Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 151661019 flat cable with UL approval, rated for 60V and 105°C. Features tin finish copper alloy conductor, polyester insulation, and 31 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability in a wide temperature range.
Median Price
$1.773
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Digiode
Aranea Global
$1.738
$1.668
Continental Prestige Electronics
Argo Parts USA
Semicontronic
$3.500
$3.412
$3.395
Aztec Data Supply Inc.
$3.916
Andel Nordic
$7.001
$6.721
AZTECH Wire
$7.487
Corphita
UL approval ensures that the product meets safety and quality standards, making it a reliable choice for electrical applications.
Flat construction makes the cable easy to install and handle, especially in tight spaces or when routing along surfaces.
With a rated voltage of 60V, this cable is suitable for low voltage applications, providing safe and efficient power transmission.
Polyester insulator material offers good electrical insulation properties, protecting the conductors from external factors and ensuring reliable performance.
The high maximum operating temperature of 105°C allows the cable to be used in a wide range of environments without performance degradation.
Copper alloy conductors provide excellent conductivity and durability, ensuring efficient power transmission and longevity of the cable.
Electrical Wires & Cables 151661019 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Additional Features:
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
151661019 Connector Accessories trade compliance attributes, and parameters.
NSN
5305-15-166-1019, 5305151661019
NIIN
151661019
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transys Electronics
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Semtech Electronics
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Vishay Telefunken
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
U038-003
Tripp Lite
CABLE ASSEMBLY;
3600B/50SF
3m Electronic Products Division
3600B/50SF by 3m Electronic Products Division is a stranded electrical wire with a polyvinyl chloride jacket and shielding. It has a rated voltage of 150V and can operate at temperatures up to 75°C. This wire is commonly used for power-limited applications.
AA59569R36T0500
Allied Wire & Cable
WIRE AND CABLE;
3365/16-100SF
3M 3365/16-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated for 300V, AWG 28 gauge, it's ideal for electrical wiring in compact spaces like electronics or appliances.
1200661034
Molex
Wires and Cables;
2147501042
5854/7BK005
Alpha Wire
Alpha Wire's 5854/7BK005 is a MIL and UL approved stranded wire with silver finish, TFE insulator, and copper conductor. Ideal for electronic, medical, and military applications with a temperature range of -60 to 200°C. Features 24 AWG gauge, 1.12mm diameter, and flexible cord type for versatile use.
151670365
Molex 151670365 flat cable with 20 conductors, UL approval, rated for 60V & 0.5A. Constructed with tin-finished copper alloy conductor and polyester insulator. Ideal for electrical wiring applications requiring -40 to 105 °C operating temperature range.
175101-10-M0.75
Amphenol
IDSD-20-D-06.00-T
Samtec
IDSD-20-D-06.00-T by Samtec is a 425V rated flat cable with 40 conductors, each made of copper alloy and tin finish. Featuring PVC insulation, it has a max operating temp of 105°C and is stranded in a 7X28 configuration. Ideal for applications requiring high flexibility and durability in electrical connections.
M16878/4-BJE-9
Standard Wire & Cable
M16878/4-BJE-9 by Standard Wire & Cable is a MIL-approved stranded wire with silver finish, PTFE insulator, and copper conductor. Rated for 600V, it operates up to 200°C. Ideal for electrical applications requiring flexibility like cords and fixtures.
296
The Alpha Wire 296 is a solid construction electrical wire with tin finish, suitable for flexible cord and fixture applications. Featuring a copper alloy conductor with 1X18 stranding, it has a diameter of 1.016mm and can operate b/w temperatures of 0 to 200°C. With a resistance of 0.022 ohm and cross-sectional area of 0.823 mm2, this wire is ideal for various electrical projects.
1110145003
5855BK005
5855BK005 by Alpha Wire is a MIL, NEMA, and UL approved stranded wire with silver finish. Featuring PTFE insulation, it operates b/w -60 to 200°C. Ideal for electronic, medical, and military applications due to its copper alloy conductor and flexible cord design.
C232HM-DDHSL-0
FTDI
The FTDI C232HM-DDHSL-0 cable is ideal for USB to JTAG interfaces. It features a 3.3V rated voltage, CE/FCC/UL approvals, and operates b/w -40°C to 85°C. With a wire gauge of 24 AWG and USB to female header connectors, it supports up to 0.25A current.
87230601000
Belden
Belden 87230601000 is a UL-approved stranded wire with PVC jacket, PP insulator, and tinned copper conductor. With 4 conductors, rated voltage of 300V, and operating temperature range from -20 to 75°C, it's ideal for flexible cord and fixture wire applications.
1099
Adafruit Industries
CABLE ASSEMBLY; Connector Side-1: MICRO USB B MALE; Connector Side-2: MICRO USB-A FEM.; Shielding: NO;
8240010U1000
982670233
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 8;
18615
Helukabel
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Wire Gauge (AWG): 12; Jacket Material: POLYURETHANE; Construction: STRANDED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
151661034
Molex 151661034 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin finish copper alloy conductor, polyester insulator, and 33 conductors of AWG 37. Ideal for electrical wiring applications requiring a max current of 0.35A in limited space environments.
151660427
Molex 151660427 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin-finished copper alloy conductor, polyester insulator, and 40 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability.
151661009
Molex 151661009 is a UL-approved flat cable with a rated voltage of 60V. It features a tin-finished copper alloy conductor and polyester insulator, suitable for applications requiring a max operating temperature of 105°C and min operating temperature of -40°C. With 31 conductors and a wire gauge of AWG37, it has a cross-sectional area of 0.01 mm2 and resistance of 2.2 ohm, making it ideal for electrical wiring needs.
151661014
Molex 151661014 flat cable with UL approval, rated for 60V, features 31 conductors of tin-finished copper alloy. With a max operating temp of 105°C and -40°C min, it's ideal for electrical wiring applications requiring flexibility and durability in various environments.
151660317
Molex 151660317 is a UL-approved flat cable with a rated voltage of 60V. It features a tin conductor finish, polyester insulator material, and can operate b/w -40 to 105 °C. With 30 conductors and a wire gauge of AWG37, it is suitable for various electrical wiring applications.
151660325
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Insulator Material: POLYESTER; Conductor Finish: TIN;
151670321
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; MIL Conformity: NO; Maximum Operating Temperature: 105 Cel;
151660119
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Cross Section Area: .01 mm2; Length: .051 mm;
151661038
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Conductor Finish: TIN;
151660989
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Additional Features: FLAME RESISITANT;
151661059
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Construction: FLAT; Minimum Operating Temperature: -40 Cel;
151660984
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Construction: FLAT; Resistance: 2.2 ohm;
151670313
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Conductor Finish: TIN;
151661013
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Length: .76 mm; Maximum Operating Temperature: 105 Cel;
151660988
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Maximum Operating Temperature: 105 Cel;
151661054
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Minimum Operating Temperature: -40 Cel;
151660215
Molex 151660215 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin-finished copper alloy conductor, polyester insulator, and 20 conductors at 0.01 mm2 cross-section area. Ideal for electrical wiring applications requiring flexibility and durability in various environments.
151661048
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Cross Section Area: .01 mm2; Conductor Finish: TIN;
151661091
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Cross Section Area: .01 mm2; Insulator Material: POLYESTER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved