Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY; Connector Side-1: PLUG STRAIGHT; Connector Side-2: SOCKET STRAIGHT; Rated Voltage: 60 V; Rated Current: 4 A; Shielding: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
$1.265
Northwest PG Solutions
$1.392
AZTECH Wire
$19.380
Electrical Wires & Cables 1536120 attributes and parameters. Explore more Electrical Wires & Cables devices from Phoenix Contact
Approvals (V):
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
Insulator Material:
MIL Conformity:
No. of Conductors:
Rated Current:
Rated Voltage:
Shielding:
Wire & Cable Name:
1536120 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5985-00-050-2509, 5985000502509
NIIN
000502509
PCN Design/Specification - Multiple Devices Product Improvement 16/Aug/2018
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Transistor & Electronic
Taitron Components
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
KYOCERA AVX
12916
Helukabel
Helukabel 12916 is a CE, CSA, and UL approved CONTROL CABLE with STRANDED construction and PVC jacket. Ideal for PLANT ENGINEERING and MACHINERY MANUFACTURING applications. Features include 300V rating, -40 to 80°C operating temp range, and 0.75mm² cross-section area.
M22759/11-22-2
Super-temp Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Approvals (V): MIL-W-22759/11; Maximum Operating Temperature: 200 Cel; Conductor Finish: SILVER;
CO-174BNCRBNC-001
Amphenol
CABLE ASSEMBLY;
31095
WIRE AND CABLE;
135101-02-72.00
M22759/43-22-9
Judd Wire
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Diameter: 1.27 mm; Conductor Material: COPPER; Construction: STRANDED;
24221
Helukabel 24221 is a CE, DIN, EAC, EN, VDE approved CONTROL CABLE with 12 STRANDED copper alloy conductors. It has a rated voltage of 300V and can operate in temperatures ranging from -40 to 80°C. Ideal for installation in dry, moist, and wet environments due to its THERMOPLASTIC ELASTOMER jacket material.
18642
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Conductor Material: BARE COPPER; Jacket Material: POLYURETHANE; Additional Features: STANDARDS: DIN VDE 0285-525-2-21; DIN EN 50525-2-21;
FFSD-05-D-02.00-01-N
Samtec
FFSD-05-D-02.00-01-N by Samtec is a UL approved stranded flat cable with tin conductor finish and PVC insulation. It operates b/w -40 to 105°C, has 10 conductors, each with a cross-section area of 0.0509 mm2. Ideal for high reliability applications requiring a rated current of 2.3A.
3600B/26SF
3m Electronic Products Division
3m Electronic Products Division's 3600B/26SF wire is a POWER-LIMITED cable with 26 conductors, shielded and approved by CUL & UL for 150V. Featuring STRANDED construction, TIN finish, and PVC jacket, it is ideal for electrical applications requiring flexibility and durability.
M17/94-RG179
Glenair
Glenair's M17/94-RG179 is a solid construction cable with FEP jacket, shielding, and silver conductor finish. It operates at temperatures from -55°C to 200°C, rated for 900V. This communication cable uses extruded PTFE insulator material and copper conductor for applications requiring high resistance (0.802 ohm) in a compact 2.54mm diameter wire (AWG 38).
M27500-22ML3T08
TE Connectivity
TE Connectivity's M27500-22ML3T08 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring a copper alloy conductor and 22 AWG wire gauge, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cords and fixture wiring.
TC2050-IDC
Tag-connect
CABLE ASSEMBLY; Connector Side-1: IDC CONNECTOR; Connector Side-2: 10P TAG-CONNECT; Shielding: NO;
3365/40300
35669
Cables To Go
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: USB 2.0 B MALE; Shielding: YES; MIL Conformity: NO; Conductor Material: COPPER ALLOY;
M17/60-RG142
Elspec
WIRE AND CABLE; Rated Voltage: 1900 V; Shielding: YES; Maximum Operating Temperature: 200 Cel; Conductor Finish: SILVER; Approvals (V): MIL;
3051BK005
Alpha Wire
3051BK005 by Alpha Wire is a CSA/UL approved stranded wire with 300V rating. Featuring tin finish, PVC insulation, and copper alloy conductor, it operates b/w -40 to 105 °C. Ideal for flexible cords and fixtures due to its 22 AWG gauge and 0.326 mm2 cross-section area.
107-3
Standard Wire & Cable
Standard Wire & Cable 107-3 is a MIL-approved electrical wire with stranded construction, nylon jacket, and tin finish. It has a rated voltage of 600V, insulator made of PVC, and operates up to 105°C. Ideal for flexible cord and fixture wire applications due to its copper conductor material and resistance of 0.02 ohm.
PXP6040/B/5M00
Bulgin
Bulgin PXP6040/B/5M00 is a UL-approved communication cable with PVC jacket, 4 conductors, and USB A male to USB B male connectors. It has a cross-section area of 0.08 mm2, rated voltage of 30V, and rated current of 1A. Ideal for applications requiring reliable data transfer in environments with temperatures ranging from 0°C to 70°C.
19034
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
153660984
Molex
CABLE ASSEMBLY; Connector Side-1: FFC; Connector Side-2: FFC; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: YES;
153660989
153661048
Molex 153661048 is a UL-approved shielded flat cable with a rated voltage of 60V. It has a tin conductor finish and can operate in temperatures ranging from -40 to 105 °C. This cable assembly, made of copper, is suitable for FFC connectors and has a cross-section area of 0.015 mm2.
153660215
153661049
153660219
153660537
153660211
Molex 153660211 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating range. Ideal for FFC connectors in applications requiring 0.015mm2 copper conductor and 1.46 ohm resistance at 0.5A current.
153660119
153660207
153660317
Molex 153660317 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660097
153660427
153661028
153660431
153661029
Molex 153661029 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660101
1536146
Phoenix Contact
1536117
1536159
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved