Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Terminal Finish: TIN; Construction: COMPONENT; Maximum Supply Current: .17 mA;
Median Price
$4.590
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
RFMW
1+ parts
$4.450
100+ parts
-
1k+ parts
10k+ parts
Renesas
$2.947
$2.604
$2.528
Mouser Electronics
$3.510
$3.250
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Native Components
$60.180
$57.773
Northwest PG Solutions
$66.198
Perfect Parts
RF/Microwave Switches F2913NLGK attributes and parameters. Explore more RF/Microwave Switches devices from Renesas Electronics
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Minimum Isolation:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Nominal On Time:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Equivalence Code:
Port Termination:
Power Supplies (V):
RF or Microwave Device Type:
Maximum Supply Current:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
F2913NLGK RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Comchip Technology
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
UPG2163T5N-E2-A
Renesas Electronics
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC349ALP4CE
Hittite Microwave
DIVERSITY SWITCH; Maximum Insertion Loss: 1.7 dB; Maximum Operating Frequency: 4000 MHz; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm;
UPG2054K-A
RF/Microwave Switches;
F2913NLGK8
Renesas Electronics F2913NLGK8 is a RF/Microwave Switch with 2 functions, SPDT type, and 50 ohm impedance. It has a max insertion loss of 1.65 dB and min isolation of 46 dB. Ideal for applications requiring high-frequency switching in the range of 50-6000 MHz.
HMC546LP2ERTR
Analog Devices
Analog Devices' HMC546LP2ERTR is a GAAS SPDT RF switch with 1.5 dB max insertion loss and 10 dB min isolation. Operating at up to 2700 MHz, it has a 0.102 us on time and operates b/w -40°C to 85°C. Ideal for RF/microwave applications requiring fast switching and high frequency performance.
SW-277TR
M/a-com
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 14 dB;
HMC641LP4E
Analog Devices' HMC641LP4E is a SP4T RF/Microwave switch with 50 ohm impedance, offering 30 dB isolation and 4.2 dB insertion loss up to 20 GHz. It operates from -40°C to 85°C, handles CW input power of 23.98 dBm, and has a compression point at 15 dBm. Ideal for applications requiring high-frequency signal routing in component construction setups.
SS-23
Sirenza Microdevices
SPST;
SKY13317-373LF
Skyworks Solutions
SKY13317-373LF by Skyworks Solutions is a SP3T RF/Microwave Switch with 30 dBm CW power, 18.5 dBm compression point, and 1.2 dB max insertion loss. Ideal for applications requiring fast 0.055 us on time, it operates from 100 MHz to 6000 MHz with 22 dB min isolation at temperatures ranging from -40°C to 85°C.
UPG2214TB-E4
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 30 dBm;
ADRF5026BCCZN-R7
Analog Devices' ADRF5026BCCZN-R7 is a CMOS SPDT RF switch with 50 ohm impedance, 1.15 VSWR, and 27 dBm compression point. It operates from 100 MHz to 44 GHz, handling up to 25 dBm CW power. Ideal for RF/microwave applications requiring high-frequency switching in compact designs.
HMC105
Analog Devices' HMC105 RF/Microwave Switch offers -5/-8V power supplies, 125°C max temp, and 6000MHz operating frequency. With GAAS technology, it features SPST type with 25dB isolation for applications requiring fast 0.006us on time in absorptive port termination setups.
UPG2012TK-E2-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
UPG107P
SPDT; Technology: GAAS; Package Equivalence Code: DIE OR CHIP; Power Supplies (V): -5; No. of Functions: 1;
SW-254
M/a-com Technology Solutions
SW-254 by M/a-com Technology Solutions is an RF/Microwave Switch with SP4T configuration, 50 ohm impedance, and 1.9 dB insertion loss. It operates b/w 5 MHz to 2000 MHz, with a VSWR of 2.3 and temperature range from -55°C to 85°C. Ideal for high-frequency applications requiring precise signal routing.
HMC349MS8GE
HMC349MS8GE by Hittite Microwave is a SPDT RF/Microwave switch with 2 functions, 50 ohm impedance, and 42 dB isolation. It operates from 0 to 4000 MHz, handles up to 30 dBm CW power, and has a max insertion loss of 2.1 dB. Ideal for applications requiring fast switching in high-frequency environments.
HMC446ETR
Analog Devices' HMC446ETR is a SPDT RF/Microwave switch with 1 dB max insertion loss, 18 dB min isolation, and 41 dBm CW input power. It operates from -40 to 85 °C, suitable for applications requiring high-speed switching in the frequency range of 824-894 MHz.
UPG2406TK-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: FL6,.047,20;
SPM3215
Onsemi
Onsemi's SPM3215 RF/Microwave Switch offers 1.6 VSWR, 26 dBm compression point, and 1.4 dB max insertion loss. Ideal for SPDT applications up to 2500 MHz with -20 to 85 °C operating range, this surface-mount switch has 6 terminals and requires a 3V power supply.
HMC232LP4
HMC232LP4 by Analog Devices is a RF/Microwave Switch with 24 terminals, offering max insertion loss of 3.1 dB and min isolation of 37 dB. With a max operating frequency of 12 GHz, it is ideal for high-frequency applications requiring fast switching times (0.006 us) and high power handling (30 dBm CW).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Integrated Device Technology
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Minimum Operating Temperature: -40 Cel; Additional Features: HIGH LINEARITY AND ISOLATION, I/P POWER-MAX(PEAK)=1W; Maximum Voltage Standing Wave Ratio: 1.22;
F2910NBGP
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Insertion Loss: 1 dB; Maximum Input Power (CW): 23 dBm; Minimum Operating Temperature: -55 Cel;
F2910NBGP8
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Characteristic Impedance: 50 ohm; Nominal On Time: 265 us; Minimum Operating Temperature: -55 Cel;
F2911NBGP
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Construction: COMPONENT; Minimum Operating Frequency: 1 MHz; Maximum Insertion Loss: .55 dB;
F2911NBGP8
SPST; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Maximum Supply Current: .304 mA; Minimum Isolation: 75 dB; Port Termination: REFLECTIVE;
F2912NCGI
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3.3; Maximum Voltage Standing Wave Ratio: 1.09;
F2912NCGI8
Renesas Electronics F2912NCGI8 is a SPDT RF switch with 1.4 dB max insertion loss, 23 dB min isolation, and 9000 MHz max operating frequency. Ideal for RF/microwave applications requiring high performance in a compact package.
F2914NBGK8
SP4T; Terminal Finish: TIN; JESD-609 Code: e3;
F2915NBGK8
SP5T; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved