Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 153661049 flat cable with UL approval, shielded, rated for 60V & 105°C. Features tin-finished copper conductor, AWG 35 gauge, 0.015mm² cross-section area. Ideal for FFC to FFC connections in applications requiring reliable signal transmission.
Median Price
$8.628
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
Andel Nordic
$4.623
$4.438
Continental Prestige Electronics
$8.470
$8.301
AZTECH Wire
$9.469
Argo Parts USA
Corphita
Bastille Electronics
Having UL approval ensures that the product meets safety standards and regulations, giving customers peace of mind when using the electrical wires and cables.
The shielding helps to protect the wires and cables from electromagnetic interference, ensuring a stable and reliable connection for electronic devices.
The rated voltage of 60V is suitable for a wide range of low voltage applications, making this product versatile and adaptable to various uses.
The tin conductor finish enhances conductivity and corrosion resistance, ensuring efficient and long-lasting performance of the wires and cables.
With a high maximum operating temperature of 105°C, this product can withstand elevated temperatures, making it suitable for use in hot environments or applications.
The low minimum operating temperature of -40°C ensures that the wires and cables can function effectively even in cold conditions, providing reliable performance in various environments.
The small wire gauge of 35 makes this product suitable for applications where space is limited, allowing for more flexibility in installation and use.
The specific length of 0.254 mm provides enough wiring for standard electronic connections, making it convenient and practical for various projects.
The FFC connector on side-1 allows for easy and secure connections to compatible devices, simplifying installation and maintenance processes.
Having an FFC connector on side-2 ensures a secure and reliable connection to the corresponding device, contributing to the overall stability and performance of the wiring setup.
The small cross-sectional area of 0.015 mm2 makes this product suitable for low current applications, ensuring optimal performance with minimal power loss.
Using copper as the conductor material ensures high conductivity and durability, making the wires and cables efficient and reliable for transmitting electrical signals.
The low resistance of 1.46 ohm minimizes power loss and voltage drop along the wires and cables, ensuring efficient energy transmission and better overall performance.
The rated current of 0.5 A is suitable for low power applications, providing the right amount of current capacity for safe and reliable operation.
The flat cable design offers flexibility and space-saving benefits, making it ideal for applications where traditional round cables may be too bulky or cumbersome.
Electrical Wires & Cables 153661049 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Cross Section Area:
DIN Conformity:
IEC Conformity:
Length:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99WT1G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Gec Plessey Semiconductors
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kingwell Technonlogy
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
111005-1040
Molex
CABLE ASSEMBLY;
107-1
Standard Wire & Cable
Standard Wire & Cable's 107-1 is a MIL-approved stranded wire with nylon jacket, rated at 600V. Featuring tin-finished copper conductor, PVC insulator, and operating temp of 105°C. Ideal for applications requiring flexible cord and fixture wire in various industries.
55A0111-16-9
TE Connectivity
TE Connectivity's 55A0111-16-9 wire is a CSA, CAA, MIL, UL approved stranded cable with a rated voltage of 600V. Featuring a tin finish and copper alloy conductor material, it operates b/w -65°C to 150°C. Ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.
3580/15SL005
Alpha Wire
WIRE AND CABLE;
U3A00057-3M
Infinite Electronics International
3365/10SF
3m Electronic Products Division
The 3m Electronic Products Division 3365/10SF is a UL-approved flat flexible cable with 10 conductors, each made of tinned copper. Featuring a stranded construction with 7X36 stranding and PVC insulation, it operates b/w -20°C to 105°C. Ideal for electrical applications requiring a rated voltage of 300V in various industries.
3365/10-100SF
3m Electronic Products Division's 3365/10-100SF is a FLAT FLEXIBLE CABLE with 7 STRANDED conductors, TIN finish, and UL/CUL approvals. Rated at 300V, it has a wire gauge of 28 AWG and length of 30.48mm. Ideal for electrical applications requiring flexibility and durability.
151660317
Molex 151660317 is a UL-approved flat cable with a rated voltage of 60V. It features a tin conductor finish, polyester insulator material, and can operate b/w -40 to 105 °C. With 30 conductors and a wire gauge of AWG37, it is suitable for various electrical wiring applications.
44A0111-12-0-MX
TE Connectivity's 44A0111-12-0-MX is a 600V electrical wire with TIN finish, suitable for temperatures ranging from -65 to 150°C. Featuring 12 AWG copper alloy conductor, it is ideal for flexible cord and fixture wire applications.
M17/60-RG142
Carlisle Interconnect Technologies
Carlisle Interconnect Technologies' M17/60-RG142 is a solid construction communication cable with FEP jacket and PTFE insulator. Featuring shielding, it has 18 AWG wire gauge for reliable signal transmission. Ideal for applications requiring secure data communication in various industries.
55A1816-24-9-9CS2275
TE Connectivity's 55A1816-24-9-9CS2275 is a flexible cord and fixture wire with a rated voltage of 600V. Featuring nickel conductor finish, it has a temperature range from -65°C to 200°C. This cable type is commonly used in applications requiring MIL-DTL-27500 compliance.
34137
Helukabel
WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Wire Gauge (AWG): 18; Construction: STRANDED; Insulator Material: POLYETHYLENE;
C3365/20100
DCPLUG-P1J-R7B
Mean Well Enterprises
M22759/43-24-9
Judd Wire
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Stranding: 19X36; Resistance: .08 ohm; Insulator Material: ETFE;
M17/113-RG316
WIRE AND CABLE; Shielding: YES; Construction: STRANDED; Wire Gauge (AWG): 25; Wire & Cable Name: COMMUNICATION CABLE; Insulator Material: PTFE;
55PC0211-20-9CS2502
TE Connectivity's 55PC0211-20-9CS2502 is a flexible cord with 600V rating, TIN finish, and copper alloy conductor. With -65 to 150 °C operating range, it suits electrical applications needing 20 AWG wire gauge and SPEC 55 cable type.
M17/176-00002
Vertiv
WIRE AND CABLE; Rated Voltage: 1000 V; Shielding: YES; Approvals (V): MIL; No. of Conductors: 2; Jacket Material: PFA;
6547FE8771000
Belden
FFSD-10-D-12.00-01-N
Samtec
Samtec's FFSD-10-D-12.00-01-N is a UL-approved stranded flat cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a max operating temperature of 105°C and min of -40°C. With 20 conductors, each 0.305mm long, this cable features socket connectors on both ends and a cross-section area of 0.0509mm².
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
153660984
CABLE ASSEMBLY; Connector Side-1: FFC; Connector Side-2: FFC; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: YES;
153660989
153661048
Molex 153661048 is a UL-approved shielded flat cable with a rated voltage of 60V. It has a tin conductor finish and can operate in temperatures ranging from -40 to 105 °C. This cable assembly, made of copper, is suitable for FFC connectors and has a cross-section area of 0.015 mm2.
153660215
153660219
153660537
153660211
Molex 153660211 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating range. Ideal for FFC connectors in applications requiring 0.015mm2 copper conductor and 1.46 ohm resistance at 0.5A current.
153660119
153660207
153660317
Molex 153660317 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660097
153660427
153661028
153660431
153661029
Molex 153661029 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660101
1536146
Phoenix Contact
1536117
1536159
153661006
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved