Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 153660431 flat cable with UL approval, shielded design, and tin finish conductor. Ideal for FFC connectors in applications requiring 60V voltage rating, -40 to 105 °C operating temperature range, and 0.015 mm2 cross section area.
Median Price
$5.148
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Newark
1+ parts
$1.140
100+ parts
1k+ parts
-
10k+ parts
Interstate Connecting
$4.588
$3.845
Mouser Electronics
$6.210
$4.880
$4.460
DigiKey
$7.450
$5.280
$4.348
Distrelec
$8.798
Verical
$5.627
$5.200
Master Electronics
$4.580
$4.510
Powell Electronics
$4.670
$4.590
Chip1Stop
$6.040
Heilind Electronics
$4.522
Digiode
$2.394
Nova Conductors
$4.222
VNN
Vyrian
TME
$5.270
IBS Electronics
$5.112
$4.200
$4.150
Corphita
$2.268
Andel Nordic
$3.261
$3.131
Aranea Global
$4.138
$3.972
Continental Prestige Electronics
Argo Parts USA
Having UL approval ensures that this product meets safety standards and is reliable for use in electrical applications.
The shielding helps protect the cable from electromagnetic interference, ensuring good signal quality and reducing the risk of data loss.
The high rated voltage of 60V makes this cable suitable for a wide range of low voltage applications, providing versatility in usage.
The conductor finish of TIN enhances the conductivity of the cable, improving the overall performance and efficiency.
With a high maximum operating temperature of 105°C, this cable can withstand heat and operate effectively in various environmental conditions.
The low minimum operating temperature of -40°C ensures that the cable remains functional even in extremely cold conditions, making it reliable for diverse environments.
The small wire gauge of 35 indicates a thin conductor, making this cable suitable for applications where space is limited or flexibility is required.
The specific length of 0.102 mm ensures that the cable can be utilized for precise connectivity requirements, reducing waste and saving costs.
With FFC connectors on both sides, this cable offers easy and secure connections, minimizing installation time and ensuring reliable performance.
The small cross-sectional area of 0.015 mm2 indicates a compact and lightweight cable, ideal for applications where space and weight are crucial factors.
Using copper as the conductor material ensures high conductivity, durability, and resistance to corrosion, resulting in a reliable and long-lasting cable.
The low resistance of 1.46 ohm helps minimize power loss and ensures efficient transmission of electrical signals, making this cable energy-efficient.
With a rated current of 0.5 A, this cable is suitable for low power applications and ensures safe operation within the specified current limits.
The flat cable design offers flexibility and easy installation in tight spaces, making it an ideal choice for applications where traditional round cables may not be suitable.
Electrical Wires & Cables 153660431 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Length:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
General Semiconductor
Fagor Electronica S Coop
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
982661014
Molex
Molex 982661014 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a max operating temperature of 105°C and min of -40°C, this 0.03 mm2 cross-section cable has 31 conductors and is ideal for low current (0.5A) electrical wiring needs.
5010/25CSL001
Alpha Wire
Alpha Wire 5010/25CSL001 is a stranded wire with PVC jacket, rated for 300V. With 25 conductors of copper alloy and tin finish, it's ideal for flexible cord and fixture wire applications. Operating temperatures range from -35 to 105°C, making it suitable for various electrical setups.
CC174RP-15
Infinite Electronics International
CABLE ASSEMBLY;
2147501032
374009-01
Qualtek Electronics
Qualtek Electronics' 374009-01 power cable has a rated voltage of 125V and max operating temperature of 70°C. With approvals from SAA, it features connectors AS3112 and IEC60320 C13, suitable for various electrical applications requiring a current rating of 10A.
2205305-1
TE Connectivity's 2205305-1 wire is designed for power and signal applications, with a rated voltage of 300V and insulator material made of PTFE. It can operate in temperatures ranging from -40°C to 150°C, suitable for various electrical wiring needs with its 24 AWG wire gauge and 31 conductors.
M17/113-RG316
Times Microwave Systems
WIRE AND CABLE; Shielding: YES; MIL Conformity: YES; Conductor Finish: SILVER; Minimum Operating Temperature: -55 Cel; Insulator Material: PTFE;
44A0111-22-911
TE Connectivity's 44A0111-22-911 wire is MIL-W-81044 approved with a 600V rating. Featuring stranded construction, radiation-crosslinked PVF jacket, and tin finish copper alloy conductor, it operates b/w -65 to 135 °C. Ideal for applications requiring flexible cord and fixture wire up to 0 AWG size.
M22759/11-22-0
Belden
Belden's M22759/11-22-0 wire is MIL-W-22759 approved with 600V rating, suitable for internal wiring in electronics. Features silver-coated copper alloy conductor, PTFE insulation, and can operate up to 200°C. Stranded construction with 19X34 stranding and 0.326 mm2 cross-section area make it a flexible cord and fixture wire choice.
M22759/11-26-9
Defense Logistics Agency
M22759/11-26-9 by Defense Logistics Agency is a MIL-approved stranded wire with silver finish, rated for 600V. Constructed with copper conductor, extruded PTFE insulator, and operating temperature up to 200°C. Ideal for flexible cord and fixture wire applications.
63838
Helukabel
WIRE AND CABLE;
1110751004
Wires and Cables;
2147501042
135101-04-M0.50
Amphenol
3365/16
3m Electronic Products Division
3365/16 by 3M Electronic Products Division is a UL-approved FLAT FLEXIBLE CABLE with 16 conductors of TINNED COPPER. Featuring STRANDED construction, it has a wire gauge of 28 AWG and can operate b/w -20 to 105 °C. Ideal for electrical applications requiring flexibility and durability in confined spaces.
55A0111-22-96
TE Connectivity's 55A0111-22-96 is a stranded electrical wire with a rated voltage of 600V and conductor finish of TIN. It is used for general purpose applications, lightweight, and has a max operating temperature of 150°C.
TC2030-MCP-NL
Tag-connect
CABLE ASSEMBLY; Connector Side-1: TAG6PIN; Connector Side-2: RJ12; Shielding: NO; DIN Conformity: NO; MIL Conformity: NO;
M22759/11-20-0
Specialty Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Conductor Finish: SILVER; Stranding: 19X32;
M22759/16-22-9
Carlisle Interconnect Technologies
M22759/16-22-9 by Carlisle IT is a MIL-approved stranded wire with 600V rating, featuring tin finish and ETFE insulation. Ideal for aerospace applications, it operates b/w -55°C to 150°C, with 22 AWG copper conductor and resistance of 0.053 ohm.
PMHDMF-0.5
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
153660984
CABLE ASSEMBLY; Connector Side-1: FFC; Connector Side-2: FFC; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: YES;
153660989
153661048
Molex 153661048 is a UL-approved shielded flat cable with a rated voltage of 60V. It has a tin conductor finish and can operate in temperatures ranging from -40 to 105 °C. This cable assembly, made of copper, is suitable for FFC connectors and has a cross-section area of 0.015 mm2.
153660215
153661049
153660219
153660537
153660211
Molex 153660211 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating range. Ideal for FFC connectors in applications requiring 0.015mm2 copper conductor and 1.46 ohm resistance at 0.5A current.
153660119
153660207
153660317
Molex 153660317 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660097
153660427
153661028
153661029
Molex 153661029 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660101
1536146
Phoenix Contact
1536117
1536159
153660445
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved