Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LNK302GN by Power Integrations is a switching regulator with a max output current of 0.2A and a max operating temperature of 125°C. It features pulse width modulation control technique, suitable for automotive applications due to its compact rectangular package style and dual terminal position. With surface mount capability and buck switcher configuration, it offers efficient power management solutions in various electronic devices.
Median Price
$0.742
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
$0.703
10k+ parts
$0.683
Nova Conductors
$0.485
Bristol Electronics
$1.313
$0.486
$0.420
Vyrian
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Ashlea Components Ltd
LWI Electronics Inc
Bastille Electronics
$0.461
$0.438
$0.432
Argo Parts USA
$0.470
Continental Prestige Electronics
$0.475
AZTECH Wire
$0.660
$0.630
$0.620
$0.610
Corohmni
$19.616
Aztec Data Supply Inc.
$22.355
Formix International (Excess)
Infinite Electronics LLP (Excess)
Lixinc
Cyclops Electronics Ltd (Excess)
Authorized Procurement Solutions
Component Stockers USA
Provides durability and reliability for the product.
Allows for easy installation and saves space on the PCB.
Facilitates easy handling and mounting on the circuit board.
Provides multiple connection points for versatility in circuit design.
Saves space on the PCB and allows for compact designs.
Ensures stability and performance in high-temperature environments.
Can operate in a wide range of temperatures for versatility.
Provides corrosion resistance and ensures reliable connections.
Allows for flexibility in circuit layout and connections.
Low profile design for space-constrained applications.
Compact size for space-saving designs.
Efficient power management for optimal performance.
Ensures proper soldering during assembly.
Optimal length for easy integration into the circuit.
Suitable for automotive applications with temperature variations.
Provides fast response time for dynamic power needs.
Sufficient current output for various applications.
Easy surface mounting and secure connections to the PCB.
Efficient control method for regulating output voltage.
Efficient power conversion for voltage step-down applications.
Standard spacing for easy PCB layout and assembly.
Suitable for use in various environments with different moisture levels.
Switching Regulators & Controllers LNK302GN attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Additional Features:
Other IC type:
Control Technique:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LNK302GN Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Wire Bonding Chg 21/Mar/2016
PCN Assembly/Origin - Mult Dev Site Add 30/Jul/2020
PCN Packaging - Mult Dev Ship Pkg Chgs 25/Mar/2020
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
SPC TECHNOLOGY/ MULTICOMP
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Silicon Standard
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM5156HPWPR
LM5156HPWPR by Texas Instruments is a switching controller with a 12V nominal input voltage, operating b/w -40 to 150°C. It features a buck-boost switcher configuration, supports up to 300V output voltage, and has a max switching frequency of 2200 kHz. Ideal for automotive applications due to AEC-Q100 screening level.
PLMR50410XDBVR
PLMR50410XDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 150°C. It has a buck switcher configuration, supporting input voltages from 4-36V and output currents up to 1A. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
LM2675MX-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2841XMK-ADJL/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54331DR
TPS54331DR by Texas Instruments is a switching regulator with 3A output current, 570kHz max frequency, and 150°C operating temp. Ideal for automotive applications due to its pulse width modulation control technique and buck switcher configuration.
LM3150MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646EDE-1#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
EMC2305-1-AP-TR
Standard Microsystems
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TPS54302DDCR
TPS54302DDCR by Texas Instruments is a switching regulator with 3A output current, 400kHz max frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its compact size, PWM control mode, and buck switcher configuration.
LM2671M-5.0/NOPB
LM2671M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40 to 125°C, has a buck switcher configuration, and supports pulse width modulation control technique up to 400kHz frequency.
CHL8316CRT
Switching Regulator or Controllers;
UCC28950TPWRQ1
UCC28950TPWRQ1 by Texas Instruments is a switching controller with a current-mode control technique, operating at a max frequency of 1000 kHz. It has a nominal output voltage of 5 V and can handle a max output current of 0.1 A. This industrial-grade device is suitable for applications requiring precise voltage regulation in automotive electronics and other industrial systems.
TPS61022RWUR
TPS61022RWUR by Texas Instruments is a switching regulator with a max output current of 10A and a max switching frequency of 1000kHz. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM2670S-ADJ/NOPB
LM2670S-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output of 37V and 3A current. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its small outline package and pulse width modulation control technique. With a wide input range of 6.5-40V, this buck switcher offers efficient power conversion up to 400kHz frequency.
LM22672MRE-ADJ/NOPB
LM22672MRE-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring efficient power management. With a compact package style and low profile design, this IC offers precise control through pulse width modulation technique at a high switching frequency of up to 1000 kHz.
LM25011MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
TPS55340PWP
TPS55340PWP by Texas Instruments is a switching regulator with 14 terminals, operating at -40 to 150°C. It offers a current-mode control technique, PWM mode, and buck-boost configuration. Ideal for automotive applications due to its wide input voltage range of 2.9V to 32V and high output current capability of 7.75A.
LM5122MH/NOPB
LM5122MH/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports a max output voltage of 100V. Ideal for automotive applications, this IC has a compact rectangular package with 20 terminals and can handle input voltages ranging from 3V to 65V.
TPS63030DSKR
TPS63030DSKR by Texas Instruments is a switching regulator with a max output voltage of 5.5V and max output current of 0.4A, suitable for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact square package style measuring 2.5mm x 2.5mm x 0.8mm.
LM2733XMFX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LNK304PN
Power Integrations
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LNK306PN
LNK306PN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. The package style is in-line with 8 terminals and a rectangular shape, ideal for through-hole mounting.
LNK304DN-TL
LNK304GN-TL
LNK304GN-TL by Power Integrations is a switching regulator with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 0.4A and PWM control technique, it is ideal for buck converter designs up to 70 kHz frequency.
LNK306GN-TL
LNK306GN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 1.4A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
LNK304DN
LNK304DN by Power Integrations is a switching regulator IC with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of up to 70 kHz in automotive applications. The package is small outline, rectangular in shape, and surface mountable for compact designs.
LNK306DN-TL
LNK306DN-TL by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, operates b/w -40 to 125°C, and comes in a small outline rectangular package suitable for surface mount assembly.
LNK302DG-TL
LNK302DG-TL by Power Integrations is a switching regulator with a max output current of 0.2A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. The device operates in temperatures ranging from -40°C to 125°C, making it suitable for various automotive power management systems.
LNK306GN
LNK306GN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. With surface mount capability and dual terminal position, it offers efficient power management in compact designs.
LNK304DG-TL
LNK305PN
LNK305PN by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 0.8 A and operates at a frequency of 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK306DN
LNK306DN by Power Integrations is a switching regulator with 1.4A output current and 70kHz max frequency, suitable for automotive applications. It features a small outline package with dual terminals and operates b/w -40°C to 125°C. The device uses pulse width modulation control technique in a buck switcher configuration.
LNK304GN
LNK306DG-TL
LNK305GN
LNK305GN by Power Integrations is a switching regulator with a max output current of 0.8A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a temperature grade of AUTOMOTIVE and pulse width modulation control technique. The package style is small outline with GULL WING terminal form, making it suitable for surface mount assembly.
LNK305DN-TL
LNK305DN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.8A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK305DN
LNK304DG
LNK304DG by Power Integrations is a switching regulator IC with a max output current of 0.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring pulse width modulation control technique in a small outline package suitable for surface mount assembly.
LNK304GTL
LNK302DG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved