Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 153660427 is a UL-approved flat cable with shielding, rated for 60V and -40 to 105°C. Featuring tin-finished copper conductor, it has a cross section area of 0.015 mm2 and resistance of 1.46 ohm. Ideal for FFC connectors, this 0.051mm long cable supports up to 0.5A current in electrical applications.
Median Price
$3.100
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$2.550
100+ parts
-
1k+ parts
10k+ parts
RS Americas
Chip1Stop
$6.150
Digiode
$2.945
Nova Conductors
$4.580
Vyrian
VNN
Corphita
$2.790
Allen Electronics Distributors
Continental Prestige Electronics
$4.488
Netroflash
$4.351
$4.259
Andel Nordic
$5.059
$4.857
AZTECH Wire
$16.848
Argo Parts USA
Having UL approval ensures that this product meets safety and quality standards set by a trusted organization.
Shielding helps protect the signal from electromagnetic interference, ensuring reliable transmission.
Suitable for low voltage applications, providing the necessary power without risk of overload.
Tin finish on the conductor enhances conductivity and corrosion resistance, improving the overall performance and lifespan of the cable.
With a high maximum operating temperature, this cable can withstand elevated temperatures without performance degradation.
The cable remains functional even in extremely cold conditions, making it suitable for various environments.
The smaller wire gauge allows for more flexibility and easier installation in tight spaces.
The specified length ensures that the cable is suitable for specific applications and reduces waste.
The cross-sectional area indicates the carrying capacity of the cable and its ability to handle current flow.
Copper conductors offer superior conductivity and durability, ensuring efficient signal transmission and longevity of the cable.
Low resistance helps to minimize power loss and heat generation, improving the overall efficiency of the cable.
The specified rated current indicates the maximum safe current that the cable can carry, ensuring reliable and safe operation.
Flat cables are space-saving and easier to route in tight spaces, making them ideal for applications where traditional round cables may be cumbersome.
Electrical Wires & Cables 153660427 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Length:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1856/19RD005
Alpha Wire
The Alpha Wire 1856/19RD005 is a stranded electrical wire with 600V rating, TIN conductor finish, and PVC insulation. Ideal for flexible cord and fixture wiring applications. Features include 20 AWG gauge, 1.52mm diameter, and operating temperatures from -55°C to 105°C.
P046-06N-T
Tripp Lite
CABLE ASSEMBLY;
M22759/11-22-9125
Carlisle Interconnect Technologies
Carlisle Interconnect Technologies' M22759/11-22-9125 wire is MIL-approved, stranded with silver finish, and PTFE-insulated. It operates b/w -55 to 200 °C, with a resistance of 0.0495 ohm. Ideal for smoke emission, overload stability, and flammability applications.
44A0111-28-906
TE Connectivity's 44A0111-28-906 is a flexible cord with copper alloy conductor, rated for 600V. Featuring PVDF insulation and TIN finish, it operates b/w -65°C to 135°C. Ideal for various electrical applications requiring a max wire size of 0 AWG.
M22759/11-20-9
Specialty Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 200 Cel; Construction: STRANDED; Conductor Material: COPPER;
3021007-06
Qualtek Electronics
151670321
Molex
Molex 151670321 flat cable with 16 conductors, rated for 60V and 0.5A. Constructed with tin-finished copper alloy conductors and polyester insulator. UL approved, suitable for applications requiring -40 to 105 °C operating temperature range.
982670431
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 26;
15712
Helukabel
Helukabel 15712 is a stranded electrical wire with PVC insulation, rated for 450V. It has CE and EAC approvals, DIN conformity, and operates b/w -15 to 80°C. With a cross-section area of 1.5mm² and AWG of 16, it's ideal for switch cabinet construction and lab measurement setups.
830030091000
Belden
Belden 830030091000 is a UL-approved flexible cord with stranded silver-coated copper conductor (24 AWG). Featuring TFE insulation, it has a diameter of 1.118 mm and stranding of 19X36. Ideal for electrical applications requiring flexibility and durability.
982670409
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 24;
TCSD-10-D-04.00-01-N
Samtec
Samtec's TCSD-10-D-04.00-01-N is a UL-approved stranded flat cable with 20 conductors, each made of tin-coated copper alloy. It has a rated voltage of 300V and can handle temperatures from -40 to 105°C. Ideal for applications requiring reliable electrical connections in tight spaces.
3365/26
3m Electronic Products Division
The 3m Electronic Products Division's 3365/26 is a UL-approved FLAT FLEXIBLE CABLE with 26 conductors of TINNED COPPER. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and durability in various environments.
3055/1SL001
Alpha Wire 3055/1SL001 is a CE, CSA, IEC, and UL approved solid wire with a rated voltage of 300V. Featuring tin conductor finish and PVC insulation, it operates b/w -40 to 105°C. Ideal for applications requiring flexible cord and fixture wire in various industries.
CAU3AA-05M
Infinite Electronics International
CAU3AA-05M by Infinite Electronics International is an UL approved USB 3.0 cable with PVC jacket and shielding. It features USB A 3.0 MALE connectors on both sides, 8 conductors, ideal for high-speed data transfer applications.
32860
WIRE AND CABLE;
371120103000
2451320210
Molex 2451320210 wire is UL approved with a rated voltage of 300V, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for reliable electrical connections.
55A0111-28-3
TE Connectivity's 55A0111-28-3 wire is a stranded copper alloy cable with 28 AWG and rated for 600V. With a temperature range of -65 to 150 °C, it is ideal for general purpose and lightweight applications like flexible cords and fixtures.
430450400
Habia Cable Ab
Habia Cable Ab's 430450400 is a MIL-approved stranded wire with tin finish, HFI140 insulation, and copper conductor. It operates b/w -30 to 120 °C and has a cross section area of 4 mm2. Ideal for SEAGUARD, DEFENCE, HABIATRON, and RAILGUARD applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
153660984
CABLE ASSEMBLY; Connector Side-1: FFC; Connector Side-2: FFC; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: YES;
153660989
153661048
Molex 153661048 is a UL-approved shielded flat cable with a rated voltage of 60V. It has a tin conductor finish and can operate in temperatures ranging from -40 to 105 °C. This cable assembly, made of copper, is suitable for FFC connectors and has a cross-section area of 0.015 mm2.
153660215
153661049
153660219
153660537
153660211
Molex 153660211 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating range. Ideal for FFC connectors in applications requiring 0.015mm2 copper conductor and 1.46 ohm resistance at 0.5A current.
153660119
153660207
153660317
Molex 153660317 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660097
153661028
153660431
153661029
Molex 153661029 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660101
1536146
Phoenix Contact
1536117
1536159
153660437
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved