Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 151670321 flat cable with 16 conductors, rated for 60V and 0.5A. Constructed with tin-finished copper alloy conductors and polyester insulator. UL approved, suitable for applications requiring -40 to 105 °C operating temperature range.
Median Price
$1.750
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Verical
1+ parts
$1.970
100+ parts
-
1k+ parts
$1.910
10k+ parts
Mouser Electronics
$2.510
$1.820
$1.620
DigiKey
$2.670
$1.882
$1.486
Chip1Stop
$2.240
$2.140
Master Electronics
$1.430
$1.320
$1.140
Newark
$1.530
$1.380
Powell Electronics
$1.450
$1.350
Farnell
$1.490
Nova Conductors
$1.570
Digiode
$1.700
TestEquity
VNN
Vyrian
IBS Electronics
$1.788
$1.462
TME
$2.500
$2.170
Semicontronic
$1.346
$1.339
Continental Prestige Electronics
$1.560
$1.529
Argo Parts USA
Netroflash
Corphita
$1.611
Andel Nordic
$6.248
$5.998
Aztec Data Supply Inc.
$7.450
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Having UL approval ensures that this flat cable meets safety and quality standards set by a trusted organization, making it a reliable choice for electrical applications.
With a rated voltage of 60 V, this flat cable is suitable for low voltage applications, providing optimal performance and safety within its specified voltage range.
The tin conductor finish on this flat cable enhances its conductivity and resistance to corrosion, ensuring a reliable connection and longevity of the cable.
The polyester insulator material offers excellent insulation properties, protecting the conductors from external factors and ensuring stable performance over a wide temperature range.
With a maximum operating temperature of 105°C, this flat cable can withstand high temperatures without compromising its performance, making it suitable for various industrial applications.
The low minimum operating temperature of -40°C ensures that this flat cable can function effectively in cold environments, providing reliable operation in a wide range of temperature conditions.
The specified length of 0.152 mm ensures that this flat cable can be easily cut and customized to fit specific installation requirements, offering flexibility and convenience in various applications.
The copper alloy conductor material combines the conductivity of copper with the strength of other metals, providing a reliable and durable connection for electrical signals and power transmission.
With a low resistance of 0.73 ohms, this flat cable minimizes power loss and heat generation, ensuring efficient energy transmission and reducing the risk of overheating in electrical systems.
The rated current of 0.5 A indicates the maximum current that this flat cable can safely carry, making it suitable for low-power applications where a higher current capacity is not required.
Having 16 conductors in this flat cable allows for multiple signal or power lines to be accommodated within a single cable, reducing the need for separate cables and simplifying installation in space-constrained environments.
The flat cable design offers a compact and flexible solution for routing wires in tight spaces or along surfaces, providing easy installation and management of multiple conductors in a streamlined manner.
Electrical Wires & Cables 151670321 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Additional Features:
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire & Cable Name:
151670321 Connector Accessories trade compliance attributes, and parameters.
NSN
5910-15-167-0321, 5910151670321
NIIN
151670321
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
Silicon Transistor
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
12916
Helukabel
Helukabel 12916 is a CE, CSA, and UL approved CONTROL CABLE with STRANDED construction and PVC jacket. Ideal for PLANT ENGINEERING and MACHINERY MANUFACTURING applications. Features include 300V rating, -40 to 80°C operating temp range, and 0.75mm² cross-section area.
3600B/68
3m Electronic Products Division
3600B/68 by 3m Electronic Products Division is a flexible cord and fixture wire with 68 conductors of tinned copper. It has a rated voltage of 50V, UL and CUL approvals, and features stranded construction with PVC jacket for shielding. Ideal for electrical applications requiring flexibility and durability.
5855/7BK001
Alpha Wire
Alpha Wire 5855/7BK001 is a MIL-approved stranded wire with silver finish. Featuring PTFE insulation, it's rated for 600V and operates b/w -60 to 105°C. Ideal for electronic, medical, and military applications due to its flexibility and copper conductor.
M17/113-RG316
Glenair
WIRE AND CABLE; Rated Voltage: 900 V; Shielding: YES; Construction: SOLID; Wire & Cable Name: COMMUNICATION CABLE; Wire Gauge (AWG): 38;
U025-001-PM
Tripp Lite
CABLE ASSEMBLY;
7928A0101000
Belden
Belden 7928A0101000 is a solid construction communication cable with FEP jacket and insulator. It has 8 bare copper conductors, rated for 300V, -70 to 150°C operating temperature range. Approved by CE, CEC, CUL, ISO/IEC, NEC, NEMA. Ideal for electrical wiring applications.
13250
The Helukabel 13250 is a stranded electrical wire with polymer jacket, rated for 600V. It has approvals from BS, CUL, DIN, IEC, UL, VDE and is suitable for fixed installations. With a conductor material of bare copper and operating temperatures ranging from -40 to 80 °C, it is ideal for various applications requiring flexibility and durability.
34105
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Wire & Cable Name: COMMUNICATION CABLE; IEC Conformity: NO; Diameter: 17.5 mm;
34130
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Conductor Material: BARE COPPER; Wire & Cable Name: COMMUNICATION CABLE; Diameter: 11 mm;
18252
The Helukabel 18252 is a CE, DIN, EAC approved cable with stranded construction and polyurethane jacket. It has a rated voltage of 300V and insulator material made of thermoplastic elastomer. This robust cable is ideal for dry, damp, and wet rooms, conforming to DIN standards with operating temperatures ranging from -40°C to 90°C.
55A1816-24-9-9CS2275
TE Connectivity
TE Connectivity's 55A1816-24-9-9CS2275 is a flexible cord and fixture wire with a rated voltage of 600V. Featuring nickel conductor finish, it has a temperature range from -65°C to 200°C. This cable type is commonly used in applications requiring MIL-DTL-27500 compliance.
44A0111-22-900
TE Connectivity's 44A0111-22-900 is a MIL-W-81044 approved wire with 600V rating, suitable for applications requiring flexible cord and fixture wire. Featuring radiation-crosslinked PVF jacket, tin finish conductor, and copper alloy material, it operates b/w -65 to 135 °C with resistance of 0.053 ohm.
CXA-0066-20-4-9CS2973
WIRE AND CABLE;
1943/3BK003
Alpha Wire 1943/3BK003, a 300V electrical cable with CE, CSA, UL approvals. Features twisted construction, PVC jacket & insulator. Ideal for applications requiring -30 to 105°C temperature range and bare copper conductor with 41x30 stranding in a 14 AWG wire.
55A0111-22-98
TE Connectivity's 55A0111-22-98 cable is a stranded wire with tin finish, rated at 600V. With a conductor material of copper alloy and max operating temperature of 150°C, it is ideal for general purpose and lightweight applications. Featuring a wire gauge of 22 AWG, this flexible cord and fixture wire has a diameter of 1.09mm and stranding of 19X34 for versatile use.
095FJZFJZAHM500
Amphenol
6823WH001
Alpha Wire's 6823WH001 is a CE-approved stranded wire with a rated voltage of 300V. Featuring polyphenylene ether insulation, it operates b/w -40 to 110°C. Ideal for flexible cord and fixture wiring applications due to its bare copper conductor and 22 AWG size.
4126C1332-8
TE Connectivity's 4126C1332-8 cable features stranded construction, Thermorad S jacket, and silver conductor finish. With MIL approvals, it is ideal for communication cables in applications requiring shielding and operating temperatures ranging from -65 to 125°C.
M22759/11-20-9
Carlisle Interconnect Technologies
Carlisle's M22759/11-20-9 wire is MIL-approved with stranded construction, rated at 600V. Featuring a silver finish conductor and PTFE insulator, it offers smoke emission resistance and overload stability. With a temperature range of -55 to 200°C, this flexible cord wire is ideal for applications requiring flammability protection.
VHA00009-1M
L-com
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
151661034
Molex
Molex 151661034 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin finish copper alloy conductor, polyester insulator, and 33 conductors of AWG 37. Ideal for electrical wiring applications requiring a max current of 0.35A in limited space environments.
151660427
Molex 151660427 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin-finished copper alloy conductor, polyester insulator, and 40 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability.
151661009
Molex 151661009 is a UL-approved flat cable with a rated voltage of 60V. It features a tin-finished copper alloy conductor and polyester insulator, suitable for applications requiring a max operating temperature of 105°C and min operating temperature of -40°C. With 31 conductors and a wire gauge of AWG37, it has a cross-sectional area of 0.01 mm2 and resistance of 2.2 ohm, making it ideal for electrical wiring needs.
151661019
Molex 151661019 flat cable with UL approval, rated for 60V and 105°C. Features tin finish copper alloy conductor, polyester insulation, and 31 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability in a wide temperature range.
151661014
Molex 151661014 flat cable with UL approval, rated for 60V, features 31 conductors of tin-finished copper alloy. With a max operating temp of 105°C and -40°C min, it's ideal for electrical wiring applications requiring flexibility and durability in various environments.
151660317
Molex 151660317 is a UL-approved flat cable with a rated voltage of 60V. It features a tin conductor finish, polyester insulator material, and can operate b/w -40 to 105 °C. With 30 conductors and a wire gauge of AWG37, it is suitable for various electrical wiring applications.
151660325
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Insulator Material: POLYESTER; Conductor Finish: TIN;
151660119
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Cross Section Area: .01 mm2; Length: .051 mm;
151670365
Molex 151670365 flat cable with 20 conductors, UL approval, rated for 60V & 0.5A. Constructed with tin-finished copper alloy conductor and polyester insulator. Ideal for electrical wiring applications requiring -40 to 105 °C operating temperature range.
151661038
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Conductor Finish: TIN;
151660989
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Additional Features: FLAME RESISITANT;
151661059
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Construction: FLAT; Minimum Operating Temperature: -40 Cel;
151660984
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Construction: FLAT; Resistance: 2.2 ohm;
151670313
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Conductor Finish: TIN;
151661013
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Length: .76 mm; Maximum Operating Temperature: 105 Cel;
151660988
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Maximum Operating Temperature: 105 Cel;
151661054
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Minimum Operating Temperature: -40 Cel;
151660215
Molex 151660215 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin-finished copper alloy conductor, polyester insulator, and 20 conductors at 0.01 mm2 cross-section area. Ideal for electrical wiring applications requiring flexibility and durability in various environments.
151661048
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Cross Section Area: .01 mm2; Conductor Finish: TIN;
151670343
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved