Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LNK305DN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.8A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
Median Price
$0.864
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.980
100+ parts
$0.811
1k+ parts
$0.740
10k+ parts
$0.646
Farnell
$7.760
$5.630
$4.790
$4.510
DigiKey
-
$0.690
EBV Elektronik
Element14
$0.767
Newark
$0.795
$0.735
$0.706
Nova Conductors
$0.780
ComSIT Distribution GmbH
Vyrian
NAC Semi
$1.010
IBS Electronics
$0.881
Continental Prestige Electronics
$0.707
$0.579
$0.498
Aranea Global
$0.764
$0.733
Argo Parts USA
Aztec Data Supply Inc.
$1.490
Advanced Electronics
$14.198
$12.920
$11.642
Corohmni
$22.538
Perfect Parts
Eastek
$1.020
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Lixinc
Kepictronics
This material ensures lightweight and durable construction, making it ideal for portable electronic devices.
This feature allows for easy integration onto circuit boards, saving space and simplifying the manufacturing process.
The rectangular shape offers a standardized form factor for easy compatibility with various applications.
With a sufficient number of terminals, this product can support complex circuit configurations and provide versatile connectivity options.
The compact small outline package style is perfect for applications where space is limited.
With a high maximum operating temperature, this product can withstand harsh environmental conditions.
The wide range of operating temperatures ensures reliable performance in both extreme cold and hot environments.
The pure matte tin finish enhances conductivity and corrosion resistance for improved reliability.
Dual terminal position allows for flexible mounting orientation and ease of soldering during assembly.
The low seated height makes this product suitable for slim devices where space is a constraint.
The compact width ensures compatibility with narrow circuit layouts and tight spaces.
This switching regulator IC type offers efficient power conversion and regulation for optimal performance.
The short length of this product is ideal for applications where size constraints are a concern.
Designed for automotive applications, this product meets the stringent temperature and reliability requirements of the automotive industry.
The high switching frequency allows for fast response and precise control of the power output.
With a maximum output current of 0.8 A, this product can efficiently power a wide range of electronic devices.
The gull wing terminal form offers secure solder connections for robust electrical connections.
The pulse width modulation control technique provides accurate and efficient regulation of the output voltage.
The buck switcher configuration offers step-down voltage conversion, making it suitable for various power supply applications.
The small terminal pitch allows for high-density mounting, making this product suitable for compact electronic designs.
Switching Regulators & Controllers LNK305DN-TL attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Additional Features:
Other IC type:
Control Technique:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LNK305DN-TL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - TR Moisture Pkg Chg 2/Jul/2021
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Changzhou Galaxy Century Microelectronics
1N4148WT
Sangdest Microelectronics (Nanjing)
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Lite-on Semiconductor
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM60430DRPKR
LM60430DRPKR by Texas Instruments is a switching regulator with 1 function, operating at -40 to 150°C. It has a max output current of 3A and supports pulse width modulation control technique. Ideal for automotive applications due to AEC-Q100 screening level and compact chip carrier package style.
LM2678S-ADJ/NOPB
LM2678S-ADJ/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 1.23V to 37V. It is ideal for automotive applications due to its small outline package style and pulse width modulation control technique at a max output current of 5A.
LT8641EUDC#TRPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN5331SX
FAN5331SX by Onsemi is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 85°C and supports input voltage range of 2.7-5.5V. With a max output current of 1A and PWM control technique, it's ideal for boost applications in industrial settings.
TL494IDR
TL494IDR by Texas Instruments is a voltage-mode switching controller with 16 terminals, operating at -40 to 85°C. It features a nominal output voltage of 5V, PWM control technique, and push-pull switcher config. Ideal for industrial applications requiring precise regulation in compact designs up to 300 kHz frequency.
SG3525AN
Linfinity Microelectronics
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS63070RNMR
TPS63070RNMR by Texas Instruments is a 15-terminal switching regulator with a max output current of 2A and a control technique of pulse width modulation. It operates b/w -40 to 125°C, making it suitable for automotive applications requiring efficient power management in compact spaces. With a buck-boost switcher config and max switching frequency of 2800 kHz, it offers reliable performance in various electronic systems.
PTN78060WAZ
PTN78060WAZ by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 85°C, and output voltage ranging from 2.5V to 12.6V. Ideal for industrial applications, this hybrid technology device offers a max output current of 3A and operates at a frequency of up to 660kHz in a buck configuration.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN;
LM2674M-3.3/NOPB
LM2674M-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V output, ideal for automotive applications. It operates b/w -40 to 125°C, handles up to 0.5A output current, and supports input voltages from 6.5V to 40V. The package is small outline with dual terminals and matte tin finish, making it suitable for compact designs requiring efficient power regulation at high temperatures.
LM2675MX-12/NOPB
LM2675MX-12/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 12V nominal output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its DMOS technology and wide temperature range (-40 to 125°C).
LM2596SX-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
EN5322QI
Altera
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS60403DBVR
TPS60403DBVR by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a switched capacitor converter with input voltage range of 1.8-5.25V.
TPS63900DSKT
TPS63900DSKT by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage range from 1.8V to 5V. It is ideal for industrial applications requiring a compact design and low supply current of 0.00001mA. The device utilizes pulse width modulation control technique in a buck-boost configuration for efficient power management.
LMR16030PDDAR
LMR16030PDDAR by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 50V max output voltage. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 125°C. This compact device offers pulse width modulation control technique and operates at a max switching frequency of 2500 kHz.
TPS62130RGTT
TPS62130RGTT by Texas Instruments is a switching regulator with a 12V nominal input voltage and 3A max output current. It operates in voltage-mode control with a max switching frequency of 2500 kHz, making it suitable for industrial applications requiring efficient power conversion. The chip carrier package style with very thin profile and no-lead terminal form enhances space-saving design possibilities.
TPS54140ADRCR
TPS54140ADRCR by Texas Instruments is a switching regulator with 1.5A output current, 39V max output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with a small outline package style.
LM2576HVT-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
UCC28C45DRG4
UCC28C45DRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in industrial temperature grade range from -40 to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The small outline package with gull wing terminals and pulse width modulation control technique enhances its versatility in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LNK304PN
Power Integrations
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LNK306PN
LNK306PN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. The package style is in-line with 8 terminals and a rectangular shape, ideal for through-hole mounting.
LNK304DN-TL
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LNK304GN-TL
LNK304GN-TL by Power Integrations is a switching regulator with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 0.4A and PWM control technique, it is ideal for buck converter designs up to 70 kHz frequency.
LNK306GN-TL
LNK306GN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 1.4A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
LNK304DN
LNK304DN by Power Integrations is a switching regulator IC with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of up to 70 kHz in automotive applications. The package is small outline, rectangular in shape, and surface mountable for compact designs.
LNK306DN-TL
LNK306DN-TL by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, operates b/w -40 to 125°C, and comes in a small outline rectangular package suitable for surface mount assembly.
LNK302DG-TL
LNK302DG-TL by Power Integrations is a switching regulator with a max output current of 0.2A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. The device operates in temperatures ranging from -40°C to 125°C, making it suitable for various automotive power management systems.
LNK306GN
LNK306GN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. With surface mount capability and dual terminal position, it offers efficient power management in compact designs.
LNK304DG-TL
LNK305PN
LNK305PN by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 0.8 A and operates at a frequency of 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK306DN
LNK306DN by Power Integrations is a switching regulator with 1.4A output current and 70kHz max frequency, suitable for automotive applications. It features a small outline package with dual terminals and operates b/w -40°C to 125°C. The device uses pulse width modulation control technique in a buck switcher configuration.
LNK304GN
LNK306DG-TL
LNK302GN
LNK305GN
LNK305GN by Power Integrations is a switching regulator with a max output current of 0.8A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a temperature grade of AUTOMOTIVE and pulse width modulation control technique. The package style is small outline with GULL WING terminal form, making it suitable for surface mount assembly.
LNK305DN
LNK304DG
LNK304DG by Power Integrations is a switching regulator IC with a max output current of 0.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring pulse width modulation control technique in a small outline package suitable for surface mount assembly.
LNK304GTL
LNK305D-TL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved