Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LNK304DN-TL by Power Integrations is a switching regulator with a max output current of 0.4A and a max switching frequency of 70kHz. It is designed for automotive applications, operates b/w -40 to 125°C, and features pulse width modulation control technique.
Median Price
$0.983
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.820
100+ parts
$0.682
1k+ parts
$0.627
10k+ parts
$0.568
DigiKey
$0.681
$0.643
-
Newark
$0.845
$0.701
$0.661
Farnell
$0.713
$0.608
$0.607
Element14
$1.170
$0.967
$0.824
$0.819
EBV Elektronik
Verical
$2.344
Future Electronics
$1.500
Nova Conductors
$0.668
Maritex
$0.688
$0.611
$0.529
$0.468
TME
$0.766
$0.588
$0.521
IBS Electronics
$0.754
NAC Semi
$3.000
Vyrian
Chip Stock
Kruse Electronics AG
Kruse
Cyclops Electronics Ltd
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Micros sp.j. W. Kędra i J. Lic
$0.998
$0.475
Micros
$0.783
$0.757
Goldney Electronics S.L.
Partservice
$0.838
$0.741
Zilex Electronics Inc.
Bristol Electronics
Continental Prestige Electronics
$0.655
Argo Parts USA
$0.648
Aztec Data Supply Inc.
$3.450
Advanced Electronics
$14.371
$13.652
Corohmni
$15.221
Component Connect
Eastek
$0.870
ChipstoGo Electronic ltd
RC Electronics
Kepictronics
Infinite Electronics LLP (Excess)
Lixinc
S.R.D Solutions
GlobX GmbH
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Authorized Procurement Solutions
Netroflash
$0.635
$0.621
Plastic/Epoxy material provides durability and reliability for the product.
Surface mount technology allows for easy and efficient installation on circuit boards.
Rectangular shape saves space and allows for compact design.
Having 8 terminals provides flexibility and options for connection.
Small outline package style is suitable for applications where space is limited.
High maximum operating temperature ensures stability and performance in various environments.
Low minimum operating temperature allows for use in extreme cold conditions.
Matte Tin finish provides reliable electrical connections.
Dual terminal position offers redundancy for enhanced reliability.
Low seated height allows for compact and slim designs.
Narrow width enables efficient use of space on the circuit board.
Being a switching regulator, this product offers energy efficiency and precise voltage regulation.
Short time at peak reflow temperature prevents damage to sensitive components during assembly.
High peak reflow temperature ensures proper soldering and strong joints.
Compact length contributes to the overall space-saving design of the product.
Automotive temperature grade indicates that the product can withstand harsh conditions in automotive applications.
High switching frequency allows for fast response and efficient operation.
Able to deliver maximum output current of 0.4 A for powering various components.
Gull wing terminal form provides strong mechanical connection.
Pulse width modulation control technique offers precise regulation of output voltage.
Buck switcher configuration efficiently steps down voltage and reduces energy waste.
Fine terminal pitch allows for high-density mounting on the circuit board.
Switching Regulators & Controllers LNK304DN-TL attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Additional Features:
Other IC type:
Control Technique:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LNK304DN-TL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Improved Passivation 23/Jun/2015
PCN Packaging - TR Moisture Pkg Chg 2/Jul/2021
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Diotec Semiconductor Ag
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LTC3892EUH-2#PBF
Linear Technology
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
EN5322QI-T
Enpirion
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM22676MRE-5.0/NOPB
Texas Instruments
LM22676MRE-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and 3A max output current. It operates b/w -40 to 125°C, ideal for automotive applications due to its low profile design and high efficiency at up to 500kHz switching frequency.
TPS63060DSCT
TPS63060DSCT by Texas Instruments is a switching regulator with a max output current of 1.3A and a max output voltage of 8V. It operates in industrial temperature range (-40 to 85°C) and uses pulse width modulation for control, making it suitable for various applications requiring efficient power conversion.
LM3578AMX/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54062DGKR
TPS54062DGKR by Texas Instruments is a switching regulator with a max output voltage of 58V and max output current of 0.05A, suitable for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact package style ideal for space-constrained designs.
LM2675M-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM25011AQ1MYX/NOPB
LM25011AQ1MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and surface-mount capability, it offers high efficiency with a max switching frequency of 2000 kHz.
SG3525AN
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS62097RWKR
TPS62097RWKR by Texas Instruments is a switching regulator with 2A output current, 2500kHz max switching frequency, and 3.6V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style.
CHL8316CRT
Infineon Technologies
Switching Regulator or Controllers;
MP9486AGN-Z
Monolithic Power Systems
MP9486AGN-Z by Monolithic Power Systems is a voltage-mode switching regulator with a 60V nominal input and output voltage, operating b/w -40 to 125°C. This small outline IC has a max switching frequency of 1MHz, making it suitable for automotive applications requiring efficient buck converter control.
UC3843BVD1R2G
UC3843BVD1R2G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. Ideal for industrial applications, it operates b/w -40 to 105°C, with input voltage range from 12-25V.
LTC3892EUH-2#PBF by Analog Devices is a current-mode switching controller with buck configuration. It operates in automotive-grade temperature range from -40 to 125°C, suitable for various applications. With a wide input voltage range of 4.5V to 60V, it delivers a nominal output voltage of 3.3V efficiently.
UCC28180DR
UCC28180DR by Texas Instruments is a current-mode power factor controller with a max operating temperature of 125°C. It features a switching frequency of 250 kHz and is suitable for boost switcher configurations in automotive applications. The package style is small outline, making it ideal for surface mount designs with 8 terminals.
LM2576HVT-ADJLF03/NOPB
Texas Instruments' LM2576HVT-ADJLF03/NOPB is a 5-terminal switching regulator with max output current of 3A, operating b/w -40 to 125°C. Ideal for automotive applications, it supports input voltage range from 8V to 60V and offers a max switching frequency of 63kHz in a flange mount package.
LM22676MRE-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
LM22675MRE-5.0/NOPB
LM22675MRE-5.0/NOPB by Texas Instruments is a VOLTAGE-MODE switching regulator with 1A output current, ideal for automotive applications. It operates b/w -40 to 125°C, supporting input voltages from 4.5V to 42V and providing a stable output of 5V at up to 500kHz switching frequency.
TPS61170QDRVRQ1
TPS61170QDRVRQ1 by Texas Instruments is a switching regulator with 1.44A output current, operating b/w -40 to 125°C. It features a buck-boost switcher config, PWM control mode, and supports input voltages from 3V to 18V. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style.
LM3481MMX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 550 kHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LNK304PN
Power Integrations
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LNK306PN
LNK306PN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. The package style is in-line with 8 terminals and a rectangular shape, ideal for through-hole mounting.
LNK304GN-TL
LNK304GN-TL by Power Integrations is a switching regulator with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 0.4A and PWM control technique, it is ideal for buck converter designs up to 70 kHz frequency.
LNK306GN-TL
LNK306GN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 1.4A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
LNK304DN
LNK304DN by Power Integrations is a switching regulator IC with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of up to 70 kHz in automotive applications. The package is small outline, rectangular in shape, and surface mountable for compact designs.
LNK306DN-TL
LNK306DN-TL by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, operates b/w -40 to 125°C, and comes in a small outline rectangular package suitable for surface mount assembly.
LNK302DG-TL
LNK302DG-TL by Power Integrations is a switching regulator with a max output current of 0.2A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. The device operates in temperatures ranging from -40°C to 125°C, making it suitable for various automotive power management systems.
LNK306GN
LNK306GN by Power Integrations is a switching regulator with a max output current of 1.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a small outline package style and pulse width modulation control technique. With surface mount capability and dual terminal position, it offers efficient power management in compact designs.
LNK304DG-TL
LNK305PN
LNK305PN by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 0.8 A and operates at a frequency of 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK306DN
LNK306DN by Power Integrations is a switching regulator with 1.4A output current and 70kHz max frequency, suitable for automotive applications. It features a small outline package with dual terminals and operates b/w -40°C to 125°C. The device uses pulse width modulation control technique in a buck switcher configuration.
LNK304GN
LNK306DG-TL
LNK302GN
LNK305GN
LNK305GN by Power Integrations is a switching regulator with a max output current of 0.8A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring a temperature grade of AUTOMOTIVE and pulse width modulation control technique. The package style is small outline with GULL WING terminal form, making it suitable for surface mount assembly.
LNK305DN-TL
LNK305DN-TL by Power Integrations is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output current of 0.8A and operates at a frequency of up to 70 kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LNK305DN
LNK304DG
LNK304DG by Power Integrations is a switching regulator IC with a max output current of 0.4A and a max switching frequency of 70kHz. It is designed for automotive applications, featuring pulse width modulation control technique in a small outline package suitable for surface mount assembly.
LNK304GTL
LNK304D-TL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved