Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LNK302DG-TL by Power Integrations is a switching regulator with a max output current of 0.2A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. The device operates in temperatures ranging from -40°C to 125°C, making it suitable for various automotive power management systems.
Median Price
$0.750
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.623
1k+ parts
$0.581
10k+ parts
-
Mouser Electronics
$0.560
$0.498
Newark
$0.762
$0.625
$0.521
EBV Elektronik
Future Electronics
$0.475
Verical
$1.027
Nova Conductors
$0.605
TME
Vyrian
NAC Semi
$0.891
IBS Electronics
$0.704
Rebound Electronics
Diverse Electronics
Component Sense
Bristol Electronics
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
Pegasus Components GmbH
LIBRA Elektronik GmbH
Argo Parts USA
$0.587
Netroflash
Continental Prestige Electronics
$1.220
$0.701
$0.490
Corohmni
$14.971
Aztec Data Supply Inc.
$16.100
Eastek
$0.910
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
Metaverse IC Inc.
Lixinc
Kepictronics
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
S.R.D Solutions
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
The use of plastic/epoxy material makes this product lightweight and durable, ideal for various applications.
With surface mount capability, this product is easy to integrate into PCBs, saving space and reducing assembly time.
The rectangular shape of the package allows for efficient placement on the circuit board, optimizing layout design.
With 8 terminals, this product provides flexibility in connecting to other components and peripherals in the system.
The small outline package style minimizes the overall footprint of the product, suitable for compact designs.
The high maximum operating temperature ensures reliable performance in harsh environmental conditions.
The low minimum operating temperature allows this product to operate in cold environments without any issues.
The matte tin terminal finish provides excellent solderability and corrosion resistance, ensuring robust connections.
The dual terminal position offers flexibility in circuit board layout and ease of connection with other components.
The low maximum seated height allows for a compact design, suitable for space-constrained applications.
Switching Regulators & Controllers LNK302DG-TL attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Additional Features:
Other IC type:
Control Technique:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LNK302DG-TL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Improved Passivation 23/Jun/2015
PCN Packaging - TR Moisture Pkg Chg 2/Jul/2021
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Shanghai Lunsure Electronic Technology
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Rfe International
LM2594M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS62110MRSAREP
Texas Instruments
TPS62110MRSAREP by Texas Instruments is a voltage-mode switching regulator with 1.5A output current, ideal for military applications. It operates b/w -55 to 125°C, with a wide input voltage range of 3.1V to 17V and a max output voltage of 16V. The chip carrier package style has a very thin profile and is surface mountable, making it suitable for compact designs.
LM2596S-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS560430YFDBVT
TPS560430YFDBVT by Texas Instruments is a switching regulator with a max output current of 0.6A and max output voltage of 24V, ideal for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact package style suitable for space-constrained designs.
LMZ23603TZX/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Maximum Output Current: 3 A; Peak Reflow Temperature (C): 245;
UC2825DWTRG4
UC2825DWTRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 2A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring precise voltage regulation in compact designs. The IC features pulse width modulation control technique and push-pull switcher configuration, ideal for applications demanding efficient power conversion with minimal footprint.
LTM8074IY#PBF
Analog Devices
LTM8074IY#PBF by Analog Devices is a switching regulator with 25 terminals, operating temperature range of -40 to 125°C, and max frequency of 2200 kHz. Ideal for automotive applications due to its fine pitch grid array package style and pulse width modulation control technique.
LMZ22005TZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Pitch: 1.27 mm; Terminal Finish: MATTE TIN; Qualification: Not Qualified;
LTC3892EUH-2#PBF
LTC3892EUH-2#PBF by Analog Devices is a current-mode switching controller with buck configuration. It operates in automotive-grade temperature range from -40 to 125°C, suitable for various applications. With a wide input voltage range of 4.5V to 60V, it delivers a nominal output voltage of 3.3V efficiently.
FAN5331SX
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2576HVT-ADJLF03
LM2576HVT-ADJLF03 by National Semiconductor is a VOLTAGE-MODE switching regulator with 5 terminals, capable of 3A output current at a max frequency of 63kHz. Its PLASTIC/EPOXY body and IN-LINE style make it suitable for power supply applications requiring efficient voltage regulation.
LM2675MX-ADJ/NOPB
TPSM84209RKHT
TPSM84209RKHT by Texas Instruments is a switching regulator with 9 terminals, operating temperature range of -40 to 85°C, and output current up to 2.5A. Ideal for industrial applications requiring a compact chip carrier package with pulse width modulation control and buck-boost configuration.
LM22675MRX-5.0/NOPB
LM22675MRX-5.0/NOPB by Texas Instruments is a switching regulator with 1A output current, 500kHz max switching frequency, and VOLTAGE-MODE control technique. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact design with low profile heat sink package style.
TL494CDR2G
TL494CDR2G by Onsemi is a 16-terminal switching controller with a max output current of 0.5A and a control mode of voltage-mode PWM. It operates b/w temperatures of 0 to 70°C, making it suitable for various commercial applications requiring pulse width modulation control techniques at frequencies up to 200kHz.
L7987LTR
L7987LTR by STMicroelectronics is a voltage-mode switching regulator with 16 terminals, operating at a max frequency of 1650 kHz. With a max output current of 3.45 A and input voltage range from 4.5 V to 61 V, it is ideal for applications requiring efficient power conversion in compact spaces.
AOZ1282CI-2
Alpha & Omega Semiconductor
SWITCHING REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
LM25145RGYR
LM25145RGYR by Texas Instruments is a voltage-mode switching controller with a max output current of 30A and a max switching frequency of 1000kHz. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications requiring efficient power management. The chip carrier package style with very thin profile and matte tin terminal finish ensures reliable performance in compact spaces.
LMR14030SDDA
LMR14030SDDA by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 36V and current of 3.5A, suitable for automotive applications due to its low profile design and pulse width modulation control technique. With a compact size of 4.9mm x 3.9mm x 1.7mm, it is ideal for space-constrained environments requiring efficient power management up to 2500kHz switching frequency.
MC33063AQDRQ1
MC33063AQDRQ1 by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages ranging from 1.25V to 40V. It operates in automotive-grade temperatures (-40°C to 125°C) with a max output current of 1.5A, making it ideal for automotive applications requiring efficient power management.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LNK304PN
Power Integrations
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LNK306PN
LNK306PN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. The package style is in-line with 8 terminals and a rectangular shape, ideal for through-hole mounting.
LNK304DN-TL
LNK304GN-TL
LNK304GN-TL by Power Integrations is a switching regulator with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 0.4A and PWM control technique, it is ideal for buck converter designs up to 70 kHz frequency.
LNK306GN-TL
LNK306GN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 1.4A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
LNK304DN
LNK304DN by Power Integrations is a switching regulator IC with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of up to 70 kHz in automotive applications. The package is small outline, rectangular in shape, and surface mountable for compact designs.
LNK306DN-TL
LNK306DN-TL by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, operates b/w -40 to 125°C, and comes in a small outline rectangular package suitable for surface mount assembly.
LNK306GN
LNK306GN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. With surface mount capability and dual terminal position, it offers efficient power management in compact designs.
LNK304DG-TL
LNK305PN
LNK305PN by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 0.8 A and operates at a frequency of 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK306DN
LNK306DN by Power Integrations is a switching regulator with 1.4A output current and 70kHz max frequency, suitable for automotive applications. It features a small outline package with dual terminals and operates b/w -40°C to 125°C. The device uses pulse width modulation control technique in a buck switcher configuration.
LNK304GN
LNK306DG-TL
LNK302GN
LNK305GN
LNK305GN by Power Integrations is a switching regulator with a max output current of 0.8A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a temperature grade of AUTOMOTIVE and pulse width modulation control technique. The package style is small outline with GULL WING terminal form, making it suitable for surface mount assembly.
LNK305DN-TL
LNK305DN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.8A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK305DN
LNK304DG
LNK304DG by Power Integrations is a switching regulator IC with a max output current of 0.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring pulse width modulation control technique in a small outline package suitable for surface mount assembly.
LNK304GTL
LNK302D-TL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved