Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LNK306G by Power Integrations is a switching regulator with 1.4A output current and 70kHz max frequency, ideal for automotive applications. It features a small outline package, pulse width modulation control technique, and operates b/w -40°C to 125°C. Perfect for compact designs requiring efficient power management in harsh environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
ComSIT Distribution GmbH
Prism Electronics
AZTECH Wire
$19.309
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Perfect Parts
Provides good insulation and protection for the internal components of the product.
Enables easy and convenient installation on circuit boards.
Allows the product to operate in high temperature environments without overheating.
Capable of delivering a high output current for powering various electronic devices.
Efficient control technique that helps regulate the output voltage with high accuracy.
Switching Regulators & Controllers LNK306G attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Additional Features:
Other IC type:
Control Technique:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LNK306G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Design Chgs 29/Jul/2016
PCN Assembly/Origin - Improved Passivation 23/Jun/2015
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Goodwork Semiconductor
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
TPS560430XFDBVT
TPS560430XFDBVT by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 24V and current of 0.6A, suitable for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique at a high switching frequency of 2100kHz.
LM25011AQ1MYX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
LM5575MH/NOPB
LM5575MH/NOPB by Texas Instruments is a 16-terminal switching regulator with a max output current of 2.5A and max output voltage of 70V. Ideal for automotive applications, it operates b/w -40 to 125°C, with a control mode of current-mode PWM.
TPS54060ADGQR
TPS54060ADGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 60V. It operates in current-mode control technique, suitable for automotive applications due to its temperature grade and small outline package style. With a buck switcher configuration, it offers pulse width modulation control mode at a high max switching frequency of 2500 kHz.
TPS552882QWRPMRQ1
TPS552882QWRPMRQ1 by Texas Instruments is a 26-terminal switching regulator with a 12V nominal input/output voltage, operating b/w -40 to 150°C. It utilizes current-mode control and pulse width modulation technique for buck-boost configuration, supporting up to 6.35A output current at a max frequency of 2200 kHz. Ideal for automotive applications due to AEC-Q100 screening level and compact chip carrier package style.
LM25011AQ1MY/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .5 mm;
LM27761DSGT
LM27761DSGT by Texas Instruments is a small outline, heat sink package with 8 terminals. It operates at -40 to 85°C and supports input voltage from 2.7V to 5.5V, outputting up to -1.5V at 0.25A max current. Ideal for industrial applications requiring a switched capacitor inverter with pulse frequency modulation control technique.
LT8608EMSE#PBF
Analog Devices
LT8608EMSE#PBF by Analog Devices is a switching regulator with a max input voltage of 42V and a max switching frequency of 2200kHz. It operates in current-mode control and is suitable for applications requiring small outline, heat sink, and thin profile packages.
TPS54326RGTR
TPS54326RGTR by Texas Instruments is a voltage-mode switching regulator with a max output current of 3A and a max switching frequency of 700kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power conversion in compact spaces. With a package style of chip carrier and very thin profile, this regulator is ideal for space-constrained designs where high efficiency and precise voltage regulation are essential.
TPS54360DDAR
TPS54360DDAR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique. The package style is small outline, making it ideal for space-constrained designs.
TPS54308DDCT
TPS54308DDCT by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 350kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
LM2594HVM-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
PI3740-00-LGIZ
Vicor
Vicor's PI3740-00-LGIZ is a switching regulator with 108 terminals, operating from -40 to 115°C. It offers a wide input range of 8-60 V and output voltage of 10-50 V, suitable for industrial applications requiring high efficiency and precise current/voltage control up to 1000 kHz frequency.
SG3525AN
Motorola
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by National Semiconductor is a switching regulator with a max output current of 1.25 A and a max input voltage of 40 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
TPS5430DDARG4
TPS5430DDARG4 by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and VOLTAGE-MODE control mode. Package style: SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE.
LM22675MR-ADJ/NOPB
LM22675MR-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
LMZM23601V5SILT
LMZM23601V5SILT by Texas Instruments is a switching regulator with a max output current of 1A and max output voltage of 15V. Ideal for automotive applications, it operates b/w -40 to 125°C, offering a control mode of current-mode PWM. With a compact package style and high switching frequency of 1100kHz, it suits space-constrained designs requiring efficient power management.
LM2672M-12/NOPB
LMZ23605TZE/NOPB
LMZ23605TZE/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max switching frequency, and 3.3V nominal output voltage. Ideal for industrial applications requiring efficient power management in a compact package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LNK304PN
Power Integrations
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LNK306PN
LNK306PN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. The package style is in-line with 8 terminals and a rectangular shape, ideal for through-hole mounting.
LNK304DN-TL
LNK304GN-TL
LNK304GN-TL by Power Integrations is a switching regulator with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 0.4A and PWM control technique, it is ideal for buck converter designs up to 70 kHz frequency.
LNK306GN-TL
LNK306GN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 1.4A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
LNK304DN
LNK304DN by Power Integrations is a switching regulator IC with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of up to 70 kHz in automotive applications. The package is small outline, rectangular in shape, and surface mountable for compact designs.
LNK306DN-TL
LNK306DN-TL by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, operates b/w -40 to 125°C, and comes in a small outline rectangular package suitable for surface mount assembly.
LNK302DG-TL
LNK302DG-TL by Power Integrations is a switching regulator with a max output current of 0.2A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. The device operates in temperatures ranging from -40°C to 125°C, making it suitable for various automotive power management systems.
LNK306GN
LNK306GN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. With surface mount capability and dual terminal position, it offers efficient power management in compact designs.
LNK304DG-TL
LNK305PN
LNK305PN by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 0.8 A and operates at a frequency of 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK306DN
LNK306DN by Power Integrations is a switching regulator with 1.4A output current and 70kHz max frequency, suitable for automotive applications. It features a small outline package with dual terminals and operates b/w -40°C to 125°C. The device uses pulse width modulation control technique in a buck switcher configuration.
LNK304GN
LNK306DG-TL
LNK302GN
LNK305GN
LNK305GN by Power Integrations is a switching regulator with a max output current of 0.8A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a temperature grade of AUTOMOTIVE and pulse width modulation control technique. The package style is small outline with GULL WING terminal form, making it suitable for surface mount assembly.
LNK305DN-TL
LNK305DN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.8A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK305DN
LNK304DG
LNK304DG by Power Integrations is a switching regulator IC with a max output current of 0.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring pulse width modulation control technique in a small outline package suitable for surface mount assembly.
LNK304GTL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved