Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 151660317 is a UL-approved flat cable with a rated voltage of 60V. It features a tin conductor finish, polyester insulator material, and can operate b/w -40 to 105 °C. With 30 conductors and a wire gauge of AWG37, it is suitable for various electrical wiring applications.
Median Price
$1.490
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.947
100+ parts
-
1k+ parts
10k+ parts
RS Americas
Mouser Electronics
$2.330
$1.640
$1.500
Arrow
$2.455
$1.727
$1.363
Element14
$2.580
$2.013
$1.555
Newark
$2.670
$2.240
$2.160
Chip1Stop
$2.090
$1.510
TTI Europe
Farnell
$1.470
$1.410
Verical
$1.449
Powell Electronics
$1.280
Digiode
$0.900
Nova Conductors
$1.326
VNN
IBS Electronics
$1.250
Euro-Tech
TME
$2.190
$1.940
Vyrian
Semicontronic
$0.800
$0.780
$0.776
Corphita
$0.852
Argo Parts USA
Continental Prestige Electronics
$1.300
Aztec Data Supply Inc.
$4.954
Andel Nordic
$6.387
$6.132
Perfect Parts
Robosynatics
UL approval ensures that the product meets the safety standards set by Underwriters Laboratories, making it a reliable choice for electrical applications.
Flat construction makes the cable easy to route and manage, particularly in tight spaces where a round cable may be difficult to install.
Suitable for low voltage applications, making it ideal for use in electronic devices and small appliances.
Polyester insulation provides good electrical insulation properties and resistance to heat, enhancing the overall safety and reliability of the cable.
Copper alloy conductors offer high conductivity and durability, ensuring efficient power transmission and longevity of the cable.
Electrical Wires & Cables 151660317 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Additional Features:
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
151660317 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5180-15-166-0317, 5180151660317
NIIN
151660317
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
MMBF170LT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
MBRS130LT3G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
3365/40SF
3m Electronic Products Division
The 3m Electronic Products Division's 3365/40SF is a UL-approved FLAT FLEXIBLE CABLE with TINNED COPPER conductor material. Featuring 40 conductors of 28 AWG, it has a STRANDED construction and operates b/w -20 to 105 °C. Ideal for electrical applications requiring flexibility and durability.
32065
Helukabel
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; DIN Conformity: NO; Minimum Operating Temperature: -40 Cel;
M22759/43-22-9
Judd Wire
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Diameter: 1.27 mm; Conductor Material: COPPER; Construction: STRANDED;
CAB.011
Taoglas
Taoglas CAB.011 cable features stranded construction with FEP jacket and shielding, rated for 30V. Ideal for applications requiring high temperature resistance up to 105°C, it has a copper conductor finished in silver, UL approval, and connectors IPEX MHFI to SMA(F).
M81044/12-16-9
TE Connectivity
TE Connectivity's M81044/12-16-9 is a MIL-DTL-81044 compliant cable with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65°C to 150°C, features 16 AWG wire gauge, and has a cross-section area of 1.23 mm². Ideal for applications requiring flexible cord and fixture wire.
2273125-4
TE Connectivity's 2273125-4 is a 22 AWG communication cable with a rated voltage of 24V and max operating temp of 80°C. Ideal for applications requiring a durable cable with a current rating of 4A, such as in industrial automation systems or electronic control units.
PMHDMF-2
L-com
CABLE ASSEMBLY;
M22759/11-26-9
Harbour Industries
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Stranding: 19X38; Conductor Finish: SILVER;
4160500
Lapp Group Pvt
4160500 by Lapp Group Pvt is a 600V stranded wire with PVC insulation. It has CE, CSA, HAR, UL approvals and operates b/w -40 to 105°C. With tinned copper conductor and 2.5mm² cross-section area, it's ideal for cabling applications requiring flexibility and durability.
8777060U500
Belden
Belden 8777060U500 is a CE, CEC, CUL, NEC, UL approved communication cable with stranded construction and PVC jacket. Featuring tinned copper conductor material and PP insulator for 300V rated voltage. Ideal for applications requiring -20 to 80 °C operating temperature range.
DCPLUG-P1J-R7B
Mean Well Enterprises
151660427
Molex
Molex 151660427 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin-finished copper alloy conductor, polyester insulator, and 40 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability.
2-1437356-9
TE Connectivity 2-1437356-9 is a UL approved stranded cable with PVC jacket, rated for 300V. Featuring 28 AWG copper alloy conductor, it's ideal for ribbon and flat cable applications. With a max current of 2A and temperature range from -20 to 105°C, it offers versatility in various electrical setups.
7000-88081-0100030
Murrelektronik
M22759/16-22-5
Defense Logistics Agency
M22759/16-22-5 by Defense Logistics Agency is a MIL-W-22759 approved wire with 600V rating, stranded construction, and tin finish. Featuring extruded ETFE insulation, it operates up to 150°C and has a copper conductor with 22 AWG. Ideal for flexible cord and fixture wire applications due to its 0.326 mm2 cross-section area.
083096000000
Franz Binder &
WIRE AND CABLE;
44A0111-16-9-MX
TE Connectivity's 44A0111-16-9-MX is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. Featuring 16 AWG copper alloy conductor, it operates b/w -65°C to 150°C temperatures. With a diameter of 1.83mm and stranding of 19X29, it is suitable for FLEXIBLE CORD AND FIXTURE WIRE installations.
M27500-22ML2T08
TE Connectivity's M27500-22ML2T08 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65 to 150°C. Featuring 22 AWG copper alloy conductor, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cords and fixture wires.
982670387
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 22;
M22759/18-26-9
M22759/18-26-9 by Defense Logistics Agency is a MIL-approved stranded wire with 600V rating, ETFE insulation, and copper conductor. It is a flexible cord and fixture wire suitable for applications requiring high temperature resistance up to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
151661034
Molex 151661034 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin finish copper alloy conductor, polyester insulator, and 33 conductors of AWG 37. Ideal for electrical wiring applications requiring a max current of 0.35A in limited space environments.
151661009
Molex 151661009 is a UL-approved flat cable with a rated voltage of 60V. It features a tin-finished copper alloy conductor and polyester insulator, suitable for applications requiring a max operating temperature of 105°C and min operating temperature of -40°C. With 31 conductors and a wire gauge of AWG37, it has a cross-sectional area of 0.01 mm2 and resistance of 2.2 ohm, making it ideal for electrical wiring needs.
151661019
Molex 151661019 flat cable with UL approval, rated for 60V and 105°C. Features tin finish copper alloy conductor, polyester insulation, and 31 conductors in 0.01 mm2 cross section area. Ideal for electrical wiring applications requiring flexibility and durability in a wide temperature range.
151661014
Molex 151661014 flat cable with UL approval, rated for 60V, features 31 conductors of tin-finished copper alloy. With a max operating temp of 105°C and -40°C min, it's ideal for electrical wiring applications requiring flexibility and durability in various environments.
151660325
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Insulator Material: POLYESTER; Conductor Finish: TIN;
151670321
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; MIL Conformity: NO; Maximum Operating Temperature: 105 Cel;
151660119
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Cross Section Area: .01 mm2; Length: .051 mm;
151670365
Molex 151670365 flat cable with 20 conductors, UL approval, rated for 60V & 0.5A. Constructed with tin-finished copper alloy conductor and polyester insulator. Ideal for electrical wiring applications requiring -40 to 105 °C operating temperature range.
151661038
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Conductor Finish: TIN;
151660989
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Additional Features: FLAME RESISITANT;
151661059
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Construction: FLAT; Minimum Operating Temperature: -40 Cel;
151660984
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Construction: FLAT; Resistance: 2.2 ohm;
151670313
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; Conductor Finish: TIN;
151661013
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Length: .76 mm; Maximum Operating Temperature: 105 Cel;
151660988
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Maximum Operating Temperature: 105 Cel;
151661054
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Wire & Cable Name: FLAT CABLE; Minimum Operating Temperature: -40 Cel;
151660215
Molex 151660215 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin-finished copper alloy conductor, polyester insulator, and 20 conductors at 0.01 mm2 cross-section area. Ideal for electrical wiring applications requiring flexibility and durability in various environments.
151661048
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; Cross Section Area: .01 mm2; Conductor Finish: TIN;
151660327
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .35 A; Shielding: NO; DIN Conformity: NO; No. of Conductors: 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved