Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIFOs; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
Native Components
FIFO 7208L15JGI attributes and parameters. Explore more FIFO devices from Renesas Electronics
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
7208L15JGI Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.71
SB
8542.32.00.70
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
72V271LA10PFG8
Renesas Electronics
The Renesas Electronics 72V271LA10PFG8 is a FIFO memory IC with a cycle time of 10 ns and a max clock frequency of 100 MHz. It is commonly used in applications that require synchronous operation and have a need for high-speed data buffering or temporary storage.
SN74ABT7819A-30PH
Texas Instruments
SN74ABT7819A-30PH by Texas Instruments is a 512KX18 BI-DIRECTIONAL FIFO with 30 ns cycle time, operating at 33.3 MHz clock frequency. It features synchronous operation and GULL WING terminals, suitable for applications requiring fast data transfer and memory management in commercial-grade environments.
IDT7203L25PI
Integrated Device Technology
IDT7203L25PI by Integrated Device Technology is a FIFO memory chip with 2Kx9 organization, operating at 28.5 MHz clock frequency and 35 ns cycle time. It is designed for industrial applications requiring fast and reliable data storage and retrieval in parallel mode.
5962-9560901QYA
The Texas Instruments 5962-9560901QYA is a MILITARY-grade BI-DIRECTIONAL FIFO memory IC with 64x36 organization, 20 ns cycle time, and 50 MHz clock frequency. It operates synchronously at -55 to 125 °C and is ideal for high-speed data buffering in military applications.
SN74ACT72235-30FNR
SN74ACT72235-30FNR by Texas Instruments is a FIFO chip with 1KX9 organization, 30.3 ns cycle time, and 5V nominal voltage. It is used in applications requiring synchronous operation, such as data buffering and communication systems. The chip comes in a square plastic/epoxy package with 44 terminals for surface mount installation.
SN74ABT3613PCBR
SN74ABT3613PCBR by Texas Instruments is a FIFO with 64x36 organization, operating at 5V. It features a cycle time of 30ns and synchronous operation, suitable for applications requiring fast data transfer and memory management in commercial-grade environments. The device comes in a square plastic/epoxy package with surface mount capability, making it ideal for compact electronic designs.
7204L15J8
7204L15J8 by Integrated Device Technology is a FIFO chip carrier with 4Kx9 organization, operating at 40MHz clock frequency. It has a cycle time of 25ns and can be used in commercial applications requiring fast asynchronous memory access.
IDT7208L25JGI8
FIFOs; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Maximum Seated Height: 3.55 mm;
IDT72V2105L10PFG
IDT72V2105L10PFG by Renesas Electronics is a 256Kx18 FIFO with 10ns cycle time, operating in synchronous mode at 3.3V. It features a low profile flatpack package and Gull Wing terminals, suitable for commercial applications requiring fast data transfer and memory management.
7202LA25JGI
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Parallel or Serial: PARALLEL;
IDT72V241L10PFG
IDT72V241L10PFG by Renesas Electronics is a FIFO with 4Kx9 organization, operating at 3.3V. It features a cycle time of 10ns and synchronous operation, suitable for parallel applications requiring fast access times. This low-profile flatpack device has a memory density of 36864 bits and offers output enable functionality for efficient data processing.
72V841L15PFI8
72V841L15PFI8 by Integrated Device Technology is a FIFO with 4Kx9 organization, operating at 66.7 MHz clock frequency and 15 ns cycle time. It is suitable for industrial applications requiring a memory density of 36864 bits, with synchronous operation and parallel interface.
IDT7203L15TPI
IDT7203L15TPI by Integrated Device Technology is a FIFO memory with 2Kx9 organization, operating at 40 MHz clock frequency. It features a cycle time of 25 ns and is suitable for industrial applications requiring fast data storage and retrieval. With a package style of IN-LINE and through-hole terminal form, it offers reliable performance in harsh environments.
72V255LA10TFG8
The Renesas Electronics 72V255LA10TFG8 FIFO features a cycle time of 10 ns, operating at a max clock frequency of 100 MHz. With an organization of 8KX18 and memory density of 147456 bit, it is ideal for applications requiring fast data processing such as networking equipment and telecommunications devices.
SN74ABT7820-15PN
SN74ABT7820-15PN by Texas Instruments is a FIFO memory IC with 512x18 organization, 15 ns cycle time, and 67 MHz clock frequency. It operates synchronously at 5V and features a low profile flatpack package. Ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
CD74HC40105M96
Rca Solid State
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Technology: CMOS;
IDT72V7280L10BB
IDT72V7280L10BB by Integrated Device Technology is a 16Kx72 FIFO with a cycle time of 10ns and operating at 100MHz. Suitable for commercial applications, it features synchronous operation, 256 terminals in a grid array package, and a memory density of 1179648 bits.
SN74ACT7203-30N
SN74ACT7203-30N by Texas Instruments is a FIFO with 2Kx9 organization, operating at 5V. It has a max clock frequency of 25MHz and memory density of 18432 bits. Ideal for applications requiring asynchronous operation and fast access times up to 30ns.
72V241L10PFG8
The Renesas Electronics 72V241L10PFG8 FIFO operates in synchronous mode with a cycle time of 10 ns and a clock frequency of 100 MHz. It has a memory density of 36864 bit, suitable for applications requiring fast data access such as networking equipment and telecommunications devices.
CD54HC40105F3A
CD54HC40105F3A by Texas Instruments is a 16x4 FIFO with 500ns cycle time, operating at 4.5V. It has 3-STATE output characteristics and supports up to 10MHz clock frequency. Ideal for military applications due to its MILITARY temperature grade and through-hole terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7208L20JG
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Memory Density: 589824 bit;
FIFOs; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Qualification: Not Qualified;
7208L20PDGG8
BI-DIRECTIONAL FIFO;
7208L15JG8
BI-DIRECTIONAL FIFO; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Organization: 64KX9; Maximum Supply Current: 120 mA;
7208L20PDGGB
7208L20PDG
BI-DIRECTIONAL FIFO; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Standby Current: .012 Amp; Maximum Clock Frequency (fCLK): 33.3 MHz;
7208L15PDGI
FIFOs;
7208L12JG8
FIFOs; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 3;
7208L20JG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Surface Mount: YES;
7208L20JGB
7208L20JGI8
7208L15PDG
BI-DIRECTIONAL FIFO; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; No. of Words Code: 64K; Output Characteristics: 3-STATE;
7208L20PDGG
7208L15JG
BI-DIRECTIONAL FIFO; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Maximum Standby Current: .012 Amp; Terminal Pitch: 1.27 mm;
7208L20JGB8
7208L12JG
FIFOs; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
7208L12PDG
7208L15JGI8
FIFOs; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
7208L20JGI
7208L15JGI
FIFOs; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved