm;
ADG918BCPZ-500RL7
ADG918BCPZ-500RL7 by Analog Devices is a RF/Microwave Switch with 1.25 dB max insertion loss, 36 dB min isolation, and 4000 MHz max operating frequency. It is used as a diversity switch in applications requiring high-frequency signal routing.
ADG919BRMZ
The Analog Devices ADG919BRMZ is a CMOS RF/Microwave Diversity Switch with 8 terminals. It offers a max insertion loss of 1.25 dB and min isolation of 34 dB, making it ideal for applications requiring high-frequency switching in the range of 0-4000 MHz. With a compact surface-mount package and operating temperatures from -40 to 85°C, this switch is suitable for various wireless communication systems.
ADG902BRM
ADG902BRM-500RL7
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Minimum Operating Temperature: -40 Cel;
ADG902BRM-REEL7
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Power Supplies (V): 1.8/2.5;
ADG901BRM-REEL7
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Terminal Finish: Tin/Lead (Sn85Pb15);
ADG902BRMZ
ADG901BCP-500RL7
ADG901BCPZ-REEL7
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; JESD-609 Code: e3;
ADG901SCPZ-EP
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Construction: COMPONENT;
ADG901SCPZ-EP-RL7
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 125 Cel;
ADG901BRM
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Construction: COMPONENT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved